Fisher-Price W9913 User manual

W9913
W9913
• Please keep this instruction sheet for future reference,
as it contains important information.
• Adult assembly is required.
• Tool required for assembly: Phillips screwdriver
(not included).

2
Important Information
WARNING
Prevent Entanglement Injury
Crib Mobile Use
• Keep out of baby's reach.
• Remove mobile from crib or playpen when baby begins to push
up on hands and knees.
• This product may not attach to all crib designs. Do not add
additional strings or straps to attach to a crib or playpen.
Stroller Toy Use
• Do not attach link directly to crib or playpen.
CAUTION
This package contains small parts. For adult assembly only.
• Use as a mobile from birth until 5 months.
• A mobile is intended for visual stimulation and not to be grasped by a child.
Care
• Wipe this toy with a clean, damp cloth. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not take this toy apart.

3
Assembled Parts
Arm
(Upper)
Mobile
Mobile Link
Giraffe
Screw is shown actual size.
Tighten all screws with a Phillips screwdriver.
Do not over-tighten the screws.
M3,5 x 15 mm Screw – 5
Mobile Link Cover
Arm
(Lower)
Base

4
Assembly
• Fit the lower arm into the socket in the back of the base.
Hint: You may need to pull the attachment strap on the base down to fit the arm
in the base.
Arm
(Lower)
Base Socket
• Insert a screw into the lower arm and tighten.
1
2

5
Assembly
• Fit the upper arm to the lower arm.
Arm
(Upper)
Arm
(Lower)
3

6
Assembly
• Insert four screws into the arm assembly and tighten.
• First, align the tabs on the end of the arm with the slots in the back of the giraffe.
• Then, turn the giraffe to "snap" in place on the end of the arm.
©2012 Mattel, Inc. All Rights Reserved.
PRINTED IN CHINA W9913b-0920
Arm Tabs
Giraffe Slots
4
5

7
• Fit the flat end of the mobile link into the groove in the mobile.
• Fit the mobile link cover onto the top of the mobile.
• Tighten the screws.
Hint: The screws are assembled to the mobile link cover.
Mobile Link
Mobile Groove
Mobile Link Cover
Mobile Link
Assembly
6
7

8
• Fit the ends of the mobile link onto the mobile arm.
• Push to “snap” the link in place.
Mobile Arm
Mobile Link
Assembly
8

9
Mobile Use Crib Attachment
IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.)
tightly to a crib or playpen according to the instructions. Do not add additional
strings or straps to attach to a crib. Check frequently.
• Position the toy inside the crib.
• Wrap the toy’s attachment strap around the crib top horizontal rail.
• Slide the end of the attachment strap through the slot on the back of the toy.
• Pull the end of the attachment strap up and fasten to the slot on the peg on the
back of the toy.
Note: This toy should be snug against the crib rail and spindles. Use the strap
slot that provides the tightest fit.
• If you have excess strap, slide the free end of the attachment strap under the
slot at the top of the attachment strap.
Crib Rail
Attachment Strap
Attachment Strap
Slot
Slot
Peg
Peg
1

10
Mobile Use Crib Attachment
• Make sure the distance between the bottom of the product and the crib
mattress is at least 7 inches (18 cm).
• If the distance is less than 7 inches (18 cm): readjust the attachment straps to
lift the product; or lower the crib mattress.
Mattress
Mattress
Crib Spindle
Crib Spindle
Bottom of Base
Bottom of Base
At Least 7 Inches (18 cm)
At Least 7 Inches (18 cm)
• Tie the toy’s strings to a crib spindle.
Note: It is better to tie the strings in a knot than a bow, since a bow may be
easily untied.
2
3