Fiskars Gifting Board User manual

Scoring stylus
stores in board
Box height
adjusts up to 4"
Box width
adjusts up to 4"
Box paper size guide
Dashed lines for
bow making
Extendable scoring arm
for up to 12" x 12" paper
Score linesNotch punch
Raised ruler
Box
instructions
1. Set BOX HEIGHT and BOX WIDTH. 3. Place paper ush against raised ruler and BOX
WIDTH bar. Punch notch.
7. Punch lock on all corners.
5. Repeat steps 3 and 4 on remaining sides.
2. Check indicated BOX PAPER SIZE GUIDE and
trim paper to square size.
4. Score all three lines with stylus.
1
2
3
8. Fold to assemble.
6. Flip paper over. Align and punch all sides.
Make a box
Gifting Board Instruction Manual

Make an envelope
3. Rotate counter-clockwise 90 degrees. Align scored
line on paper over SCORE LINE 1. Punch notch.
Score along SCORE LINE 2.
4. Repeat step 3 twice. 5. Round all corners with punch. 6. Fold and secure wings with adhesive.
2. Place paper ush against raised ruler with end
beneath correct RULER POSITION (see printed
chart). Punch notch. Score along SCORE LINE 2.
2
2
1. Select CARD SIZE and check PAPER SIZE on
printed chart. Trim paper to size.
Make a bow
1. Select PAPER SIZE on printed chart’s BOW
GUIDE (black section). Trim paper to size.
3. Place paper ush against raised ruler with end
beneath RULER POSITION 1 (see printed chart).
Punch notch. Flip paper over and repeat.
4. Rotate paper 180 degrees and repeat step 3. 5. Place paper ush against raised ruler with end
beneath RULER POSITION 2 (see printed chart).
Punch notch. Flip paper over and repeat.
6. Bring notched intersections together to form a
bow and secure with adhesive.
2. Place end of paper strip beneath notch punch.
Center using dashed lines. Punch notch. Repeat
on other end.
*Certain-sized envelopes may result in overhanging tabs. To correct, simply use the included stylus to score, then trim excess paper as needed.