Please keep this User Manual for future
another user, be sure that they also receive
this instruction booklet.
Unpack and check carefully there is no
transportation damage before using the
Before operating, ensure that the voltage
and frequency of power supply match the
It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
Disconnect main power before servicing
and maintenance.
only, but always by taking its base.
WARNING! The 3R MH has a powerful pan motor. The torque reaction when the head
surface. Do not apply power to the 3R MH unless the baase is securely fastened to a surface
or to rigging hardware.
WARNING!
clockwise.
WARNING!
use any type of clamp that does not completely encircle the structure when fastened.
WARNING!
See Figure 2. The
LMH 150W Spot lens can focused the sun's rays, creating a potential fire hazard and causing
damage.
IMPORTANT!3RM H, as intense
illumination can damaged the display.
Don’t operate it where the temperature is
higher than this.
In the event of serious operating problem,
carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare
parts.
Do not connect the device to any dimmer
pack.
Do not touch any wire during operation
and there might be a hazard of electric
shock.
To prevent or reduce the risk of electrical
rain or moisture.
visibly damaged.
2. SAFETY INFORMATION
1. INTRODUCTION
3RMovingHead3in1 BEAM+SPOT+WASH-ZOOM
WARNING!
User Manual •Instrukcja Obsługi
Figure 2.
