Flash F7100330 User manual

User Manual
Instrukcja Obsługi
F7100330
LED PAR 64
18x10W RGBW 4w1
IP65

Please keep this User Manual for future
      
another user, be sure that they also receive
this instruction booklet.
Unpack and check carefully there is no
transportation damage before using the

Before operating, ensure that the voltage
and frequency of power supply match the

It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
Disconnect main power before servicing
and maintenance.


only, but always by taking its base.
Do not use the device in high humidity
conditions. Use in -10°C to +35°C
WARNING! The LED PAR 64 has a powerful pan motor. The torque reaction when the head

surface. Do not apply power to the LED PAR 64 unless the baase is securely fastened to a
surface or to rigging hardware.
WARNING! 
Lock each clamp with both 1/4-turn fasteners. Fasteners are locked only when turned a full
90clockwise.
WARNING! 
with the yoke hanging vertically downwards, use two clamps of half-coupler type. Do not
use any type of clamp that does not completely encircle the structure when fastened.
WARNING! 
or any other strong light source from any angle - even for a few seconds. See Figure 2. The
LMH 150W Spot lens can focused the sun's rays, creating a potential fire hazard and causing
damage.
IMPORTANT!LED PAR 64, as
intense illumination can damaged the display.
In the event of serious operating problem,
     

carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare
parts.
Do not connect the device to any dimmer
pack.
Do not touch any wire during operation
and there might be a hazard of electric
shock.
To prevent or reduce the risk of electrical
  
rain or moisture.

visibly damaged.
Do not look directly at the LED
      
WARNING!
to the power supply in order to avoid
condensation.
2. SAFETY INFORMATION
1. INTRODUCTION
    LED PAR 64 18x10W RGBW 4w1 IP65  
        

WARNING!
User Manual •Instrukcja Obsługi
Figure 2.


LED PAR 64 18x10W RGBW 4w1 IP65 •Art No F7100330
Light: LED 4in1



adjustable

housing
Waterproof: IP65
       
holes on the bracket. Always ensure that
       
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit’s
5.1 Connecting DMX signal
     

4. INSTALLATION
5. CONNECTION
3. PRODUCT INFORMATION
4/8 DMX channel mode.

Power supply: 110-240V AC, 50-60Hz
Power consumption: 140 W




weight. Also always use a safety cable that
can hold 12 times of the weight of the unit



of people and has no one pass by or under
it.
      
interfaces:


1
3
22
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
3
1
CAUTION!     
DMX signal has to be terminated with a



DMX
Controller DMX 512 DMX 512
1
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
45



The connection is performed using
power cable with PowerCon connector
(included). The device must be
operated by qualified personnel.
5.2 Voltage specification
Input Voltage Total Power Frequency
110-240V 140W 50/60Hz
5.3 Connecting power supply
CAUTION! In the case of cable damage do not attempt to repair.

a person with appropriate permissions.
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not

Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s


reduce the life span of lamps and bulbs; intermittent using will
improve the life of bulbs and lamps.
6. DMX CHANNELS
4 CH Mode
User Manual •Instrukcja Obsługi
CH Function Value Description
1 Red 0-255 R - dimmer, Linear, Dark to Bright
2 Green 0-255 G - dimmer, Linear, Dark to Bright
3 Blue 0-255 B - dimmer, Linear, Dark to Bright
4 White 0-255 W - dimmer, Linear, Dark to Bright

6. DMX CHANNELS
8 CH Mode

CH Function Value Description
1 Dimmer 0-255 R - G - B - Dimmer, Linear, Dark to Bright
2 Red 0-255 R - dimmer, Linear, Dark to Bright
3 Green 0-255 G - dimmer, Linear, Dark to Bright
4 Blue 0-255 B - dimmer, Linear, Dark to Bright
5 White 0-255 W - dimmer, Linear, Dark to Bright
6 Strobe 0-255 Strobe
7 Sound activated 1-79 Macro Function, Sound Activated
8 Speed 0-255
No. Display Function
1 D001 1-512 4/8 CHs Address Code
Change the address code by B or C button
2 CHAL 1-99 4/8 Colors Changing
Autorun
3 CC01 Pulsive changing
4 CP01 1-99 4/8 Colors mixed changing
Speed of gradual changing by B or C
button
5 CL00 1-99 4/8 Colors mixed changing
Select color. While change color, with B or
C button
6 BEBE Sound activate
7 R001 0-255 Red color Changing
Change the color by B or C button
8 G001 0-255 Green color Changing
Change the color by B or C button
9 B001 0-255 Blue color Changing
Change the color by B or C button
10 W001 0-255 White color changing
Change the color by B or C button
11 CO33 1-85
LED PAR 64 18x10W RGBW 4w1 IP65 •Art No F7100330

OSTRZEŻENIE!
UWAGA!             

UWAGA!         


UWAGA!           
Quick Half
Coupler - (Hak)
UWAGA!            

przez kilka sekund. Patrz rysunek 2

WAŻNE!           

Rysunek 2. 

User Manual •Instrukcja Obsługi

2. ZASADY BEZPIECZENSTWA
3. INFORMACJE O PRODUKCIE
4. INSTALACJA
    LED PAR 64 18x10W RGBW 4w1 IP65 
       


przez wykwalifikowany personel, aby
  

    


    
    

   

do sieci elektrycznej.

   
w zakresie od temperatur od -10°C do
+35°C
     
  

    
stabilnych konstrukcjach.
    
w dobrze wentylowanym pomieszczeniu,
     

     
     

UWAGA!
     
kondensacji.


   
     
    

uszkodzenia spowodowane niestabilnym

    
      
   
     
    
   

    

Light: LED 4in1.




4/8 DMX channel mode.



Waga netto: 5kg


Waga(karton):5,6 kg
LED PAR 64 18x10W RGBW 4w1 IP65 •Art No F7100330

DMX
Controller DMX 512 DMX 512
User Manual •Instrukcja Obsługi
5.2 Specyfikacja zasilania

Napięcie Zasilania Pobór Mocy Częstotliwość zasilania
110-240V 180W 50/60Hz

    
    

5. POLACZENIA

interfejsy:




1
3
22
ŻEŃSKI
XLR
GROUND
DMX +
DMX -
MĘSKI
XLR
3
1
    




UWAGA! 


wykwalifikowany personel techniczny.
    
    
     
  
poboru energii elektrycznej z sieci.
ŻEŃSKI
XLR
1
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
45



6. LISTA KANALOW DMX
8 CH Mode
4 CH Mode
LED PAR 64 18x10W RGBW 4w1 RGBW IP65 •Art No F7100330
CH Function Value Description
1 Dimmer 0-255 R-G-B - dimmer, Liniowo, Ciemny do Jasnego
2 Czerwony 0-255 R - dimmer, Liniowo, Ciemny do Jasnego
3Zielony 0-255 G - dimmer, Liniowo, Ciemny do Jasnego
4 Niebieski 0-255 B - dimmer, Liniowo, Ciemny do Jasnego
5Biały 0-255 W - dimmer, Liniowo, Ciemny do Jasnego
6 Stroboskop 0-255 Stroboskop
7 Aktywacja
Dźwiękiem
1-79 Macro Funkcje, Aktywacja Dźwiękiem
8 Speed 0-255
CH Function Value Description
1 Czerwony 0-255 R - dimmer, Liniowo, Ciemny do Jasnego
2Zielony 0-255 G - dimmer, Liniowo, Ciemny do Jasnego
3 Niebieski 0-255 B - dimmer, Liniowo, Ciemny do Jasnego
4Biały 0-255 W - dimmer, Liniowo, Ciemny do Jasnego

User Manual •Instrukcja Obsługi
Nr Wyświetlacz Funckcje
1 D001 1-512 4/8 CHs Kod Adresu
Zmiana kodu przez przycisk B lub C
2 CHAL 1-99 4/8 Zmiana koloru
Autostart
3 CC00 Zmiana Pulsacji
4 CP01 1-99 4/8 CHs Mieszanie Kolorów
Szybkość stopniowych zmian za pomocą
przycisków B lub C
5 AU50 1-99 4/8 CHs Mieszanie Kolorów
Wybór koloru za pomocą przycisków B lub C
6 BEBE Aktywacja Dźwiękiem
7 R001 0-255 Czerwony. Zmiana Koloru.
Zmiana koloru za pomocą przycisku B lub C
8 G001 0-255 Zielony. Zmiana Koloru.
Zmiana koloru za pomocą przycisku B lub C
9 B001 0-255 Niebieski. Zmiana Koloru.
Zmiana koloru za pomocą przycisku B lub C
10 W001 0-255 Biały. Zmiana Koloru.
Zmiana koloru za pomocą przycisku B lub C
11 CO33 1-85


LED PAR 64 18x10W RGBW 4w1 RGBW IP65 •Art No F7100330

www.flash-butrym.pl
F7100330