Flashforge Cura Manual

Cura Setup for Flashforge Dreamer
Step 1: Launch Cura
Step 2: Add Your 3D Printer
2.1 Option 1: Settings -> Printer -> Add Printer
Option 2: On the main interface, click the Printer section, then click Add printer in the dropdown.
2.2 On the pop-up window, please find Flashforge in the left list, then fill in your Printer name on
the right. Click Add to proceed.

2.3 On the Machine Settings window, kindly fill in the Printer spec as suggested in the red. Switch
to Extruder 1 to confirm the extruder setting as suggested in the red. Then click Next to proceed.
Printer Setting
Printhead Setting
X (Width) 230.0
Y (Depth) 150.0
Z (Height) 140.0
Build plate shape: Rectangular
Original at Center √
Hotend bed √
G-code flavor Marlin
X min -20
Y min -10
X max 10
Y max 10
Gantry Height 140.0
Number of Extruders 1
Start G-code：
End G-code：

G28
M132 X Y Z A B
G1 Z50.000 F420
G161 X Y F3300
M7 T0
M6 T0
M651 S255
M907 X100 Y100 Z40 A80 B20
M104 S0 T0
M140 S0 T0
G162 Z F1800
G28 X Y
M132 X Y A B
M652
G91
M18
Nozzle Settings
Compatible material diameter 1.75
Nozzle offset X 0.0
Nozzle offset Y 0.0
Cooling fan number 0
Extruder Start G-code
M108 T0
Note: Cura sliced files are only available for printing with Dreamer’s right extruder.
Step 3: Select Nozzle Size
Once the printer is added, you may go to Settings -> Extruder 1 -> Nozzle Size to select your printer’s
nozzle size as 0.4mm.

Step 4: You may now create new project and start slicing
Hope this helps. If you need any assistance on slicing or printing, Flashforge’s dedicated support
team is only an email away. Feel free to drop us a line at [e-mail] .