FLIR PatrolIR B User manual

PatrolIR B
Document # 427-0026-01-10
Version 110, Oct 2010
User’s Guide
Pan and Tilt

© FLIR Systems, Inc., 2010. All rights reserved worldwide. No parts
of this manual, in whole or in part, may be copied, photocopied,
translated, or transmitted to any electronic medium or machine
readable form without the prior written permission of FLIR Systems,
Inc.
Names and marks appearing on the products herein are either
registered trademarks or trademarks of FLIR Systems, Inc. and/or
its subsidiaries. All other trademarks, trade names, or company
names referenced herein are used for identification only and are the
property of their respective owners.
This product is protected by patents, design patents, patents
pending, or design patents pending.
This document is controlled to FLIR Technology Level 1. The
information contained in this document pertains to a dual use
product controlled for export by the Export Administration
Regulations (EAR). FLIR trade secrets contained herein are subject
to disclosure restrictions as a matter of law. Diversion contrary to
U.S. law is prohibited. U.S. Department of Commerce authorization
is not required prior to export or transfer to foreign persons or
parties unless otherwise prohibited.
PatrolIR B
70 Castilian Drive
Goleta, CA 93117
Phone: [phone].FLIR
(+1.888.747.3547)
www.flir.com
Revision History
Revision Date Comment
100 July 2009 First release
110 Oct 2010 Added JCU information & other
minor changes

427-0026-01-10, version 110 Oct 2010 iii
Table of Contents
1 Warnings and Cautions
2 Introduction
3 Getting Started
3.1 Parts List .................................................................... 5
3.2 Operational Overview ..................................................... 5
3.3 Installation ................................................................... 6
3.3.1 Camera Mounting ................................................ 8
3.3.2 Fuse and Joystick Control Unit Mounting ............... 11
3.4 Using your PatrolIR B .................................................. 13
3.4.1 Joystick Control Unit (JCU) .................................. 13
4 Caring for your PatrolIR B
4.1 Troubleshooting ......................................................... 17
4.2 Replacing the fuses .................................................... 17
4.2.1 Cleaning ........................................................... 18
5 Optional Accessories
5.1 Optional JCUs and Extension Cables ............................. 19
6 Technical Data
6.1 Performance Specifications .......................................... 21
7 Mounting Templates
7.1 Camera Mounting Template. ........................................ 23
7.2 Joystick Control Unit Mounting Template. ....................... 25
PatrolIR B Pan and Tilt User’s Guide

iv Oct 2010 427-0026-01-10, version 110

427-0026-01-10, version 110 Oct 2010 1
1 Warnings and Cautions
This guide uses the term Caution to indicate a potentially hazardous
situation, which, if not avoided, may result in injury, damage to the
vehicle or PatrolIR B, or other property damage.
Warnings and Cautions:
Do not operate any function that takes your attention
away from safely driving your vehicle.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do so
may result in an accident.
Use this product for mobile 12VDC applications.
PatrolIR B is designed for commercial, over-the-road, automotive
applications. While many other applications are possible, each user
should carefully consider additional protection and installation
methods that might be required for a given application. Mechanical,
environmental and electrical requirements should be evaluated to
assure that the PatrolIR B can be utilized with satisfactory results.
Particular attention needs to be given to the electrical system that
will power the PatrolIR B as the unit is designed for the automotive
12VDC power environment and conforms to ISO 7637-2
requirements for transients and disturbances on the typical
automotive power system. If the PatrolIR B is installed in applications
other than commercial automobiles, additional power conditioning or
protection may be required.
Consult your local and state driving regulations prior to
installation.
In many states using active monitors in view of the driver is
prohibited. Consult your local and state driving regulations for laws
and guidelines. User assumes all risks and indemnifies the
manufacturer from any liability.
Caution! Failure to follow the caution may result in damage to
the equipment or injury.

1 – Warnings and Cautions
2 Oct 2010 427-0026-01-10, version 110
Minimize display viewing while driving.
Viewing the display may distract the driver from looking ahead and
may result in an accident. The PatrolIR B thermal imaging system
should not be used as a substitution for head lamps or head lamp
assisted human vision during vehicle operation.
When installing the PatrolIR B, do not block the vehicle’s
vents or radiator panels.
Doing so may result in heat buildup, equipment breakage, and/or
fire.
Caution! The PatrolIR B thermal imaging system is not intended
to be used as the primary navigation system. The PatrolIR B should
not to be used as a substitution for head lamps or head lamp
assisted human vision during vehicle operation. It should be used
only as an aid to cautious night-time driving.
Note: All thermal imaging systems are subject to export
control. Please contact FLIR for export compliance information
concerning your application or geographic area.

427-0026-01-10, version 110 Oct 2010 3
2Introduction
Congratulations!
The FLIR PatrolIR B is a state-of-the-art thermal imaging system that
will provide you with excellent night visibility and situational
awareness, without any form of natural or artificial illumination.
The PatrolIR B system is designed for simple, intuitive operation. The
basic system includes a camera assembly and a joystick control
panel.
The PatrolIR B uses standard 12 VDC battery power and the images
from the 320 x 240 pixel detector are compatible with virtually any
existing display and recorder that accepts composite video.
The PatrolIR B is available with NTSC output, the same format used
on common television and VCR video input in the Americas and
some Asian countries. It is also available with PAL output, the same
format used on common televisions and VCR video input in Europe.
The PatrolIR B features a wide field of view and is capable of
providing an image even in absolute darkness.

2 – Introduction
4 Oct 2010 427-0026-01-10, version 110
The upper image represents what the human eye sees looking at a
camouflaged subject in shady brush. The lower image is an infrared
thermal picture taken at the same moment as the visible image
above.
Figure 2-1: PatrolIR B Makes the Difference

427-0026-01-10, version 110 Oct 2010 5
3 Getting Started
3.1 Parts List
The PatrolIR B camera and its accessories are delivered in a box
which contains the items below.
3.2 Operational Overview
The PatrolIR B is easy to install and operate. The system operates
on 12 volts DC and there are no camera adjustments. The thermal
imaging camera inside the PatrolIR B is completely sealed and
extremely rugged. The camera has been qualified for operation in all
types of weather conditions over the specified operating
temperature range and includes an automatic window heater that
will prevent icing under most conditions.
• PatrolIR B camera with attached 30" integrated cables with
connectors
• Joystick Control Unit cable, 22' long
• Video cable with BNC video connector 22' long
• Pre-Wired Joystick Control Unit (JCU) with integrated power
cable (fuse holder, power leads)
Two JCU models available; they are functionally the same but
one is intended to be mounted horizontally and the other is
mounted vertically.
Camera FLIR PN
White color, NTSC, Horiz JCU 427-0026-01-00
White color, NTSC Export, Horiz JCU 427-0026-01-00S
White color, PAL, Horiz JCU 427-0026-02-00
White color, PAL Export, Horiz JCU 427-0026-02-00S
White color, NTSC, Vert JCU 427-0026-03-00
White color, NTSC Export, Vert JCU 427-0026-03-00S
White color, PAL, Vert JCU 427-0026-04-00
White color, PAL Export, Vert JCU 427-0026-04-00S
Mounting hardware for the camera, mounting hardware for the
Joystick Control Unit, 5-amp fuses, cable clips, and extra
electrical components
PatrolIR B Pan and Tilt User’s Guide 427-0026-01-10

3 – Getting Started
6 Oct 2010 427-0026-01-10, version 110
3.3 Installation
DO NOT separate the Camera from its base during installation.
PatrolIR B is designed for commercial, over-the-road, automotive
applications. While many other applications are possible, each user
should carefully consider additional protection and installation
methods that might be required for a given application.
Mechanical, environmental and electrical requirements should be
evaluated to assure that the PatrolIR B can be utilized with
satisfactory results. Particular attention needs to be given to the
electrical system that will power the PatrolIR B as the unit is
designed for the automotive 12VDC power environment and
conforms to ISO 7637-2 requirements for transients and
disturbances on the typical automotive power system.
If the PatrolIR B is installed in applications other than commercial
automobiles, additional power conditioning or protection may be
required.
Caution! The PatrolIR B should be installed by a trained
professional. Incorrect installation could void your warranty.