FLIR CP-6302 User manual

This document does not contain any export-controlled information.
Quasar™ Gen III
Installation
Manual
i
CP-6302-30-R
CP-6302-31-P
CP-6302-31-I
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020

This document does not contain any export-controlled information.
© 2020 FLIR Systems, Inc. All rights reserved worldwide. No parts of this manual, in whole or in part, may be copied,
photocopied, translated, or transmitted to any electronic medium or machine readable form without the prior written
permission of FLIR Systems, Inc..
Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR Systems,
Inc. and/or its subsidiaries. All other trademarks, trade names, or company names referenced herein are used for
identification only and are the property of their respective owners.
This product is protected by patents, design patents, patents pending, or design patents pending.
Photographs and images appearing in this manual may have been modified for illustrative purposes using commercial
image editing software and may not always reflect an actual product configuration.
The contents of this document are subject to change without notice.
For additional information visit www.flir.com or write to FLIR Systems, Inc.
FLIR Systems, Inc.
6769 Hollister Avenue
Goleta, CA 93117
Support: https://www.flir.com/support/
[e-mail]
Proper Disposal of Electrical and Electronic Equipment (EEE)
The European Union (EU) has enacted Waste Electrical and Electronic Equipment Directive
2012/19/EU (WEEE), which aims to prevent EEE waste from arising; to encourage reuse, recycling,
and recovery of EEE waste; and to promote environmental responsibility.
In accordance with these regulations, all EEE products labeled with the “crossed out wheeled bin”
either on the product itself or in the product literature must not be disposed of in regular rubbish bins,
mixed with regular household or other commercial waste, or by other regular municipal waste
collection means. Instead, and in order to prevent possible harm to the environment or human
health, all EEE products (including any cables that came with the product) should be responsibly
discarded or recycled.
To identify a responsible disposal method nearby, please contact the local waste collection or
recycling service, the original place of purchase or product supplier, or the responsible government
authority in the area. Business users should contact their supplier or refer to their purchase contract.
Document History
Version
Date
Comment
Ver. 1
Jan 17, 2018
Initial FLIR Release
Ver. 3
June 25, 2020
Replaced mounting information, added accessory information, and
updated sponge content
ii
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020

This document does not contain any export-controlled information.
Table of Contents
iii
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
1. Document Scope and Purpose ........................................................................................... 1
2. Installation ......................................................................................................................... 5
Waterproofing the Camera Cables ................................................................................ 52.1
Mounting the Camera .................................................................................................. 62.2
Wall Mount Bracket CX-ARMX-G3 ................................................................... 6
2.2.1
Wall Mount Bracket with Power Box CX-ELBX-G3 ............................................. 8
2.2.2
Gooseneck Mount with Power Box CX-GSNK-G3 .............................................. 9
2.2.3
Mount Adapters ............................................................................................ 10
2.2.4
Corner Adapter CX-CRNR-G3 ......................................................................................... 10
2.2.4.1
Pole Adapter CX-POLE-G3 .............................................................................................. 12
2.2.4.2
In-Ceiling Mount ........................................................................................... 12
2.2.5

This document does not contain any export-controlled information.
Document Scope and Purpose
1
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
1 Document Scope and Purpose
The purpose of this document is to provide instructions and installation procedures for physically mounting
CP-6302 Range cameras. After completing the physical installation, additional setup and configuration is
required before the camera can perform video analysis and detection (see the Quasar Gen III CP-6302
Range User Guide).
Note:
This document is intended for use by technical users who have a basic understanding of CCTV
camera/video equipment and LAN/WAN network connections.
Remarque:
Ce document est destiné aux utilisateurs techniciens qui possèdent des connaissances de base des
équipements vidéo/caméras de télésurveillance et des connexions aux réseaux LAN/WAN.
Warning:
Installation must follow safety, standards, and electrical codes as well as the laws that apply where the
units are being installed.
Avertissement:
L'installation doit respecter les consignes de sécurité, les normes et les codes électriques, ainsi que
la législation en vigueur sur le lieu d'implantation des unités.
DIsclaimer
Users of FLIR products accept full
responsibility for ensuring the suitability and
considering the role of the product detection
capabilities and their limitation as they apply to
their unique site requirements.
FLIR Systems, Inc. and its agents make no
guarantees or warranties to the suitability for
the users’ intended use. FLIR Systems, Inc.
accepts no responsibility for improper use or
incomplete security and safety measures.
Failure in part or in whole of the installer,
owner, or user in any way to follow the
prescribed procedures or to heed WARNINGS
and CAUTIONS shall absolve FLIR and its
agents from any resulting liability.
Specifications and information in this guide are
subject to change without notice.
Avis de non-responsabilité
Il incombe aux utilisateurs des produits FLIR de vérifier
que ces produits sont adaptés et d'étudier le rôle des
capacités et limites de détection du produit appliqués
aux exigences uniques de leur site.
FLIR Systems, Inc. et ses agents ne garantissent
d'aucune façon que les produits sont adaptés à l'usage
auquel l'utilisateur les destine. FLIR Systems, Inc. ne
pourra être tenu pour responsable en cas de mauvaise
utilisation ou de mise en place de mesures de sécurité
insuffisantes.
Le non respect de tout ou partie des procédures
recommandées ou des messages d'AVERTISSEMENT
ou d'ATTENTION de la part de l'installateur, du
propriétaire ou de l'utilisateur dégagera FLIR Systems,
Inc. et ses agents de toute responsabilité en résultant.
Les spécifications et informations contenues dans ce
guide sont sujettes à modification sans préavis.

This document does not contain any export-controlled information.
Document Scope and Purpose
2
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
A Warning is a precautionary message that indicates a procedure or condition where there are potential
hazards of personal injury or death.
Avertissement est un message préventif indiquant qu'une procédure ou condition présente un risque
potentiel de blessure ou de mort.
A Caution is a precautionary message that indicates a procedure or condition where there are potential
hazards of permanent damage to the equipment and or loss of data.
Attention est un message préventif indiquant qu'une procédure ou condition présente un risque
potentiel de dommages permanents pour l'équipement et/ou de perte de données.
A Note is useful information to prevent problems, help with successful installation, or to provide additional
understanding of the products and installation.
Une Remarque est une information utile permettant d'éviter certains problèmes, d'effectuer une
installation correcte ou de mieux comprendre les produits et l'installation.
A Tip is information and best practices that are useful or provide some benefit for installation and use of
FLIR products.
Un Conseil correspond à une information et aux bonnes pratiques utiles ou apportant un avantage
supplémentaire pour l'installation et l'utilisation des produits FLIR.

This document does not contain any export-controlled information.
Document Scope and Purpose
3
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
General Cautions and Warnings
This section contains information that indicates a
procedure or condition where there are potential hazards.
SAVE ALL SAFETY AND OPERATING INSTRUCTIONS
FOR FUTURE USE.
Although the unit is designed and manufactured in
compliance with all applicable safety standards, certain
hazards are present during the installation of this
equipment.
To help ensure safety and to help reduce risk of injury or
damage, observe the following:
Précautions et avertissements
d'ordre général
Cette section contient des informations
indiquant qu'une procédure ou condition
présente des risques potentiels.
CONSERVEZ TOUTES LES
INSTRUCTIONS DE SÉCURITÉ ET
D'UTILISATION POUR POUVOIR VOUS Y
RÉFÉRER ULTÉRIEUREMENT.
Bien que l'unité soit conçue et fabriquée
conformément à toutes les normes de
sécurité en vigueur, l'installation de cet
équipement présente certains risques.
Afin de garantir la sécurité et de réduire les
risques de blessure ou de dommages,
veuillez respecter les consignes suivantes:
Warning:
· The unit’s cover is an essential part of the product. Do not open or remove it.
· Never operate the unit without the cover in place. Operating the unit without the cover poses a risk
of fire and shock hazards.
· Do not disassemble the unit or remove screws. There are no user serviceable parts inside the
unit.
· Only qualified trained personnel should service and repair this equipment.
· Observe local codes and laws and ensure that installation and operation are in accordance with
fire, security and safety standards.
Avertissement:
· Le cache de l'unité est une partie essentielle du produit. Ne les ouvrez et ne les retirez pas.
· N'utilisez jamais l'unité sans que le cache soit en place. L'utilisation de l'unité sans cache
présente un risque d'incendie et de choc électrique.
· Ne démontez pas l'unité et ne retirez pas ses vis. Aucune pièce se trouvant à l'intérieur de
l'unité ne nécessite un entretien par l'utilisateur.
· Seul un technicien formé et qualifié est autorisé à entretenir et à réparer cet équipement.
· Respectez les codes et réglementations locaux, et assurez-vous que l'installation et l'utilisation
sont conformes aux normes contre l'incendie et de sécurité.

This document does not contain any export-controlled information.
Document Scope and Purpose
4
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
Warning:
· Do not drop the camera or subject it to physical shock.
· Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit
of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put
on the lens cap to protect the sensor from dirt.
· Do not aim the camera lens at strong light, such as the sun or an incandescent lamp, which can
seriously damage the camera.
· Make sure that the surface of the sensor is not exposed to a laser beam, which could burn out
the sensor.
· If the camera will be fixed to a ceiling, verify that the ceiling can support more than 23 newtons
(23-N) of gravity, or over three times the camera’s weight.
· The camera should be packed in its original packing if it is reshipped.
Caution:
To avoid damage from overheating or unit failure, assure that there is sufficient temperature regulation to
support the unit’s requirements (cooling/heating). Operating temperature should be kept within the range
indicated in the Technical Specifications section.
Attention:
Afin d'éviter tout dommage dû à une surchauffe ou toute panne de l'unité, assurez-vous que la
régulation de température est suffisante pour répondre aux exigences de l'unité
(refroidissement/chauffage). La température de fonctionnement doit être maintenue dans l'intervalle
indiqué dans la section Spécifications Techniques.

This document does not contain any export-controlled information.
Installation
5
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
2 Installation
The CP-6302-31-P PTZ and CP-6302-31-I IR PTZ cameras are designed for outdoor installation.
For outdoor installation, FLIR recommends:
· Always use weatherproof equipment, such as boxes, receptacles, connectors, etc.
· For electrical wiring, use the properly rated sheathed cables for conditions to which the cable will be
exposed (for example, moisture, heat, UV, physical requirements, etc.).
· Plan ahead to determine where to install infrastructure weatherproof equipment. Whenever possible,
ground components to an outdoor ground.
· Use best security practices to design and maintain secured camera access, communications
infrastructure, tamper-proof outdoor boxes, etc.
· All electrical work must be performed in accordance with local regulatory requirements.
Note: The CP-6302-30-R Recessed model will normally be installed indoors. Normal installation standards
should be applied.
Related Documents
· Quasar Gen III CP-6302 Range User Guide
· Quasar Gen III CP-6302 Quick Installation Guide (for the relevant model)
2.1 Waterproofing the Camera Cables
The cameras are IP66-rated to prevent water from entering the camera. Nevertheless, water can enter the
camera if it is not installed properly. Please make sure the warnings below are strictly followed when
installing the camera.
1. Place all cables and the adaptor in dry and well-waterproofed environments, e.g. waterproof boxes. This
prevents moisture accumulation inside the camera and moisture penetration into cables.
2. Seal the cable entry hole of
the pendant cap with the
rubber O-ring (supplied with
the camera) and use thread
seal tape to keep water from
entering the camera.
Waterproofing the Pendant Cap
3. While running cables, slightly
bend the cables in a U-shaped
curve to create a low point.
This prevents water from
entering the camera along the
cables from above.
U-Shaped Cable Installation

This document does not contain any export-controlled information.
Installation
6
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
2.2 Mounting the Camera
The following accessories and adapters are available for mounting the camera:
· Wall Mount Bracket CX-ARMX-G3
· Wall Mount Bracket with Power Box CX-ELBX-G3
· Gooseneck Mount with Power Box CX-GSNK-G3
· Corner Adapter CX-CRNR-G3
· Pole Adapter CX-POLE-G3
For the CP-6302-30-R PTZ recessed model, see In-Ceiling Mount.
2.2.1 Wall Mount Bracket CX-ARMX-G3
Wall mount bracket (1.5 inch threaded).
Item
Details
Qty
Wall mount bracket
CX-ARMX-G3
1
Parts package
No. 3 Allen key
1
Sponge
2
Quick install guide
Summarized below
1
Step 1
Place the smaller, green sponge
inside the bracket and route the
cables through the center of it, as
shown. You might need to cut a
slit in the sponge.
Step 2
Place the larger, black sponge
inside the bracket, as shown.
Route the cables through the pre-
cut cross in the sponge.
Step 3
Route the cables through the
bracket.

This document does not contain any export-controlled information.
Installation
7
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
Step 4
Affix the bracket to the wall using
the appropriate screws and screw
anchors (not provided).
Step 5
Use the Allen key and a hex head
cap screw to assemble and firmly
affix the camera's pendant cap to
the bracket.
CX-ARMX-G3 dimensions

This document does not contain any export-controlled information.
Installation
8
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
2.2.2 Wall Mount Bracket with Power Box CX-ELBX-G3
What's in the Box
Item
Details
Qty
Wall mount bracket with power
box
CX-ELBX-G3
1
Parts package
NO. 3 Allen Key
1
NO. 5 Allen Key
1
Sponge
1
Hex Head Cap screw
M6 x 20 (stainless steel)
2
Cable gland
1
Quick Install Guide
(this document)
1
Step 1
Place the sponge inside the
bracket and route the cables
through the center of it, as
shown. You might need to cut a
slit in the sponge.
Step 2
Route the cables through the
bracket.
Step 3
Follow camera instructions to
assemble the pendant cap.
Use the Allen key and a hex head
cap screw to assemble and firmly
affix the camera's pendant cap to
the bracket.
Step 4
Affix the power box to the wall or
to the column.
Step 5
Attach the bracket to the power
box.
Step 6
Buckle up the safety rope, make
the camera connections, tighten
the two hex screws to seal the
box, and then complete assembly.

This document does not contain any export-controlled information.
Installation
9
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
2.2.3 Gooseneck Mount with Power Box CX-GSNK-G3
Gooseneck mount (1.5 inch threaded) with IP68 power box.
Item
Details
Qty
Gooseneck bracket and
power box
CX-GSNK-G3 box
1
CX-GSNK-G3
gooseneck pipe
1
Accessory box
No. 2 Allen key
1
No. 3 Allen key
1
No. 5 Allen key
1
No. 6 Allen key
1
M4x8 hex cap
double washer
2
Quick install guide
Summarized below
1
Step 1
Fix backplate on mounting
surface.
Step 2
Assemble power box and tighten
screws with No. 6 Allen key.
Step 3
Assemble gooseneck pipe on
backplate and power box.
Step 4
Attach pendant cap to gooseneck
pipe, complete cable connections,
and connect camera to pendant
cap.
Step 5
Rotate gooseneck pipe to the
position required. Tighten
hexagon nuts to the flange and
use No. 3 Allen key to tighten
M4x8 hex socket screws.
Step 6
Use No. 6 Allen key to fix cover
screws.

This document does not contain any export-controlled information.
Installation
10
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
CX-GSNK-G3 dimensions
2.2.4 Mount Adapters
The following mount adapters are available for the camera:
· Corner Adapter CX-CRNR-G3
· Pole Adapter CX-POLE-G3
2.2.4.1 Corner Adapter CX-CRNR-G3
90-degree exterior angle corner adapter for CX-xxxx-G3 mounts.
Item
Details
Qty
Corner mount adapter
CX-CRNR-G3
1
Accessory bag
Stainless steel truss head screw
M8*25
4
Stainless steel truss head screw
M8*30
4
M8 washer
6
M8 screw nut
6
M8 spring washer
6
Quick install guide
Summarized below
1
Part 1
Part 2

This document does not contain any export-controlled information.
Installation
11
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
Step 1
Join parts 1 and 2 together.
Step 2
Tighten hex head cap screws
(clockwise).
Step 3
Fix assembled corner adapter to
the wall.
Step 4
· When using a wall mount bracket (pictured), affix the wall mount bracket onto the corner adapter with
washers in the front and screw nuts at the back.
· When using a power box, affix the power box onto the corner adapter.
CX-CRNR-G3 dimensions

This document does not contain any export-controlled information.
Installation
12
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
2.2.4.2 Pole Adapter CX-POLE-G3
Pole adapter for CX-xxxx-G3 mounts, including 2.5-8.5 inch straps.
Item
Details
Qty
Pole mount adapter
CX-POLE-G3
1
8.5" ring
3
Accessory bag
Stainless streel truss
head screw M8*20
4
Stainless steel truss
head screw M8*30
4
M8 washer
4
M8 screw nut
4
M8 spring washer
4
Quick install guide
Summarized below
1
Step 1
· When using a wall mount
bracket, affix the wall mount
bracket onto the pole adapter.
· When using a power box,
screw power box onto the
pole adapter.
Step 2
Thread the hoops through the
CX-POLE-G3.
Step 3
Fasten hoops tightly with flat-
head screwdriver.
CX-POLE-G3 dimensions
2.2.5 In-Ceiling Mount
The items and tools for in-ceiling installation are listed as follows.
Items Needed:
· CP-6302-30-R Network PTZ Camera
· Power Cable (necessary if PSE is not available)
· Ethernet Cable

This document does not contain any export-controlled information.
Installation
13
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
Tools Needed:
· Circle Cutter
· Crosshead Screw Driver (Thread size: M4)
Follow the steps to install CP-6302-30-R Network PTZ Camera
Step 1:
Make a 192mm cut in the ceiling.
Step 2:
Remove the dome cover by turning the dome cover counter-clockwise.
Step 3:
Put the Ethernet cable through the ceiling opening. Connect the Ethernet cable to the camera.
For the power, alarm & audio I/O connectors, please refer to the Connectors section in the User Guide for
further details.
Align and position the camera in the ceiling opening.
Step 4:
Fix the PTZ camera by fastening the three screws clockwise.

This document does not contain any export-controlled information.
Installation
14
Quasar CP-6302 Range Installation Manual - Ver. 3 - June 25, 2020
When tightening the three screws, the ceiling clamps will close towards the ceiling board. Please make
sure the clamp is completely flush with the ceiling board.
Step 5:
Put back and tighten the dome cover back clockwise to complete the installation.

This document does not contain any export-controlled information.
FLIR Systems, Inc.
6769 Hollister Ave
Goleta, CA 93117
USA
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
Support:
https://www.flir.com/support/
[e-mail]
Document:
Quasar Gen III CP-6302 Range Installation Manual
Version: Ver. 3
Date: June 25, 2020