FLIR DPB74TLUX User manual

Digital Video Security Systems
www.digimerge.com
Copyright © 2013 Digimerge Technologies Inc., a FLIR Company
Instruction Manual
English Version 2.0
D3200/D3300 Series
Digital Video Surveillance Recorder
4/8/16/32 960H Real-time View & Record CMS Mobile Apps HDMI
www.flir.com/security
formerly
DPB74TLUX
960H IR Bullet Camera
Instruction Manual
English Version 1.0
www.digimerge.com
www.flir.com/security

- 2 -

- 3 -

- 3 -
Contents
Contents .............................................................................. 3
General Features ................................................................. 4
Precautions .......................................................................... 5
Safety precautions ..................................................................................... 6
Please handle this camera carefully.......................................................... 6
Safety Instructions.............................................................. 6
Package Contents................................................................ 7
Installation........................................................................... 8
Connection ........................................................................ 10
How to Set Up the Camera Menu.................................... 11
Menu Tree................................................................................................. 12
Menu Tree (Continued)............................................................................ 13
Menu Tree................................................................................................. 14
Default Settings ....................................................................................... 15
Lens ........................................................................................................... 17
Exposure ................................................................................................... 17
White Balance .......................................................................................... 20
Day&Night ................................................................................................ 22
3DNR (3D-Digital Noise Reduction) ........................................................ 23
Special....................................................................................................... 24
Adjust........................................................................................................ 30
Reset ......................................................................................................... 31
Exit ............................................................................................................ 31
Dimensions ............................................................................................... 32
Specifications .................................................................... 32
Troubleshooting................................................................ 33

- 4 -
General Features
•1/3” Sony EX-View™ II 960H
•UL standard 60065 Approved
•Built-in video balun (UTP)
•Up-the-coax (UTC) OSD adjustment via remote controller*
•Polaris Vision2 low light viewing
•Smart-IR Night Vision (150ft/46m) with Adjustable LED Power Level
•3.5-16mm Auto Iris D/N Varifocal Lens
•True Day Night with ICR mechanism (TDN)
•IP67 Weatherproof rated
•Advanced 3D Digital Noise Reduction (3D-DNR)
•ArcticPro technology for harsh climates (minimum operating temperature -40°F)
•Cold starter in -40 Degrees Fahrenheit
•Precise zoom/ focus adjustment, with included adjustment tool
•Privacy Masking / Motion Detection
•24V AC Operation
•Service Monitor Output (BNC)
•Cable through bracket design
* UTC controller accessory sold separately

- 5 -
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Do not expose the camera to rain
or spill liquids on it.
Do not install or use the camera in an
environment where the humidity is high.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera in environments
between -40°C and +50°C.
This is one of the most important parts
of the camera. Be careful not to leave
fingerprints on the lens cover.
If it gets wet, wipe dry immediately.
Liquids can contain minerals that corrode
the electronic components.
It can cause malfunctions to occur.
If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
NOTE
•If the camera is exposed
to spotlight or strong
lighting, smear or
blooming may occur.
•Please check that the
power satisfies the
requirements listed in
the Specifications before
connecting the camera.
Precautions

- 6 -
Safety Instructions
Safety precautions
Please handle this camera carefully
•This camera should be installed by qualified personnel only.
•There are no user serviceable parts inside. Do not disassemble the camera.
•Use an appropriate low voltage power cable to prevent fire or electrical
shock.
•Please ensure that your installation area can support the weight of the
camera.
•Do not use a strong or abrasive detergent when cleaning the camera.
•Do not expose the camera to direct sun.
•Do not install the camera in high humidity environments.
•Do not install the camera near cooling or heating devices.

- 7 -
Package Contents
Mounting Plate (x1)
Tapping Screw
4x25 (x4)
Hexagon Screw
Plate 5x10 (x4)
Test Video Cable (x1)
Zoom / Focus
Adjustment Tool (x1)
Allen Key (x1)
Instruction Manual (x1)
Camera (x1)
Accessories
•MNTB74J -
Junction box
mount.
•ACCUTC1 -
UTC Controller
Contact your distributor
for details.

- 8 -
Installation
Mounting plate
Tapping screw 4x25
Hexagon screw 5x10
a. b. c.
Mounting
screw holes
Mounting Plate
4. Adjust the position of the camera, as needed.
a. Loosen the ring on the camera base to rotate the base 360°.
b. Loosen the screw on the side of the camera stand to tilt the
camera 180°.
c. Loosen the screw underneath the camera stand to rotate the
camera around the stand 360°.
1. Use the mounting plate to drill holes for the
cable and mounting screws.
2. Place the flat side of the mounting plate
against the surface and attach it to the
surface using the tapping screws 4x25 (4x).
3. Run the cable through the surface. Connect
the cables. Attach the base of the camera to
the mounting plate using the hexagon screws
5x10 (4x).

- 9 -
5. Unscrew the service compartment cap to adjust the zoom/focus, LED level, and OSD.
If the service compartment cap is too tight, use the included allen key to loosen it.
•(Optional) Connect the included video test cable to the Video Test connector
to output the video to a BNC test monitor.
•To adjust the zoom / focus, loosen the middle Lock screw with a philipshead
screwdriver. Then turn the Zoom and Focus screws using the included zoom /
focus adjustment tool or with a small philipshead screwdriver.
•To adjust the power output to the IR LEDs, use a small philipshead screwdriver
to turn the LED Level screw left to decrease the output or right to increase the
output. It is recommended to fine tune the IR level during low light conditions to
determine the best setting.
NOTE: By default, the IR LEDs are set for maximum output. For short-range installation
environments, it is recommended to turn down the LED level.
•For details on adjusting the OSD menu, see “How to Set Up the Camera Menu”
on page 11.
NOTE: OSD menu can also be controlled using a UTC controller (Pelco C protocol;
accessory model number: ACCUTC1).
6. Close the service compartment cap and ensure all camera adjustment screws
are tightened securely. You can use the included allen key to secure the service
compartment cap.
Make sure the rubber seal is on the service compartment cap to ensure the
weatherproof rating of the camera.