flowair ELIS AX W-100 Guide

ELiS AX air curtain
Kurtyna powietrzna ELiS AX
ELIS AX W-100
ELIS AX W-150
ELIS AX W-200
ELIS AX W-250
Technical documentation·Instruction manual
Dokumentacja techniczna·Instrukcja użytkowania
Quiet EC fans High performance A wide range of heating power
Works discreetly for you
Ciche wentylatory EC Wysoka wydajność Szeroki zakres mocy grzewczych

2
TECHNICAL DOCUMENTATION EN ......3
1. IMPORTANT INFORMATION............................................................................................................................................... 3
2. GENERAL INFORMATION.................................................................................................................................................... 4
3. TECHNICAL DATA ELIS AX ................................................................................................................................................... 4
4. DIMENSIONS ...................................................................................................................................................................... 5
5. INSTALLATION.................................................................................................................................................................... 5
6. HORIZONTAL INSTALLATION .............................................................................................................................................. 6
7. CONNECTION OF ELECTRICAL INSTALALTION ..................................................................................................................... 7
8. CONNECTION OF COMPONENTS ........................................................................................................................................ 9
9. CONNECTION OF HYDRAULIC INSTALLATION ................................................................................................................... 12
10. PARAMETERS OF THE HEATING MEDIUM......................................................................................................................... 13
11. OPERATION...................................................................................................................................................................... 13
12. CLEANING AND MAINTENANCE........................................................................................................................................ 13
13. CONFORMITY WITH WEEE DIRECTIVE 2012/19/UE .......................................................................................................... 14
14. SERVICE AND WARRANTY TERMS .................................................................................................................................... 14
DOKUMENTACJA TECHNICZNA PL .....15
1. WAŻNE INFORMACJE ....................................................................................................................................................... 15
2. INFORMACJE OGÓLNE...................................................................................................................................................... 16
3. DANE TECHNICZNE KURTYN ELIS AX................................................................................................................................. 16
4. WYMIARY ........................................................................................................................................................................ 17
5. MONTAŻ .......................................................................................................................................................................... 17
6. MONTAŻ POZIOMY .......................................................................................................................................................... 18
7. PODŁĄCZENIE INSTALACJI ELEKTRYCZNEJ......................................................................................................................... 19
8. PODŁĄCZENIE KOMPONENTÓW....................................................................................................................................... 21
9. PODŁĄCZENIE INSTALACJI HYDRAULICZNEJ...................................................................................................................... 24
10. PARAMETRY CZYNNIKA GRZEWCZEGO............................................................................................................................. 25
11. EKSPLOATACJA................................................................................................................................................................. 25
12. CZYSZCZENIE I KONSERWACJA ......................................................................................................................................... 25
13. ZGODNOŚĆ Z DYREKTYWĄ WEEE 2012/19/UE ................................................................................................................. 26
14. WARUNKI SERWISU I GWARANCJI ................................................................................................................................... 26

3
TECHNICAL DOCUMENTATION EN
1. IMPORTANT INFORMATION
We have made every effort to make this manual aseasy to understand as possible. However, if youhave any difficulties, problems or questions,
please contact FLOWAIR support at: [email protected].
Also visit our website www.flowair.pl where you will find mounting tips.
In this manual you will find important safety information and tips marked as below:
WARNING
Dangerous practices which may result in
serious injury or death. Read all warnings
before starting work.
CAUTION
Unsafe practices which, if not avoided, may
result in damage to property or minor
injuries. Before starting work, read all
cautions.
ADVICE
Useful tips for the user and
installer.
IMPORTANT SAFETY INFORMATION:
ADVICE
1. Before installing, connecting, starting up, using and maintaining the device, please read this manual
completely.
2. After receiving the product, check that it has not been damaged during transport. If the product appears
to be damaged, DO NOT START TO MOUNT THE DEVICE; instead, you must immediately report the
damage to the delivery man.
3. The device must be mounted in a stable way and in accordance with the instructions, in a place that can
be easily accessed, thus ensuring the possibility of carrying out repairs and routine maintenance, as well
as allowing easy and safe disassembly of the device.
4. The stability and durability of installation of the device depends on the structure of the building (in
particular walls and ceilings). The person performing the assembly should take these conditions into
account when mounting the device.
5. The technical documentation should be kept in a safe place, easily accessible to the user and service
technician.
6. Always test the operation of the device after installation.
CAUTION
1. The power connection shall be performed only by an authorized person.
2. The device is not equipped with a thermostat that controls the room temperature. Do not use the device
in small rooms where there are people who are not able to leave the premises alone. Above mentioned
does not apply to rooms with constant supervision.
3. The device requires periodic inspections in accordance with the instructions in this manual.
4. Do not hang/put pressure on the device.
5. Do not place any objects on the device or hang anything on the connection stubs.
6. The product should be stored and assembled out of the reach of small children.
7. The device is dedicated to work indoors with a maximum air dustiness of 0.3 g/m3. The device has
elements made of aluminum, copper and galvanized steel and cannot be used in an corrosive
environment.
8. Equipment cannot be used in an environment where oil mist is present.
9. This equipment may be used by children that are at least 8 years old, by persons with reduced physical
and mental abilities and persons with no experience and knowledge of the equipment, on condition that
the supervision or instruction regarding correct use of the equipment in a safe manner is provided and
the possible threats are understood. The device cannot be used by children to play. Unattended children
should not clean or maintain the equipment.
WARNING
1. The device is powered by dangerous voltage. Always disconnect the device from the power supply
before servicing or accessing its internal components.
2. Do not insert your fingers or any objects inside the device.
3. Do not cover the device.

4
2. GENERAL INFORMATION
ELiS AX air curtain is a high-quality device that, by creating an air barrier, reduces heat losses. The device is dedicated ONLY for indoor use.
The ELiS AX air curtain is intended for horizontal installation above a door opening or vertical installation with a door opening with a
maximum height of 4,5 m.
The air curtain is available in a version with a water 3-row or 4-row heat exchanger:
•ELiS AX36-W3R-100, ELiS AX36-W3R-150, ELiS AX36-W3R-200, ELiS AX36-W3R-250 – air curtains with 3-row water heat exchanger
with a maximum range of 3,6 m*,
•ELiS AX36-W4R-100, ELiS AX36-W4R-150, ELiS AX36-W4R-200, ELiS AX36-W4R-250 – air curtains with 4-row water heat exchanger
with a maximum range of 3,6 m*,
•ELiS AX45-W3R-100, ELiS AX45-W3R-150, ELiS AX45-W3R-200, ELiS AX45-W3R-250 – air curtains with 3-row water heat exchanger
with a maximum range of 4,5 m*,
•ELiS AX45-W4R-100, ELiS AX45-W4R-150, ELiS AX45-W4R-200, ELiS AX45-W4R-250 – air curtains with 4-row water heat exchanger
with a maximum range of 4,5 m*.
* according to ISO 27327-1
❶
ADVICE
1. The use of an air curtain is recommended for public buildings .
2. Underpressure in the building significantly reduces the efficiency of the air barrier, the ventilation system should be
balanced.
3. At a wind speed of more than 3 m/s, the heated version of air curtain should be used to increase user comfort.
3. TECHNICAL DATA ELIS AX
ELiS AX36-
W3R-100
ELiS AX36-
W3R-150
ELiS AX36-
W3R-200
ELiS AX36-
W3R-250
ELiS AX36-
W4R-100
ELiS AX36-
W4R-150
ELiS AX36-
W4R-200
ELiS AX36-
W4R-250
Power supply [V/Hz] 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50
Max. current consumption [A] 2,3 3,3 5,6 6,4 2,2 3,2 5,5 6,3
Power consumption [kW] 0,27 0,40 0,67 0,81 0,27 0,40 0,67 0,81
IP 21
Connection stub [''] 3/4
Air volume(1) [m3/h] 900 - 1800 1200-2700 2000-4300 2300-5300 800-1700 1100-2600 1900-4200 2200-5200
Acoustic pressure level(2) [dB(A)] 42-60 43-61 45-63 46-64 41-59 42-60 44-62 45-63
Acoustic power level(3) [dB(A)] 58-76 59-77 61-79 62-80 57-75 58-76 60-78 61-79
Heating power (4) [kW] 8,1-12,9 11,8-20,5 17,1-29,0 21,4-38,0 8,7-15,2 12,7-24,1 20,6-36,7 24,7-46,6
Temperature increase (4) (ΔT ) [°C] 26-21 29-22 25-20 27-21 32-26 34-27 31-26 33-26
Max. Water pressure [MPa] 1,6
Max. water temperature [˚C] 60
Device mass [kg] 38,5 53,3 71,7 86,8 40,0 55,6 74,8 90,3
Range(1) [m] 3,6
4,5 m
3,6 m
PIC. 2.1 ELIS AX45 RANGE.
PIC. 2.2 ELIS AX36 RANGE.
PIC. 2.3 DIRECTION OF AIR FLOW.
❶INLET ❷OUTLET

5
(1) According to ISO 27327-1;
(2) Acoustic pressure level has been measured in a 1500m3space with a medium sound absorption coefficient, directional factor: Q=2;
(3) Acoustic power level according to ISO 27327-2;
(4) Power and temperature range specified for the parameters: min. capacity, heating medium temperature 60/40°C temperature at the inlet to the device 18°C - max. efficiency,
heating medium temperature 60/40°C temperature at the inlet to the device 18°C;
4. DIMENSIONS
5. INSTALLATION
Air curtains must be installed as close as possible to the door opening and cover:
•the entire width (applies to horizontal installation),
•full height (applies to vertical mounting).
CORRECT
WRONG
CORRECT
WRONG
ELiS AX45-
W3R-100
ELiS AX45-
W3R-150
ELiS AX45-
W3R-200
ELiS AX45-
W3R-250
ELiS AX45-
W4R-100
ELiS AX45-
W4R-150
ELiS AX45-
W4R-200
ELiS AX45-
W4R-250
Power supply [V/Hz] 230/50 230/50 230/50 230/50 230/50 230/50 230/50 230/50
Max. current consumption [A] 3,3 4,6 6,4 7,6 3,2 4,5 6,3 7,5
Power consumption [kW] 0,49 0,65 0,99 1,15 0,49 0,65 0,99 1,15
IP 21
Connection stub [''] 3/4
Air volume(1) [m3/h] 1100-2500 1500-3500 2200-5000 2400-6100 1000-2400 1400-3400 2100-4900 2300-6000
Acoustic pressure level(2) [dB(A)] 43-61 44-62 45-64 46-65 42-60 43-61 44-63 45-64
Acoustic power level(3) [dB(A)] 59-77 60-78 61-80 62-81 58-76 59-77 60-79 61-80
Heating power (4) [kW] 9,3-15,7 13,9-24,1 18,4-31,8 22,1-41,4 10,3-19,1 15,3-28,9 22,2-40,6 25,6-51,3
Temperature increase (4) (ΔT ) [°C] 25-18 27-20 24-19 27-20 30-23 32-25 31-24 33-25
Max. water pressure [MPa] 1,6
Max. water temperature [˚C] 60
Device mass [kg] 40,8 55,5 73,7 88,8 42,3 57,8 76,8 92,3
Range(1) [m] 4,5
PIC. 4.1 BASIC DIMENSIONS.
PIC. 5.1 HORIZONTAL INSTALLATION.
PIC. 5.2 VERTICAL INSTALLATION.

6
6. HORIZONTAL INSTALLATION
ELiS AX curtains are adapted for horizontal installation with the use of dedicated brackets or M8 threaded rods (maximum length of the
rods 1m). During assembly, keep the minimum distances as shown in the figure below. The device must be leveled before it is put into
operation.
min. 200 mm
PIC. 6.1 MOUNTING WITH DEDICATED BRACKETS.
PIC. 6.2 BRACKETS DISTANCE ELIS AX W 100.
PIC. 6.3 BRACKETS DISTANCE ELIS AX W 150.
PIC. 6.4 BRACKETS DISTANCE ELIS AX W 200.
PIC. 6.5 BRACKETS DISTANCE ELIS AX W 250.
PIC. 6.6 INSTALLATION WITH THREADED RODS
ELIS AX 100/150/200.
PIC. 6.7 INSTALLATION WITH THREADED RODS
ELIS AX 250.

7
7. CONNECTION OF ELECTRICAL INSTALALTION
•Remove screws from down and above as in the picture PIC. 7.1.
•Use imbus 3.0mm key to remove the screws.
•Depending on the length of the device, the number of screws varies (see the table).
Model Number of bolts from above Number of bolts from below
ELIS AX 100
1
3
ELIS AX 150
2
4
ELIS AX 200
2
5
ELIS AX 250
3
6
•
To remove the cover, tilt it (1) and slide it out of the catches (2) as shown in the graphic PIC. 7.2.
1
2
2
PIC. 7.1 SCREW POSITIONS.
PIC. 7.2 REMOVING THE COVER.

8
•
Unscrew the screws inside the device to be able to open the inspection
hatch.
•Depending on the length of the device, the number of screws varies (see
the table)
Model
Number of screws to unscrew
inside
ELIS AX 100
3
ELIS AX 150
5
ELIS AX 200
5
ELIS AX 250
7
CAUTION
Hold the hatch while unscrewing to prevent it from opening suddenly.
Power supply conection position
Transformer position (optional)
Position of the DRV ELIS AX in the curtain
WARNING
1. The power connection should be made in accordance with the technical documentation. The device
installation should always be carried out in accordance with applicable local safety standards.
2. The cross-section and type of cable should be selected by the designer. (Always make sure that the
disconnectors and protective switches are properly sized and disconnect all poles of the power supply).
3. Make sure that the connection of power supply and controllers to the ELiS AX curtain is made in accordance
with the electrical specifications and the instructions included in the connection diagrams in the technical
documentation.
4. Before connecting the power supply, check that the mains voltage corresponds to the voltage on the
device's type plate.
5. Check the power connection before connecting the air curtain.
6. Starting the device without connecting the grounding wire is not allowed.
7. Protect the power cord against pulling out by clamping the cable gland.
8. Tighten all connection cables in the block properly
9. Do not start the device with the service hatch open.
PIC. 7.3 RELEASING THE INSPECTION HATCH.
PIC. 7.4 VIEW OF CONNECTIONS AND DRV ELIS AX INSIDE THE INSPECTION HATCH

9
8. CONNECTION OF COMPONENTS
Conductor cross-section:
•min. 3x1,5 mm2
•Protection B10
Conductor cross-section:
•min. 2x0,5 mm2
PIC. 8.1 GENERAL APPEARANCE OF THE DRV ELIX AX.
PIC. 8.2 POWER SUPPLY.
PIC. 8.3 CONNECTING OF THE DOOR SENSOR.

10
Conductor cross-section:
•2x0,5mm2
Conductor cross-section:
•LIYY-P min. 2x2x0,5mm2
PIC. 8.4 CONNECTION OF PT-1000 SENSORS.
PIC. 8.5 T-BOX ZONE CONNECTION.