Fluke 1594A Quick start guide

1594A/1595A
Super-Thermometer
Technical Guide
159X____tgeng0000

Fluke Corporation
799 E. Utah Valley Drive • American Fork, UT 84003-9775 • USA
Phone: [phone] • Telefax: +1.801.763.1010
E-mail: support@hartscientic.com
www.hartscientific.com
Specications subject to change without notice. • Copyright © 2008 • Printed in USA
Limited Warranty & Limitation of Liability
Each product from Fluke Corporation (“Fluke”) is warranted to be free from defects in material and work-
manship under normal use and service. The warranty period is one year(s) for the thermometer. The warranty
period begins on the date of the shipment. Parts, product repairs, and services are warranted for 90 days. The
warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does
not apply to fuses, disposable batteries or to any other product, which in Fluke’s opinion, has been misused,
altered, neglected, or damaged by accident or abnormal conditions of operation or handling. Fluke warrants
that software will operate substantially in accordance with its functional specications for 90 days and that it
has been properly recorded on non-defective media. Fluke does not warrant that software will be error free or
operate without interruption. Fluke does not warrant calibrations on the Super-Thermometer.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only
but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is avail-
able if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable interna-
tional price. Fluke reserves the right to invoice Buyer for importation costs of repairs/replacement parts when
product purchased in one country is submitted for repair in another country.
Fluke’s warranty obligation is limited, at Fluke’s option, to refund of the purchase price, free of charge repair,
or replacement of a defective product which is returned to a Fluke authorized service center within the war-
ranty period.
To obtain warranty service, contact your nearest Fluke authorized service center or send the product, with a
description of the difculty, postage, and insurance prepaid (FOB Destination), to the nearest Fluke authorized
service center. Fluke assumes no risk for damage in transit. Following warranty repair, the product will be
returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that the failure was caused
by misuse, alteration, accident or abnormal condition or operation or handling, Fluke will provide an estimate
or repair costs and obtain authorization before commencing the work. Following repair, the product will be
returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transporta-
tion charges (FOB Shipping Point).
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRAN-
TIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL. OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF

iii
Table of Contents
1 Before You Start .................................................................................... 1
1.1 Symbols Used............................................................................................................1
1.2 Safety Information......................................................................................................1
1.2.1 WARNINGS .......................................................................................................................1
1.2.2 CAUTIONS ........................................................................................................................2
1.3 Authorized Service Centers.......................................................................................2
2 Introduction and Specications .......................................................... 5
2.1 Introduction................................................................................................................5
2.2 Specifications ............................................................................................................5
2.2.1 General..............................................................................................................................5
2.2.2 Primary Specifications.......................................................................................................6
2.2.2.1 Resistance Ratio Accuracy.......................................................................................................6
2.2.2.2 Resistor Stability .......................................................................................................................6
2.2.2.3 Absolute Resistance Accuracy.................................................................................................7
2.2.2.4 Measurement Current Accuracy...............................................................................................7
2.2.3 Ancillary Specifications.....................................................................................................8
2.2.3.1 Temperature Measurement Noise.............................................................................................8
2.2.3.2 Relative Measurement Current Accuracy.................................................................................8
2.2.4 General Specifications ......................................................................................................9
2.2.5 Applying the Specifications ..............................................................................................9
2.2.5.1 Introduction...............................................................................................................................9
2.2.5.2 How the Super-Thermometer Measures...................................................................................9
2.2.5.3 Example 1: Measuring an SPRT .............................................................................................10
2.2.5.4 Example 2: Calibrating an SPRT.............................................................................................12
2.2.5.5 Example 4: Measuring a 100 Ω PRT.......................................................................................13
2.2.5.6 Example 5: Measuring a 10 kΩ Thermistor ............................................................................14
3 Preparation for Operation................................................................... 15
3.1 Unpacking and Inspection ......................................................................................15
3.2 Instruction Manuals..................................................................................................15
3.3 Line Voltage and Fuses ...........................................................................................15
3.4 Connecting to Line Power........................................................................................16
3.5 Placement and Rack Mounting................................................................................16
4 Front and Rear Panel Features .......................................................... 17
4.1 Introduction..............................................................................................................17
4.2 Front Panel Features................................................................................................17
4.2.1 Measurement Inputs .......................................................................................................17
4.2.2 USB Connection..............................................................................................................17
4.2.3 Front Panel Keys .............................................................................................................18
4.2.3.1 Front Panel Display.................................................................................................................19
4.3 Rear Panel Features ................................................................................................20
4.3.3.1 External Resistor Inputs..........................................................................................................20
4.3.1 Scanner Connection........................................................................................................20
4.3.2 Future Peripheral Connection .........................................................................................21
4.3.3 Remote Operation Connections......................................................................................21
4.3.4 Line Voltage Connection .................................................................................................22

1594A/1595A Super-Thermometer
iv
4.3.5 Earth Ground Connection ...............................................................................................22
5 Menus and Screens ............................................................................ 23
5.1 Introduction..............................................................................................................23
5.2 Changing Settings ...................................................................................................23
5.3 Password Protection ................................................................................................24
5.4 Menu Navigation......................................................................................................24
5.5 Menu System ...........................................................................................................24
5.6 Measurement Screen...............................................................................................25
5.6.1 Channel Measurement Display .......................................................................................26
5.6.2 Channel Summary Section..............................................................................................26
5.6.3 Statistics Fields ...............................................................................................................27
5.6.4 Data/Graph Section.........................................................................................................27
5.6.5 Status and Alert Section..................................................................................................27
5.6.6 START/STOP MEASUREMENT (F1) ................................................................................28
5.6.7 SHOW TABLE/GRAPH (F2) .............................................................................................28
5.6.8 RESET STATISTICS (F3) ..................................................................................................28
5.6.9 CLEAR GRAPH/CLEAR MESSAGE (F4) .........................................................................28
5.6.10 START/STOP RECORD (F5) ...........................................................................................28
5.7 Main Menu ...............................................................................................................28
5.7.1 CHANNEL SETUP (F1)....................................................................................................29
5.7.1.1 ASSIGN PROBE (F1) ..............................................................................................................29
5.7.1.2 CHANNEL SETTINGS (F2)......................................................................................................30
5.7.2 PROBE MENU (F2)..........................................................................................................34
5.7.2.1 ADD PROBE (F1) ...................................................................................................................34
5.7.2.2 COPY PROBE (F2)..................................................................................................................36
5.7.2.3 EDIT PROBE (F3)....................................................................................................................36
5.7.2.4 READ PROBE (F4) ..................................................................................................................37
5.7.2.5 MANAGE PROBES (F5) .........................................................................................................37
5.7.3 MEASURE MENU (F3).....................................................................................................38
5.7.3.1 SCAN SETTINGS (F1).............................................................................................................39
5.7.3.2 TIMING SETTINGS (F2) ..........................................................................................................39
5.7.3.3 DIGITAL FILTER (F3)...............................................................................................................41
5.7.3.4 RECORDING MENU (F4)........................................................................................................41
5.7.3.5 ZERO-POWER MEASUREMENT (F5) .....................................................................................43
5.7.4 DISPLAY MENU (F4) .......................................................................................................46
5.7.4.1 USER SETTINGS (F1) .............................................................................................................47
5.7.4.2 FIELD SETTINGS (F2) ............................................................................................................48
5.7.4.3 STATISTICS SETTINGS (F3)....................................................................................................49
5.7.4.4 GRAPH SETTINGS (F4) ..........................................................................................................49
5.7.4.5 TEMPERATURE UNIT (F5) ......................................................................................................50
5.7.5 SYSTEM MENU (F5)........................................................................................................50
5.7.5.1 TIME DATE (F1) ......................................................................................................................50
5.7.5.2 REMOTE INTERFACE (F2)......................................................................................................51
5.7.5.3 CONFIG (F3)...........................................................................................................................52
5.7.6 RECALL CONFIG (F2).....................................................................................................53
5.7.7 DELETE CONFIG (F3).....................................................................................................54
5.7.7.1 PASSWORD (F4).....................................................................................................................54
5.7.7.2 CALIBRATION (F5) .................................................................................................................55
6 Getting Started .................................................................................... 57
6.1 Powering on the Super-Thermometer......................................................................57

v
6.2 User Settings Screen...............................................................................................57
6.3 Connecting a Probe or Resistor...............................................................................58
7 Making Measurements ....................................................................... 61
7.1 Introduction..............................................................................................................61
7.2 Measuring a Temperature Probe .............................................................................61
7.3 Scanning Multiple Temperature Probes...................................................................62
7.4 Measuring Resistance Ratio....................................................................................62
7.5 Configuring an External Reference Resistor............................................................62
7.6 Making A Zero-Power Measurement .......................................................................63
8 Remote Operation............................................................................... 65
8.1 Introduction..............................................................................................................65
8.2 Configuring the Network (LAN) Port ........................................................................65
8.2.1 Hardware Mac Address ..................................................................................................66
8.2.2 Selecting Dynamic Host Configuration Protocol (DHCP)................................................66
8.2.3 Setting a Static Internet Protocol (IP) Address................................................................66
8.2.4 Setting the LAN Gateway Address .................................................................................67
8.2.5 Setting the LAN Subnet Mask .........................................................................................67
8.2.6 Setting the Host Name ....................................................................................................67
8.3 Using the Web Interface..........................................................................................68
8.4 Configuring the USB Port.........................................................................................68
8.5 Configuring the RS-232 Serial Port ..........................................................................69
8.6 Configuring the IEEE-488 Port.................................................................................69
8.7 Interface Commands ...............................................................................................70
8.7.1 Command Syntax............................................................................................................70
8.7.2 List of Commands ...........................................................................................................70
8.7.3 Descriptions of Commands.............................................................................................74
8.7.3.1 *CLS........................................................................................................................................74
8.7.3.2 *ESE <value>..........................................................................................................................74
8.7.3.3 *ESR?......................................................................................................................................74
8.7.3.4 *IDN? ......................................................................................................................................75
8.7.3.5 *RST........................................................................................................................................75
8.7.3.6 *SRE <value> .........................................................................................................................75
8.7.3.7 *STB? ......................................................................................................................................76
8.7.3.8 CAL:DATE <year>,<month>,<day>.......................................................................................76
8.7.3.9 CAL:PAR:LIN<n> <value> .....................................................................................................76
8.7.3.10 CAL:PAR:RES<n> <value> ....................................................................................................76
8.7.3.11 CAL:PAR:ZERO <value> ........................................................................................................76
8.7.3.12 CALC<n>:AVER:ALL? ............................................................................................................77
8.7.3.13 CALC<n>:AVER:AVER?..........................................................................................................77
8.7.3.14 CALC[<n>]:AVER:CLEA .........................................................................................................77
8.7.3.15 CALC:AVER:COUN <value> ..................................................................................................77
8.7.3.16 CALC<n>:AVER:MAX? ...........................................................................................................78
8.7.3.17 CALC<n>:AVER:MIN? ............................................................................................................78
8.7.3.18 CALC<n>:AVER:SDEV?..........................................................................................................78
8.7.3.19 CALC<n>:AVER:SEM? ...........................................................................................................79
8.7.3.20 CALC<n>:AVER:SPR? ............................................................................................................79
8.7.3.21 CALC<n>:AVER:SSIZ? ...........................................................................................................79
8.7.3.22 CALC:AVER:TCON NORM|MOV.............................................................................................79
8.7.3.23 CALC:DELT:CHAN <channel> ...............................................................................................79

1594A/1595A Super-Thermometer
vi
8.7.3.24 CALC<n>:DELT:DATA? ...........................................................................................................80
8.7.3.25 CALC:DELT:MODE OFFS|CHAN.............................................................................................80
8.7.3.26 CALC:DELT:OFFS <value>.....................................................................................................80
8.7.3.27 CALC<n>:TYPE TEMP|RES|RAT.............................................................................................80
8.7.3.28 DATA:REC:ALL <boolean>.....................................................................................................80
8.7.3.29 DATA:REC:FILE <name> ........................................................................................................81
8.7.3.30 DATA:REC:MEM INT|USB|BOTH.............................................................................................81
8.7.3.31 DATA:REC[:STAT] <boolean>.................................................................................................81
8.7.3.32 DISP:ALER:CLEA....................................................................................................................81
8.7.3.33 DISP:ALER[:READ]? ...............................................................................................................81
8.7.3.34 DISP:DATE:FORM YMD|DMY|MDY.........................................................................................81
8.7.3.35 DISP:DEC:FORM PER|COMM ................................................................................................81
8.7.3.36 DISP:FIEL:FEED<n>? ............................................................................................................81
8.7.3.37 DISP:FIEL:MEM <n> ..............................................................................................................82
8.7.3.38 DISP:FIEL:MEM<n1>:FEED<n2> <feed> .............................................................................82
8.7.3.39 DISP:HELP <boolean> ...........................................................................................................82
8.7.3.40 DISP:LANG ENGLISH|CHINESE|JAPANESE|SPANISH|GERMAN|FRENCH|RUSSIAN...........82
8.7.3.41 DISP:TEMP:DIG <digits>........................................................................................................82
8.7.3.42 DISP:WARN:DUE <boolean> .................................................................................................82
8.7.3.43 DISP:WARN:ITS <boolean> ...................................................................................................83
8.7.3.44 FETC? <channel>...................................................................................................................83
8.7.3.45 INIT:CONT <boolean>............................................................................................................83
8.7.3.46 INIT:STOP:BEEP <boolean>...................................................................................................83
8.7.3.47 INIT:STOP:DUR <value>.........................................................................................................83
8.7.3.48 INIT:STOP[:STAT] <boolean> .................................................................................................84
8.7.3.49 INIT:STOP:TIME?.....................................................................................................................84
8.7.3.50 INP<n>:CURR <current> .......................................................................................................84
8.7.3.51 INP<n>:CURR:DATA?.............................................................................................................84
8.7.3.52 INP<n>:CURR:STAN <boolean>............................................................................................84
8.7.3.53 INP:PROB:ADD <id>..............................................................................................................84
8.7.3.54 INP:PROB:COUN?..................................................................................................................85
8.7.3.55 INP:PROB:DEL <id>...............................................................................................................85
8.7.3.56 INP:PROB:FIRS?.....................................................................................................................85
8.7.3.57 INP<n>:PROB:IDEN <id> ......................................................................................................85
8.7.3.58 INP:PROB:NEXT?....................................................................................................................85
8.7.3.59 INP:PROB:PAR <id>,<name>,<value>..................................................................................86
8.7.3.60 INP:PROB:TEST? <id>,<resistance> .....................................................................................87
8.7.3.61 INP:REAR<n>:RS:IDEN <id>|VAR|NONE...............................................................................87
8.7.3.62 INP:RS:ADD <id> ...................................................................................................................88
8.7.3.63 INP:RS:COUN? .......................................................................................................................88
8.7.3.64 INP:RS:DEL <id>....................................................................................................................88
8.7.3.65 INP:RS:FIRS? ..........................................................................................................................88
8.7.3.66 INP<n>:RS:IDEN <id>|VAR|NONE .........................................................................................88
8.7.3.67 INP:RS:NEXT?.........................................................................................................................89
8.7.3.68 INP:RS:OVEN:STAB? ..............................................................................................................89
8.7.3.69 INP:RS:PAR <id>,<name>,<value>.......................................................................................89
8.7.3.70 INP<n>:RS:ROUT <source> ..................................................................................................89
8.7.3.71 ROUT:CLOS <channel> .........................................................................................................90
8.7.3.72 ROUT:CLOS:STAT? .................................................................................................................90
8.7.3.73 ROUT:SCAN <channel list>....................................................................................................90
8.7.3.74 ROUT:SCAN:ADD <channel list> ...........................................................................................91
8.7.3.75 ROUT:SCAN:ALT <boolean>..................................................................................................91
8.7.3.76 ROUT:SCAN:DEL <channel list>............................................................................................91
8.7.3.77 ROUT:SCAN:REF <channel>..................................................................................................91
8.7.3.78 ROUT:SCAN:REP <value>......................................................................................................91
8.7.3.79 ROUT:SCAN:STAT <boolean> ................................................................................................92

vii
8.7.3.80 SENS:APER[:DISP] <time>.....................................................................................................92
8.7.3.81 SENS:APER:PRES NORM|PREC|FAST|LONG ........................................................................92
8.7.3.82 SENS:APER:SAMP <time> .....................................................................................................92
8.7.3.83 SENS:AVER1[:STAT] <boolean>.............................................................................................92
8.7.3.84 SENS:AVER2[:STAT] <boolean>.............................................................................................93
8.7.3.85 SENS:AVER2:COUN <count> ................................................................................................93
8.7.3.86 SENS:AVER2:CLEA.................................................................................................................93
8.7.3.87 SENS[<n>][:FRES]:DATA?......................................................................................................93
8.7.3.88 SENS[<n>]:RRAT:DATA?.........................................................................................................93
8.7.3.89 STAT:OPER?............................................................................................................................94
8.7.3.90 STAT:OPER:COND? ................................................................................................................94
8.7.3.91 STAT:OPER:ENAB <value>.....................................................................................................94
8.7.3.92 STAT:QUES?............................................................................................................................94
8.7.3.93 STAT:QUES:COND? ................................................................................................................94
8.7.3.94 STAT:QUES:ENAB <value>.....................................................................................................94
8.7.3.95 SYST:BEEP[:IMM] ...................................................................................................................95
8.7.3.96 SYST:BEEP:KEY <boolean> ...................................................................................................95
8.7.3.97 SYST:BEEP:ALER <boolean>.................................................................................................95
8.7.3.98 SYST:CODE:VERS?.................................................................................................................95
8.7.3.99 SYST:COMM:GPIB:ADDR <value>.........................................................................................95
8.7.3.100 SYST:COMM:GPIB[:STAT] <boolean>....................................................................................95
8.7.3.101 SYST:COMM:GPIB:TERM LIN|RET .........................................................................................95
8.7.3.102 SYST:COMM:SER:BAUD <value> ..........................................................................................95
8.7.3.103 SYST:COMM:SER:LIN <boolean> ..........................................................................................95
8.7.3.104 SYST:COMM:SOCK:ADDR <IP address> ..............................................................................95
8.7.3.105 SYST:COMM:SOCK:CONT OFF|ON|QUER.............................................................................96
8.7.3.106 SYST:COMM:SOCK:DHCP <boolean>...................................................................................96
8.7.3.107 SYST:COMM:SOCK:GAT <IP address> .................................................................................96
8.7.3.108 SYST:COMM:SOCK:KEEP <seconds>...................................................................................96
8.7.3.109 SYST:COMM:SOCK:MAC?......................................................................................................97
8.7.3.110 SYST:COMM:SOCK:MASK <IP address> ..............................................................................97
8.7.3.111 SYST:COMM:SOCK:NAME <name> ......................................................................................97
8.7.3.112 SYST:COMM:USB[:STAT] <boolean> .....................................................................................97
8.7.3.113 SYST:CONF:CHAN?................................................................................................................97
8.7.3.114 SYST:CONF:SCAN? ................................................................................................................97
8.7.3.115 SYST:DATE <year>,<month>,<day>......................................................................................97
8.7.3.116 SYST:ERR?..............................................................................................................................98
8.7.3.117 SYST:KLOC <boolean> ..........................................................................................................98
8.7.3.118 SYST:PASS:CDIS.....................................................................................................................98
8.7.3.119 SYST:PASS:CEN <password> ................................................................................................98
8.7.3.120 SYST:PASS:CEN:STAT?...........................................................................................................99
8.7.3.121 SYST:PASS:GROU:MEAS <boolean>.....................................................................................99
8.7.3.122 SYST:PASS:GROU:PROB <boolean>.....................................................................................99
8.7.3.123 SYST:PASS:GROU:RES <boolean>........................................................................................99
8.7.3.124 SYST:PASS:GROU:TIME <boolean> ......................................................................................99
8.7.3.125 SYST:PASS:NEW <current password>,<new password> ......................................................99
8.7.3.126 SYST:PON:MIN?......................................................................................................................99
8.7.3.127 SYST:TIME <hour>,<minute>,<second> ...............................................................................99
8.7.3.128 SYST:TIME:DAYL OFF|NAM|EUR ............................................................................................99
8.7.3.129 TEST:CURR:CONF <channel>,<current>,<polarity>...........................................................100
8.7.3.130 TEST:CURR[:STAT] <boolean>.............................................................................................100
8.7.3.131 TEST:LIN:ABOR ....................................................................................................................100
8.7.3.132 TEST:LIN:PAR?......................................................................................................................100
8.7.3.133 TEST:LIN:INIT........................................................................................................................100
8.7.3.134 TEST:LIN:REP<n>?...............................................................................................................101
8.7.3.135 TEST:LIN:REP:TIME?.............................................................................................................101

1594A/1595A Super-Thermometer
viii
8.7.3.136 TEST:LIN[:STAT]? ..................................................................................................................101
8.7.3.137 TEST:LIN:TIME? ....................................................................................................................101
8.7.3.138 TEST:LIN:TOL<n>?...............................................................................................................102
8.7.3.139 TEST:SYST:ABOR..................................................................................................................102
8.7.3.140 TEST:SYST:INIT .....................................................................................................................102
8.7.3.141 TEST:SYST:REP[<n>]?..........................................................................................................102
8.7.3.142 TEST:SYST:STAT?..................................................................................................................102
8.7.3.143 UNIT:TEMP C|K|F ..................................................................................................................102
9 Calibration ......................................................................................... 103
9.1 Introduction............................................................................................................103
9.2 SYSTEM TEST (F1) ................................................................................................103
9.3 CURRENT TEST (F2) .............................................................................................103
9.4 RATIO CALIBRATION (F3) .....................................................................................104
9.4.1 WRITE FILE (F1)............................................................................................................106
9.4.2 ADJUST PARAMETERS (F2) .........................................................................................106
9.5 RESISTANCE CALIBRATION (F4)..........................................................................106
9.5.1 WRITE FILE (F1)............................................................................................................107
9.5.2 ADJUST RESISTOR (F2) ...............................................................................................108
9.6 CALIBRATION PARAMETERS (F5) ........................................................................108
9.6.1 Calibration Interval ........................................................................................................108
9.6.2 Standby Current Check.................................................................................................109
10 Maintenance .......................................................................................111
11 Troubleshooting.................................................................................113
Index...........................................................................................................115

ix
Figures
Figure 1 PEM (Power Entry Module).................................................................................16
Figure 2 Front view ...........................................................................................................17
Figure 3 Front Panel Display.............................................................................................19
Figure 4 Rear view............................................................................................................20
Figure 5 External Resistor Inputs......................................................................................20
Figure 6 Power Entry Module...........................................................................................22
Figure 7 Location Descriptor Example .............................................................................23
Figure 8 Alpha-Numeric Interface ....................................................................................23
Figure 9 Measurement Screen..........................................................................................26
Figure 10 Channel Setup Screen......................................................................................29
Figure 11 Probe Menu Screen..........................................................................................34
Figure 12 Measure Menu Screen......................................................................................38
Figure 13 Measurement Process Block Diagram .............................................................39
Figure 14 Display Menu Screen........................................................................................46
Figure 15 System Menu Screen........................................................................................50
Figure 16 Input Wiring ......................................................................................................58
Figure 17 Super-Thermometer Web Interface ..................................................................68
Figure 18 Current meter connection diagram.................................................................103

1594A/1595A Super-Thermometer
x
Tables
Table 1 Symbols..................................................................................................................1
Table 2 Resistance Ratio Accuracy Specifications ............................................................6
Table 3 Resistor Stability Specifications .............................................................................7
Table 4 Absolute Resistance Accuracy Specifications ......................................................7
Table 5 Measurement Current Accuracy Specifications.....................................................8
Table 6 Temperature Measurement Noise Specifications...................................................8
Table 7 Relative Measurement Current Specifications .......................................................8
Table 8 General Specifications ...........................................................................................9
Table 9 Optional Accessories ...........................................................................................15
Table 10 Front panel key descriptions..............................................................................18
Table 11 Remote Operation Connections.........................................................................21
Table 12 Alert Messages ..................................................................................................27
Table 13 Recommended Reference Resistor for Various Probe Types ............................30
Table 14 Probe Conversion Information............................................................................35
Table 15 Default Statistical Fields .....................................................................................48
Table 16 Statistical Field Descriptions ..............................................................................48
Table 17 Recommended Reference Resistors and Sensing Current ...............................62
Table 18 Remote Operation Ports.....................................................................................65
Table 19 Report Operation Commands............................................................................70
Table 20 Recommended Resistors For Testing The Current ..........................................104