Fly Sky FS-GT3B User manual

V1.0
1
Overkillrc.com
GT3B Voltage Requlator Install Instructions
Written By
Austin Hutchison
Step 1:
Remove 4 screws located on top of the radio.

V1.0
2
Overkillrc.com
Step 2:
There are small plastic
latches that also hold the top in
place. The easiest way to pull the
top cover off is to push these latches
open, but it may knar up the plastic
alittle. If you don’t wish to knar up
the plastic you can take a chance
and muscle the top cover off,
however this may lead to worse
damage. To disengage the plastic
latches use a small flat head and
insert in the places shown on the
picture and gently pull up on the
cover…on the front side its located
near the diagonal on the screen pop
out, and the back side is located
directly across
Step 3:
With the antenna up pull the
top cover off. The rotary knob is
attached to the board as well. So it
would be smart to gently pry that off
the top cover with your fingernails or
small flat head screw driver. Other
side gently muscle off the cover, the
knob will come with it.

V1.0
3
Overkillrc.com
Step 4:
Gently pull the board towards
the front of the radio to pull the
power button out of its slot. Now
twist it so the screen side is resting on
the antenna. The antenna cable is
short and has a fragile connection to
the rf module. Make sure you do not
pull/apply any pressure to this cable,
as it can be a very difficult repair.
Twist the ST and TH trims buttons up
out of the case.
Step 5:
Now take a pair of snips/side
cutters and snip the leads of the
current voltage regulator as close as
you can to it. At the yellow line
Step 6:
Peel the one of films off of the
include adhesive. Apply the adhesive to
the back of the new voltage regulator;
apply a firm pressure to it. Now peel off
the other film.

V1.0
4
Overkillrc.com
Step 7:
Now stick the regulator in
position, make sure the pins are touching,
don’t need to be much.
Step 8:
Solder the pins together…It is
easier to-do if you pull the power button
off
Step 9:
Put it back together
Step 10:
Enjoy long battery life