Fly Sky FS-GT3 User manual

FS-GT3
Http://www.flysky-cn.com
Copy right 2008@flysky co.,ltd
Digital propotional radio control sytem
GT3
INSTRUCTION MANUAL
用户手册

M e n u
MODELS:FS-GT3
1
Digital propotional radio control sytem
Http://www.flysky-cn.com
1.Introduction.....................................2
2.Ser vices........................................2
3.The special symbols.............................3
4.Safty guides.....................................3
5.Batter y charging notes..........................4
6.Transmitter parameters.........................5
7.Receiver parameters............................5
8.RF module parameters..........................6
9.Receiver connectivity.. . . . ......................7
10.2.4G Operation notes 9..........................
11.Each par t of the transmitter....................11
Main menu..................... . . . . . . . ........13
MODEL SEL....................................14
Edit name...................... . . . . . . . ........14
Reverse.......................................15
Subtrim..................... . . . . . . . ...........15
DR...................... . . . . . . . ................16
END POINT....................................17
ARC...........................................18
DISPLAY.......................................18
ABS...........................................19
ST DELAY.....................................20
TH SPEED....................... . . . . . . ........21
PROG KEY.....................................21
13 EXPLODED DRWING..............................22
14.Packaging with content list.....................23
12.Transmitter function notes 12.....................

MODELS:FS-GT3
2
Digital propotional radio control sytem
Http://www.flysky-cn.com
1 . I n t r o d u c t i o n
2 . S e r v i c e s
If you found any problems during the operation process, please refer to the manual. If
the problem still exist, you could contact our dealers to found out the way to solve. And
you could also log on to our website service center:
HTTP:WWW.FLYSKY-CH.COM
Thank you for choosing 2.4 G ratio remote control digital products, if you are the first time
to use this type of products, please read this statement carefully and strictly in
accordance with the requirements of operation. You could refer to the Manual if you
meet any problems during the operation . Please well keep the manual after use because
you might have to use it again next time. Once again, thanks for buying our products,
如果 您在 使用 过程 中发现有问题，请您第一时间先查看说明书。问题如果还不能解决。您可以 跟我 们
的经销商联系解决。您也可以登录我们的服务中心网站：

3 . Th e sp e ci al s ym b ol s
Please pay attention to the following symbols when it appears on the manual,and read
carefully.
Prohibition Mandatory
4 . Sa ft y g ui de s
MODELS:FS-GT3
3
Digital propotional radio control sytem
Http://www.flysky-cn.com
Danger:
Warning:
Attention:
The sequence to shut down is that turn off the receiver power first, and then the
If the above operations are reverse, it might lead to uncontrolled and cause
停止使用前请您先关闭接收机电源然后关闭发射机电源。
以上 操作如 果反向,可能对 致失控,从而产 生意外!
Accident.
You need to turn the throttle channel(ch3) and inching switch to the lowest before
开机 使用时 请您勿必先 将油门通道 （CH3）及微调置最低端。然后打开发射机电源并检查电源
电量 ，再接 通接收机电 源。
You use. Then switch on the transmitter power ,finally connect the receiver.
Before you fly, please make sure the movement of server are correspond with the
在飞 行前,请您 务必先检查 伺服器的各 项动作是否与对应 操纵杆的方 向一致,如果不 一致,请调 整
后再 使用.
direction of joystick. If inconsistent, please adjust before fly.
Do not fly in bad weather such as rainy or thundering to assure the safety of
请您 不要在 夜晚，刮风 或下雨时使 用，因为这样的天 气环境会对 遥控设备产 生干扰,从 而导致失
控而 产生意 外!
you and others.
If the operator does not operate by following the instructions,the operator
如果 操作者 不按正常操 作方法操作 ，可能导致操作者 严重受伤， 甚至致命危 险！
may lead to serious injuries, even Mortal danger.
If the operator does not operate by following the instructions,the operator
如果 操作者 不按正常操 作方法操作,可 能导致操作者严重 外伤,重伤或者 致命情况!
may lead to serious injuries, even Mortal danger.
If the operator does not operate by following the instructions,the operator
如果 操作者 不按正常操 作方法操作,可 能会导致操作者轻 伤,但一般不会 对操作者造
may lead to minor injuries, but generally it will not cause serious injuries
to the operator.
成重 伤!
transmitter power.

5 . Ba tt e ry c ha rg i ng n ot es
5.01Transmitter charger:
A. Install the battery to transmitter with correct direction, and cover it.
B. Connect the charger to the main connector.
C. Connect the charger to the transmitter
Connector.
D. Cut off the power supply immediately after
Recharge completed.
A. Connect the charger to the main connector.
B. Connect the Rechargeable receiver with battery charger
C. Recharge completed, cut off the power supply immediately.
MODELS:FS-GT3
4
Digital propotional radio control sytem
Http://www.flysky-cn.com
If your transmitter, receiver using a nickel-cadmium, nickel-metal hydride rechargeable battery,
you have to well-check before you fly. If lack of electricity, it could happen those phenomenon
like inadequate control or out of control, resulting accident. So please charge immediately when
如果您的发射机.接收机使用的是镍镉.镍氢等可充电电池,在飞行前请您务必检查电池电量.如果电量不
足,可能导致控制距离不够或者失控的现象,从而产生意外.所以电池电量不足时请及时充电.
If you are using a nickel-cadmium, nickel-metal hydride batteries for recharging, please use our
company dedicated charger. If the electrical current is too large and it may lead to temperature
over-heated and cause fire burning accident. Please cut off the power supply immediately after
recharging. Please take out the battery from the transmitter when you are not using it within a
period, it is because the battery may damage the aircraft batteries, thus being exposed.
如果您使用的是镍镉.镍氢电池进行充电,请您使用我们公司的专用充电器.因为如果充电电流太大可能
导致电池温度太高,从而燃烧起火带来意外。充电完成请您即时切断电源。当您长时间不使用时请您
电池从发射机中取出，因为电池可能导致发射机电池片损坏，从而接触不良。
5.02Receiver charger:
1.将可充电电池按方向装入发射机，并合上电池盖；
2.将充电器插入市电接口；
3.将充电器充电接头插入发射机充电接口；
4.充电完成后，即时将电源切断。
1.将充电器插入市电接口；
2.将可充电接收机用电池接口与充电器充电接口连接；
3.充电完成后,即时将电源切断.

MODELS:FS-GT3
5
Digital propotional radio control sytem
Http://www.flysky-cn.com
6.T r a n s m i t t e r p a r a m e t e r s
187mm
288mm
7 . Re ce i ve r pa ra m et er s
1.通道数：3个通道；
2.适合机种：车，船；
3.发射功率:小于20dbm(FM 小于0.8W）；
4.调制方式：FM/GFSK（2.4G）；
5.编码方式：数字；
6.数据分辩率：1024级；
7.LCD型号:128*64点阵；
8.低电压报警功能:有(低于9伏后)；
9.数据输出接口:有(3.5音频接口）；
10.充电接口：有（内正外负）；
11.电源标准:12VDC(1.5AA*8)；
12.整机重量：558g;
13.天线长度：115/26mm(2.4G);
14.外型尺寸：187*144*288mm;
15.外观颜色：黑色；
16.认证:CE FCC；
Specifications:
Specifications:
A.channels:3 channels;
B.model type:car/boat;
C.RF power:less than 20dbm/0.8W
D.modulation:FM/GFSK;
E.Code type:digital;
F.sensitivity:1024;
G:LCD type:128*64 dot;
H.low voltage warning:yes(less than 9W) ;
I.DSC port:yes(3.5mm) ;
J.charger port:yes;
K.power:12vdc(1.5aa*8) ;
L.weight:558g;
M.ANT lenth:115/26mm(2.4g);
N.size:187*144*288mm;
O.color:black;
P.certificate:CE FCC;
MODEL:FS-GT3
MODEL:FS-GR3A
1.通道数：3个通道；
2.适合机种：车，船；
4.调制方式：GFSK；
5.数据分辩率：1024级；
8.整机重量：5g;
9.天线长度：26mm;
10.外型尺寸：37.6*22.3*13mm;
11.外观颜色：灰色透明；
12.认证:CE FCC；
A.channels:3 channels;
B.model type:car/boat;
D.modulation:GFSK;
E.sensitivity:1024;
G.power:4.5-6vdc;
H.weight:5g;
I.ANT lenth:26mm;
J.size:37.6*22.3*13mm;
K.color:gray semi-transparent;
L.certificate:CE FCC;
C.frequency bank:2.4G
F.RF.receiver sensitivity:-76dbm
3.频率：2.4G；
6.接收灵敏度：－76dbm;
7.电源：4.5－6伏；

MODELS:FS-GT3
6
Digital propotional radio control sytem
Http://www.flysky-cn.com
8 . RF m o d u l e pa ra m et er s
1.通道数：2个通道；
2.适合机种：车，船；
4.调制方式：PPM；
5.数据分辩率：1024级；
8.整机重量：15g;
9.天线长度：100mm;
10.外型尺寸：46*32*25mm;
11.外观颜色：黑色；
12.认证:CE FCC；
3.频率：27.35.40MHz；
6.接收灵敏度：－80dbm;
7.电源：4.5－6伏；
FM 高频模块
频率：35.40.72MHz
功率：小于或等于0.8W
尺寸:65*52*22mm
重量:29g
适合机种:FS-TH9X/FS-GT3
FM RF module
Frequency:27.35.40MHz
RF power:less than 0.8W;
Size:65*52*22mm;
Weight:29g;
Model type:FS-TH9X/FS-GT3
2.4G高频模块
频率:2.4G
功率:小于或等于10mW
尺寸：52*65*38mm
重量:33g
适合机种:FS-TH9X/FS-GT3
MODEL:FS-HTM01
MODEL:FS-GR2
MODEL:FS-TM001
Specifications:
Specifications:
Specifications:
A.channels:2 channels;
B.model type:car/boat;
D.modulation:PPM;
E.sensitivity:1024;
G.power:4.5-6vdc;
H.weight:15g;
I.ANT lenth:26mm;
J.size:46*32*25mm;
K.color:black;
L.certificate:CE FCC;
C.frequency bank:27.35.40MHz
F.RF.receiver sensitivity:-80dbm
2.4G RF module;
Frequency:2.4G;
RF power:less than 20dbm;
Size:65*52*38mm;
Weitht:33g;
For model type:FS-TH9X.FS-GT3.

MODELS:FS-GT3
7
Digital propotional radio control sytem
Http://www.flysky-cn.com
Receiver接收
Servo伺服器
CH1
CH2
9 . Re ce i ve r co nn e ct iv it y
SPC调速器
SWITCH
BATTERY电池
MOTOR马达
9.01 INSTALLATION WHEN AN MOTOR CONTROLLER IS USED
带马达模型的安装连接
注：在安装接收机时请将接收机天线与水平面垂直放置！且天线尽可能不要靠近金
属物！因为这样接收灵敏度最高。(如图1）
开关
Remark:Place the antenna of the receiver vertically with the plane!
And don't let it close to the metal thing for assuring its sensitivity.(See pic1)
Receiver
ANT
Figure 1

9.02 INSTALLATION FOR GAS POWERED MODELS
发动机模型的安装
MODELS:FS-GT3
8
Digital propotional radio control sytem
Http://www.flysky-cn.com

MODELS:FS-GT3
9
Digital propotional radio control sytem
Http://www.flysky-cn.com
1 0 .2.4 G O pe ra t io n no te s
Match line
对码线
Figure 1
Bind key
10.01 Matching (code)
A. Install the battery to 2.4G transmitter and shut it down.
B. / ( 1）。Insert the matching lines to the channel BIND CH3 port of the receiver. Figure.
C.Connect the receiver battery to VCC port of the receiver, on the same time the two LED are flashing
D.Press and hold the button on the transmitter, and then switch on the power supply.
F.Release the match button on the transmitter, take out the match line.
E. Observe the LED on the receiver, if found that the LED is not flash anymore and that means successful
G.Install the server and then test.
H.If the tests fail, please repeat the action above.
I.If the tests success, then insert the power supply port into VCC, match complete.
(The above ways of match is only suitable on FLYSKY 2.4G products)
Our products are well matched in the factory, you do not need to match by yourself. But if your
are going to match the receiver with other transmitter, or you need to change a new receiver
or transmitter, please follow the following steps:
and this means the receiver are going to the match status.
Matched. This process about 5s（ )
我们的产品在出厂前以经过配对，您无需做配对动作便可使用。但如果您要将接收跟另外
的发射机进行配对使用，或者您要更换新的接收机或者发射机，请您按如下的步聚进行：
注:我们的接收发射系统,不跟其它品牌兼容!
3.将接收机电池插入接收机的VCC通道接口,此时可看到接收机的LED在闪烁,此表示接收机进入配
5.观察接收机上的LED,如果发现LED不再闪烁表示配对成功.(注:此过程大约时间为5S左右）.
1.将2.4G发射机装好电池，并关闭发射机。
2.将配对线插入接收机的BIND/CH3通道接口（如图1）.
4.将发射机上的配对键(BIND)按住，然后打开发射机电源开关。（注：不要松开按键）。
6.松开发射机上的配对按键,拔掉接收机上的配对线.
7.将伺服器装上并通电测试.
8.如果测试NG,则重复以上动作.
9.如果测试OK，则将电源接头插入VCC，配对完成。
注:以上配对方法,仅适合于FLYSKY的2.4G产品。
对状态.
LED
Battery
电池
Receive
接收
对码按钮

MODELS:FS-GT3
10
Digital propotional radio control sytem
Http://www.flysky-cn.com
Power on
A.Cut off the receiver power supply.
B.Cut off the transmitter power supply.
Tx power ON
Tx power off
Rx power ON
Rx power off
Shut down
10.03 Shut down：
10.02 power on:
A.Connect every part.
B.Switch on the power supply.
C.Connect the power supply.
D.Receive LED light solid.
E.Finish and use.
1.关闭接收机的电源；
2.关闭发射机的电源.
1.将各部件连接好；
2.打开发射机电源开关；
3.连通接收机电源；
4.接收机LED恒亮；
5.使用.

MODELS:FS-GT3
11
Digital propotional radio control sytem
Http://www.flysky-cn.com
L
L
M
M
N
N
O
O
DSC
CHATGER
SWD
SWE
J
J
K
K
I
IMODULE AUX SW THROTTLE TRIGGER
5
6
8
7
9
A
B
C
D
E
F
G
H
SWB
(default throttle trim)
LCD SCREEN
POWER SW HOOK
5SWF2 6SWA
(default steering trim)
7FM ANT 82.4G ANT
9UP
(edit key)ADOWN
(edit key)
CENTER
(edit key)
DBACK
(edit key)ESWC
GSWF1
HBAT BOX
FSTEERING WHEEL
BDIAL
(edit key)
FRONT
SIDE
BACK
1 1 .E ac h p ar t of t he t r an sm it t er

MODELS:FS-GT3
12
Digital propotional radio control sytem
Http://www.flysky-cn.com
ST TRIM BEEZ
POWER VOLTAGE
TH TRIM
LOGO
MODEL NAME
1 2 .T ra n sm it te r f un ct io n n ot es
DR SW ON
ABS SW ON
ABS START
LCD MAIN PAGE
ST TRIM:方向舵微调状态.
BEEZ:系统操作声音( 表示声音开启； 表示声音关闭).此功能开启的方式是:在开机后
长按
POWER VOLTAGE:电源电压显示；当低于9.0V时发射机会发出报警.
TH TRIM:油门微调状态.
LOGO:感谢您使用 公司的产品.
MODEL NAME:此信息是你 的发射机当 前使用机种 名称；此款 发射机最多 可存储8个机种模式 .
DR SW ON:大小动开关以开启此功能需提前进行设定后才有，详情见PROG KEY菜单）.
ABS SW ON:此显示表示ABS起动开关以开启(此功能需提前进行设定后才有，详情见
PROG
ABS START:此显示表示ABS正在运行中.
Thanks for using flysky's products.
LOGO:
This transmitter can save 8 type of models,
you can give them each a name.
MODEL NAME:
BEEZ: The system operation voice,operation voice( means open, means shut off).
POWER VOLTAGE:Display the power voltage, there is a warning voice when the voltage lower
ABS SW ON:This means the ABS is switch on,this function need to be set in advance the details ,
Before open this function should set it in advance, pls see the PROG
DR SW ON:
ABS STRAT: This means the ABS function is in run.
TH TRIM: Throttle in the trimming status.
ST TRIM: steering system in the trimming status.
than 9.0v
KEY menu.
pls see the PROG KEY menu.
KEY菜单）.
BACK键

MODELS:FS-GT3
13
Digital propotional radio control sytem
Http://www.flysky-cn.com
M a i n m e n u
功能说明：显示所有可调整的菜单，共计12项
操作方法：通过UP/DOWN 键或旋扭按键来选择相对应菜单；并按确定键进入
参数说明:
MODEL SEL：这款发射机可提供8个存放机种，并可随时调出使用。
NAME EDIT：名字的编写；
REVERSE：正反向设定
SUBTRIM：辅助微调
DR：双重比率大小动作调整
E POINT：舵角量调整
ARC：油门及方向曲线调整；
DISPLAY：通道输出状态显示；
ABS：刹车防抱死设定；
ST DELAY：方向舵反应速度设定；
TH SPEED：油门反应速度设定；
PROG KEY：可编程按键设定
RIGHT:+
LEFT:-
Press button:ENTER
UP
DOWN
ENTER
BACK
Function Introduction:
Parameter Introduction:
Name edit:you could edit your own brand or name itto the tx
Reverse:forward and reverse setting;
Subtrim:assistant trim;
DR:double rate dr adjustment;
E point:to adjust the angle of each channel;
ARC:adjustment of the throttle and steering system curre.
Display:display the channel output status;
ABS:anti-skid brake system;
ST delay:set the reacting speed of the steering system;
TH speed:set the reacting speed of the throttle.
PROG key:set the programmable key.
Model sel:this tx can save 8 different models.and you can get to use any one of them
Operation Method:
Choose the menu by press the UP/DOWN button, and then press ENTER to enter in.
To display all the 12 menus..
in any time.
Page1 Page2

MODELS:FS-GT3
14
Digital propotional radio control sytem
Http://www.flysky-cn.com
M OD EL S EL
E d i t n a m e
功能说明:此款发射机可提供8个存储机种模式.通过此菜单可进生随意更换.
操作方法:通过U P /D OWN键或D I A L按键来选择想要的模式,并按确认键调出
参数说明:MO DE L1－MO DE L 8是八个完全独立8个不同的机种模式参数.
功能说明:此功能是对当前机种模式进行命名,以方便记忆和区分.此名字可进
操作方法:通过U P /D OWN键选择对名字的第几位进行编写,通过旋扭按键来选
名字长度:最长8位.
可用字符:0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[ \]
参数说明:
及空格.
以达到不同机型无需返复设定的目的.方便操控者用同一发射机来
操控不同机型.
并返回,如不想变更当前模式,则按EXIT键取消并退出.
FLYSKY0是该机种的名字,此名字是可由您自已编写的.
行任一编写.完全可按使用者的意愿进行编写.
择想要的字母或字符.完全编写完成后按确认键存储并返回,如不想
变更当前名字,则按EXIT键取消并退出.
FLYSKY0 is the original model name, you can edit it by yourself.
Function Introduction:
This function is to name the 8 models in order to memory and distinguish.
Function Introduction:
Operation Method:
Parameter Introduction:
Operation Method:
Parameter Introduction:
Select the position which need to be changed by the UP/DOWN key,Select the word
you needed by the knob switch,after finished, press the enter key to save and return
Back.if you don't want to change the name, just press exit key to cancel and exit.
Name Length: The longest is 8 words.
Available words: 0 1 2 3 4 5 6 7 8 9 ;:<=> @ ABCDEFGHIJKLMNOPQRSTUVWXYZ[
\] and blank.
MODEL1-MODEL8 are 8 different model parameter.
Select the models by the key UP/DOWN or the knob.
This transmitter can save 8 type models so that you the user can use one transmitter
control different models.

MODELS:FS-GT3
15
Digital propotional radio control sytem
Http://www.flysky-cn.com
R e v e r s e
S u b t r i m
功能说明:此功能是对输出通道(方向,油门和三通道)做正反向的调整;以便适
操作方法:通过U P /D OWN按键来选择将要调整的通道,然后通过旋扭按键来
参数说明:
ST:方向通道；
TH:油门通道；
CH:通道名称；
REV:反转；
功能说明:此功能是对伺服系统(方向,油门和三通道)进行辅助调整,这样可以
使操控者更方便快捷调整机型;最终使车模在直线行使时直线度最佳.
操作方法:通过U P /D OWN按键选择要调整的通道;然后通过DI AL按键来进行
参数说明:
VALUME:＋120到－120.
应不同的伺服系统和不同装配方式,以达到最终正确的操作方式.
进行改变,完成后按确认键存储并退出,如果按EXIT键则不存储退出.
对伺服系因结构或装配问题所产生角度偏差的问题进行修正;从而
数据的调整;直到你的伺服系统角度达到你的要求;完成后按ENTER
键存储并退出;如果按EXIT键则不存储退出.
AUX:第三通道(辅作通道)。
NOR:正常；
ST :方向通道；
STATE:通道状态；
TH :油门通道；
CH:通道名称；
Function Introduction:
Function Introduction:
Operation Method:
Parameter Introduction:
Select the adjustment channel by the key UP/DOWN, change the value by the key DIAL
To do the assistant adjustment of the servo system (rudder, throttle and The third
channel)this can amend the servo angel deviation created by the structurer and assemble
Problem.
until the servo angel arrive at your requirement, after finished,press ENTER to save and
exit, if press EXIT directly then the data won't be saved.
CH: channel name
TH: throttle
ST: steering system channel;
Range: from +120 to -120.
Adjustments the forward and reverse direction of the outputs channel rudder, throttle
Operation Method:
Parameter Introduction:
Select the adjustment channel by UP/DOWN key, adjustments by the knob switch,
CH: channel name
TH: throttle channel
STATE: the status of the channel
ST: steering system channel
NOR: normal
AUX: The third assistant channel
REV: reverse
and the third channel to apply to the different servo system and assemble methods.
after finished press enter key to save and exit.

MODELS:FS-GT3
16
Digital propotional radio control sytem
Http://www.flysky-cn.com
DR
功能说明:此功是对方向通道进行双重比率输出控制,以便得到两种不同的操
作模式,来适应不同的操作要求.进而可以得到最佳的操控结果.此动
操作方法:通过U P /D OWN按键选择项目,然后通过D IA L按键来进行数据的调
整;完成后按ENTER键存储并退出,如果按EXI T键则不存储退出.
ST:表示方向通道；
参数说明:
DR:当前状态; ON表示已打开,OFF表示此功能没开启.
数据调整范围:0％ －10 0％;0%表示伺服器动作最小,10 0％表示
作可通过按键随时打开和关闭;并可以通过外部按键进行数据调整
(一般设定在SWD按键).按键的设定见PR OG K EY菜单.
伺服器动作最大.
此功能用于改变对围绕空档位置所做转向操作的灵敏度，和使得前进与刹车方向运动显得更
EXP: 指数型操作设定;
迅速或柔顺,调节其值不影响最大行程。
Function Instruction:
Operation method:
choose the item by UP/DOWN button,then adjust the data by the knob,then save the
Double output control to get 2 different operation mode and suitable for different operation
requirement. This function can be shut or open by a button in anytime normally, we set this
data and press"ENTER"to quit the adjustment,if press"EXIT"it means quit the system
directly without saving the data.
Parameter Introduction:
function to the key SWD, pls see PROG KEY menu.
EXP: exponential operation setting: this function is used to change the sensitivity of the servo
ST：steering system
DR: The current status, ON means this function opened, OFF means this function closed.
around the neutral position. It has no effect on the maximum servo travel.

MODELS:FS-GT3
17
Digital propotional radio control sytem
Http://www.flysky-cn.com
END POIN T
参数说明:
功能说明:此功能是对输出舵量大小(方向,油门和三通道)进行调整,以便让你
调整,此功能亦可以对伺服系统的不对称进行修正,以便使左右舵量
达到比率对称;从而得到最佳操控结果.
操作方法:通过U P /D OWN按键选择需要改变的通道,并使用当前相对应的操
然后通过DIAL按键来进行数据的调整;完成后按ENTER键存储并
退出,如果按EXI T键则不存储退出.
ST :表示方向通道；
数据调整范围:－10 0％到10 0％
DN:输出下半程；
AUX:辅助通道（第三通道）
UP:输出上半程；
TH :表示油门通道；
CH:通道名称；
的舵量达到你的要求.此调整分为两部分,可进行单边(UP或DOWN)
控杆(方向控制盘或油门扣手及A UX开关)选择单边(U P或DOWN).
To choose the channel by UP/DOWN button,use the current control Stick (direction
Function Instruction:
use this when performing left and right steering angle adjustments, throttle high side/brake
Operation method:
control disc or throttle ouch or the AUX switch)to choose the single side,Then adjust
the data by the knob,then save the data and press"ENTER"to quit the Adjustment,if
press"EXIT"it means quit the system directly without saving the data.
Parameter Introduction:
ST:means direction channel;
TH:means throttle channel;
CH：channel name
UP: the first haft part of outputs
DN: the second half part of outputs.
AUX: the assistant channel(channel 3);
Range: from -100% to 100%
side operation amount adjustment, and channel 3 servo up, side/down side operation amount
adjustment during linkage.Correct the maximum steering angle and left and right steering
angles when there is a difference in the turning radius due to the characteristics, etc. of the
Vehicle

MODELS:FS-GT3
18
Digital propotional radio control sytem
Http://www.flysky-cn.com
ARC
功能说明:此功能属于一种高级的专业设定功能,它是对输出数据(方向通道和油门通道)进
行曲线的设定,以达到输出能跟马达,引擎及伺服系更加匹配更加合理,使其达到
最佳工作效率，此项功能也可以跟具使用者在使用时的习惯来进行设定,以达
到最佳的操作感觉.同样在不同的赛道环境和场地不同的情况下,可进行适当
操作方法:此分两级,前级有两项,分别是ST和TH,通过UP /D OWN按键选择需要改变的通道(ST
或TH),然后按确认键进入下一级菜单.第二级页面分5个设定点(L,1,2,3,H),通
过UP / DO WN按键选择需要改变的点,再通过DI AL按键来进行数据的调整;完成后
按确认键存储并退出,如果按EXIT键则不存储退出.
ST :表示方向通道；
TH :表示油门通道；
L:0－100;1:0－100;2:0－100;3:0－100;H:0－100.
参数说明:
功能说明:此功能时对所有输出通道(方向,油门和三通道)的数据进行检查及
操作方法:在主菜单下选择D ISP LA Y菜单按确认键进入即可。
参数说明:
ST :表示方向通道;
TH :表示油门通道;
AUX:辅助通道(第三通道).
DISPL A Y
的调整,从而让你的车子和操作达到完美.
监测.可检查通道的输出量及输出方向。
Operati on Method:
Operati on Method:
Operation introduction:
Operation introduction:
this function is a kind of high class professional setting system, it can be used to set
the output curve to let the output to match the motor,engine and servo much better,
and anc it also can according the operator's feeling to set to get to get theoptimal
operation feeling.
We need to set 2 channel ST and TH,press the UP/DOWN button to select the cha-
nnel which you want to set, then press DIAL key to next class manual.the next manual
has 5 setting points:L,1,2,3 and H,choose the point by press the UP/DOWN button,
then adjust the data by the DIAL key,then save the data and press"ENTER"to quit the
adjustment,if press"EXIT"it means quit the system directly without saving the data.
ST: steering system channel;
TH: throttle channel;
L: 0-100;
1: 0-100
2.: 0-100
3: 0-100
H: 0-100
This function is to display and check the output data.
Enter the main manual then choose the display manual to enter in.
ST:steering system channel;
TH:means the throttle channel:
Parameter Introduction:
Parameter Introduction:
AUX: the assistant channel (channel 3).

MODELS:FS-GT3
19
Digital propotional radio control sytem
Http://www.flysky-cn.com
功能说明:此功能属于一种高级的专业设定功能,它的功能是用于车子的防抱
操作方法:通过U P /D OWN按键选择需要改变参数的项目,再通过旋扭按键来进
参数说明:RANGE:刹车时舵角输出量,数据调整范围:0－100；
CYCL:刹车ABS频率;数据调整范围:0－1 0 0；
DUTY:刹车点时间;数据调整范围:0－100；
DELAY:ABS的刹车起动延时功能设定.数据调整范围:0－100；
LEVEL:在手动模式下的刹车起ABS的起动点.数据调整范围:0－100；
STM:采用打方向舵模式(也就是只有在转弯时启动ABS).
此模式下需设定一个起动初始值(最低:01 5，最高:100),且方向舵两边都需设定。
MA N UA L:手动模式.此模式可通过按键进行开启或关闭。
AB S
死功能设定;使其达到最佳的轮胎抓地力。以便操控者在转弯或刹
车时得最佳的控制能力.使操控者更容易操控车子,也使车子达到最
佳的行使路线和刹车效果.
行数据的调整;完成后按确认键存储并退出,如果按EXIT键则不存储
退出.
Function introduction:
To choose the item by press the UP/DOWN button, then adjust the data by the knob, then save
RANGE: The range of the output range when brake. Scope: 0-100
CYCL: The brake ABS frequency. Scope:0-100
DUTY: The brake time per point. Scope: 0-100
LEVEL: The brake ABS start point after manually operation mode. Scope: 0-100
STM: under the mode of turn the rudder which means start the ABS only when turn direction
Operation Method:
MANUAL: The hand operation mode which can be shut or opened by a button.
the data and press “Enter” to quit the adjustment, if press “EXIT” it means quit the system di-
rectly without saving the data.
that we need to set a starting value for 2 side of the direction rudder, the lowest value is 015,
the highest is 100.
Parameter Introduction:
WITHOUT ABS WITH ABS
This function is a kind of high class professional setting system,to set the car's anti-
skid brake system.