Siemens miniTek User manual

miniTek
remote control • távirányító • telecomandă •
télécommande • Fernbedienung • miniTek
English
Magyar
Română
Français
Deutsch
ﻲﺑﺮﻋ

2
English 3
Magyar 33
Română 61
Français 89
Deutsch 121
ﻲﺑﺮﻋ 153

3
Content
EN
HU
RO
FR
DE
AR
Content
miniTek 4
Intended use 8
General notes on safety 9
Basic functions 12
Bluetooth 16
Using miniTek with cell phones and landline phones 17
Using the transmitter 19
Using the line-in audio input 23
Using miniTek with a third party
Bluetooth transmitter 24
Using miniTek with a public loop system 26
Accessories 27
Maintenance and care 28
Disposal information 29
Technical information 30

miniTek
4
miniTek

miniTek
5
EN
HU
RO
FR
DE
AR
① Telephone button
② Stand-by for hearing instruments; mute
③ miniTek on/off
④ Audio source button
⑤ Volume up / volume down
⑥ Program change button
⑦ 2.5 mm stereo socket
⑧ DAI port for FM receiver
⑨ Socket for power plug
⑩ Microphone openings
⑪ Slots for fixing the clip
⑫ Lanyard attachment
⑬ Power LED

miniTek
6
Included in delivery
■ miniTek with lanyard and clip
■ Transmitter
① On/off switch
② Sound level
③ Socket for power plug
④ 2.5 mm stereo socket
⑤ LED
■ 2 Power plugs with country specific adapters (one for
remote control, one for Transmitter)

miniTek
7
EN
HU
RO
FR
DE
AR
■ Cables:
□ 1.8 m audio cable with 3.5 mm
stereo plug on one side and a
2.5 mm stereo plug on the other
side
□ 0.3 m audio cable with 3.5 mm
stereo plug on one side and a
2.5 mm stereo plug on the other
side
■ Adapter set:
□ 2.5 mm stereo plug to 3.5 mm stereo socket
□ 6.3 mm stereo plug to 3.5 mm stereo socket
□ RCA (cinch) to 3.5 mm stereo socket
□ RCA (cinch) to SCART

Intended use
8
This remote control is intended to operate hearing
instruments.
Read and follow the instructions of this user guide to
avoid injuries or damage to remote control.
Symbols:
Be aware of information marked with the warning symbol
WARNING, CAUTION or NOTICE!
WARNING points out a situation that could lead
to serious injuries,
CAUTION indicates a situation that could lead to
minor and moderate injuries.
NOTICE NOTICE indicates possible property damage.
Advice and tips on how to handle your device
better.
Instruction. Indicates that something has to be
done.
Intended use

9
EN
HU
RO
FR
DE
AR
General notes on safety
WARNING
Wireless systems may interfere with measuring
devices and electronic equipment.
Turn the remote control off when in hospitals or
airplanes.
Prior to use in conjunction with an electronic
implant or life supporting system, have the
electromagnetic compatibility verified.
NOTICE
The remote control is sensitive to extreme heat,
high humidity, strong magnetic fields (>0.1T),
X-rays and mechanical stress.
Do not expose the remote control to extreme
temperature or high humidity.
Do not leave it in direct sunlight.
Do not immerse it in water.
Do not place your remote control in a micro-
wave oven.
NOTICE
Operating temperature: charge min. 0°C to max.
45°C; discharge min. -20°C to max. 60°C
Storage conditions: min. -20°C to max. 60°C;
low humidity
General notes on safety

10
General notes on safety
In some countries restrictions for the usage of
wireless equipment exist.
Refer to local authorities for further informa-
tion.
The performance of the e2e wireless function may
be affected by electromagnetic interference –
e.g. from a computer monitor or fluorescent lamp
system.
Move away from the source of interference if
you experience difficulty.
In the event your hearing instruments can be
controlled by another person's remote control,
return hearing instruments and remote control
to your Hearing Care Professional.
WARNING
Risk of interference with cardiac pacemakers.
Do not use the remote control if you are fitted
with a cardiac pacemaker.
WARNING
Hazard of explosion in gas-filled spaces!
Do not use your hearing instruments and re-
mote control in areas where there is danger of
explosions (e.g. mining).

11
EN
HU
RO
FR
DE
AR
General notes on safety
WARNING
Strangulation hazard when lanyard gets entangled
in e.g. moving mechanical parts of machines.
Use only the delivered breakaway lanyard. It will
automatically detach when entangled.
WARNING
Choking hazard posed by small parts.
Keep batteries, small parts and remote control
out of children‘s reach.
If swallowed consult a physician or hospital im-
mediately.
NOTICE
Use only original Siemens power adapter (model
no. KSAA0500080W1UV-1; input: 100-240V ~, 50-
60 Hz, 180 mA, output: 5 V, 800 mA, protection
class II, only for indoor use).
NOTICE
Please make sure that the power plug is easily ac-
cessible to remove it from power supply if neces-
sary.

Basic functions
12
Before first use
Charge miniTek before first use.
Charging
Connect miniTek with the power plug to a power sup-
ply.
Charging is complete when the power LED shines
green.
Power LED state
Battery full Battery nearly
empty
miniTek off off off
miniTek on flashes green flashes red
miniTek off/
charging
green constantly red constantly
miniTek on/
charging
pulses green pulses red
Turning off
miniTek
green / turns off
slowly
red / turns off
slowly
Turning on
miniTek
green for 3 seconds,
then flashes green
red for 3 seconds,
then flashes red
If you turn on miniTek and the battery is empty, the LED
rapidly flashes red for 3 seconds, then turns off.
Basic functions

Basic functions
13
EN
HU
RO
FR
DE
AR
Wearing miniTek
Wear miniTek no further than 60 cm (24 inches) away
from the hearing instruments.
Use lanyard or clip to wear miniTek.
Turning the miniTek on/off
Press for about 3 seconds to turn miniTek on.
All LEDs shine for 3 seconds, then only the power LED
shines.
Press for about 3 seconds to turn miniTek off.
All LEDs shine for 3 seconds, then turn off slowly.
Changing the hearing program
Press to change the hearing program.
Each time you press the program button, your hearing
instruments switch to the next program, confirming
each change with an acoustic signal.
Changing the volume
Press to increase the volume.
Press to decrease the volume.

Basic functions
14
Turning the hearing instruments on/off
Press for about 3 seconds to turn your hearing
instruments off (stand-by).
Press for about 3 seconds to turn the hearing
instruments back on.
Changing the external audio source
Press to change the external source.
Each time you press , your miniTek switches to the
next available external source according to the following
overview:
Sequence of external source (if connected)
FM transmitter (DAI)
Line-in (2.5 mm stereo socket)
First transmitter
Second transmitter
Third party Bluetooth transmitter
T-coil

Basic functions
15
EN
HU
RO
FR
DE
AR
Your Hearing Care Professional has to configure
your miniTek for external devices.
Press the program button to stop listening to
the external audio source and switch back to the
hearing programs.
While using an external audio source you can press
to turn the microphones of your hearing
instruments off and on again.
The hearing instruments will switch automatically to the
telephone program when your phone rings.
Press to answer the phone.
Press to terminate the call.
Your hearing instruments will change back to the audio
program after terminating the call.
OR
Press for about 3 seconds to reject the call.

Bluetooth
16
Bluetooth is a wireless standard that provides a way to
connect wireless devices like cell phones, TV, headsets
and others.
Using a Bluetooth connection, the devices can exchange
information such as data, sound or even control com-
mands. The Bluetooth connection has a range of about
10 m (32 ft). Walls or objects between the devices can
shorten this distance.
The Bluetooth symbol denotes if a device is
Bluetooth compatible.
The miniTek can be paired via Bluetooth with up to two
phones, two transmitters and a third party Bluetooth
transmitter (e.g. mp3 player or laptop) at the same time.
The following chapters give instructions about how to
connect your phone, TV or mp3 player with your hearing
instruments.
Bluetooth

Using miniTek with cell phones and landline phones
17
EN
HU
RO
FR
DE
AR
When you are making a call with a Bluetooth compatible
phone or cell phone, the miniTek allows you to use your
hearing instruments as a wireless headset.
Instead of using the telephone microphone, you speak
into miniTek and listen through your hearing instruments.
Pairing
Before you can use miniTek with your phone, you need to
pair them:
Press for about 3 seconds to turn miniTek on.
Activate the Bluetooth function in your phone.
Press for about 5 seconds to start pairing miniTek
with your phone.
When pairing mode has been activated, all 3 buttons (on/
off button, telephone button and audio source button)
shine for 3 seconds, then the telephone button flashes.
Search in the menu of your phone for other Bluetooth
devices.
Choose "RCU Connect" to pair miniTek and the phone.
Enter the PIN "0000" if requested.
Refer to the user guide of your connected
device for more detailed information on how to
link devices via Bluetooth.
Using miniTek with cell phones
and landline phones

Using miniTek with cell phones and landline phones
18
Accepting an incoming call
Press to accept the incoming call.
Speak into miniTek's microphone to talk.
Press to terminate the call.
Your hearing instruments switch back to the hearing
program you used before taking the call.
If paired with two phones, miniTek uses different
ring tones to distinguish incoming calls.
Rejecting an incoming call
Press for about 3 seconds to reject the incoming
call if supported by the phone.
Making a call
Dial the desired number on your phone.
Press twice to transfer the connection from your
phone to the miniTek.
Press twice to transfer the connection from the
miniTek back to the phone.
If your phone transfers the connection automatically you
do not need to press .

Using the transmitter
19
EN
HU
RO
FR
DE
AR
① On/off switch
② Sound level
③ Socket for power plug
④ 2.5 mm stereo socket
⑤ LED
Before first use
Charge transmitter before first use.
Charging the transmitter
Connect the transmitter with the power plug to a
power supply.
While charging the LED shines red.
Charging time is about 5 hours depending on the sta-
tus of the rechargeable battery.
Using the transmitter

Using the transmitter
20
Turning the transmitter on/off
Use the on/off switch to turn the transmitter on.
The LED flashes blue while searching for a connection
to the miniTek, then the LED shines blue.
Use the on/off switch to turn the transmitter off.
Turn the transmitter off when it is not in use.
Sound level
Press the sound level button to change the volume of
the audio signal.
The LED flashes blue. The number of times the LED
flashes (up to 5), indicates the volume level.