Flycam FLCM-FLN-PA User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Flowline with Stabilizing Arm (FLCM-FLN-PA)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
A s s e m b l y M a n u a l
Tensioner Spring Safety Shock Cord
Flowline Placid
Body Suppport Storage Bag

2
 Join support bar with secon of support
jacket by push-t technique. Similarly, join
front secon with support bar as shown.
 Wear support jacket and ghten the buckles
provided at waist and chest and adjust as per
your convenience.
NOTE: The four knobs provided on back of
support jacket allows height adjustment of
support bar.
Flowline Vest Setup
 Aach camera to hook and ghten with
provided knob to ensure slip-free connecon.
 Use spring at back of support jacket to adjust
tension of rope as required.
 Loosen knob at support bar to adjust posion
of camera according to eye-level, if required.

3
 Rotate the knob to release the spring tension.
 Loosen the knob of Hook and remove the
spring of Hook.
 Now loosen the knot of rope in order to
remove the rope from hook. Remove
extension arm of Flowline. Re-aach arm
upside down and ghten the knob properly
 Now pass the rope through Placid adapter as
shown in the image. Mount Placid on
Flowline arm and ghten the Allen bolt with
help of Allen key.
 Loosen Allen bolt of Placid Arm with help of
Allen Key.
 Align the rope with the pulley of Placid Arm.
Placid Arm + Flycam Vest Setup

4
 Then insert the rope into Hook and e the
knot of Rope properly.
 Aach the spring to Hook and ghten the
knob to secure it properly.
 Secure the Placid on Flowline Arm with
provided e to ensure slip-free connecon.
 Now mount your camera setup on hook of
Flowline and ghten the knob to secure it
properly.

5
YOUR FLYCAM FLOWLINE WITH STABILIZING ARM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.