Flycam Swivel User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Swivel (SW-015-00)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable
copyright statutes or in wring by the Publisher.
Flycam swivel
Rod
Allen Key (4mm, 3/16mm, 3mm)
Bush
Ronin Adapter Plate

2
• Remove the end cap of the rod.
• Loosen the bolts of the Flycam swivel with
the help of a 4mm Allen key and insert the
rod.
• Aer ghtening the bolt, aach the end cap to
the rod. as shown in images.
• Tighten the bolt of the Flycam swivel with a
4mm Allen Key.
Swivel Setup
• Remove the bolt of the Flycam swivel by
loosening it with the help of a 3/16 mm Al-
len key.

3
• Remove the 4 X bolt, as shown in the image.
• Remove the screw bush by removing the
handlebar.
• Now separate the top part of the swivel.
• Remove all the screw bush as shown in the
image.
• Then place the handlebars one by one on
the Ronin plate.
• Place the top plate of the next Flycam swivel
on top, As shown in the image.

4
• Then insert the bolt and ghten it properly
with the help of a 4mm Allen key.
• Remove the handle and insert it into the
swivel.
• Loosen the knob of the DJI Ronin handle
(Not Included).
• Aer inserng into the swivel, insert the
handle.
• Remove the bolts from the top plate of the
Flycam swivel with the help of a 4mm Allen
Key.
DJI Ronin Gimbal (Not Included)
• Tighten the handle properly, as shown in the
image.

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
YOUR FLYCAM SWIVEL
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
• Insert the Flycam swivel by sliding it onto
the DJI Ronin gimbal (Not-Included). And
lock the gimbal with the locking lever of the
swivel plate.
• The Flycam swivel is now properly aached
with DJI Ronin Gimbal (Not-Included).