Flycam CMFT-AV User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Locking Buckles
Chest Plate
Comfort Vest
So Shoulder
Padding
Height Adjustment
Knob
Arm-Vest Connector
Comfort Arm
Spool Adapter
Box Packing
Small Bracket
Comfort Arm & Vest (CMFT-AV)
Assem b l y M a n u a l

2
 Aach back and front of Vest by clipping
shoulder buckles. Then Put-on the Vest and
aach chest buckles. Tighten the shoulder
Velcro straps to a snug posion.
 Tighten lower straps with help of Velcro on
back for a comfortable t and lock them with
buckles.
 Make Vest t as ght as possible. Doing so
provides maximum control over the stabilizer
system and makes for slip-free operaon.
Steadycam Arm & Vest Setup
 To compensate for the weight of camcorder
and stabilizer, an adjustable tension spring
knob is provided. Turn the knob clockwise to
set angle of arm at a desired fixed position
and anti-clockwise for taking smooth gliding
shots.
Arm Adjustment
 The length of chest plate can be adjusted
according to your height by using Adjustment
Knob.
 Insert Arm-Vest Connector into space
provided.
 The universal Arm mount requires no tools to
aach it to Vest. When assembling, just put it
into the mount, as shown. Now aach Spool
Adapter to Comfort Arm in order to mount
your Stabilizer onto it.
NOTE: Once the t of Vest feels comfortable, you can remove it by un-clipping the buckles and strap
from one side only. This makes it easy to remove and dress it back on, when needed.
NOTE: If you are using Steadycam Jr. or Glidecam Handheld Stabilizer, you will need to replace Spool
Adapter post.

3
Bearing Maintenance
If aer some period of me the bearings stop running smoothly as when new, you can oil it with light
lubricang oil. We recommend using only a few drops, anything more than a lile will end up dripping
from the bearing and onto the rest of your Comfort Arm. Be sure to keep the oil away from your camera,
and clean up any over-spill when done.
Cleaning
Do not use solvents or harsh cleaners of any kind on Comfort Arm & Vest. If the unit becomes dirty, use
only a cloth or sponge with water and a very mild detergent to gently rub the unit clean. Rinse well.
Storage
If you are going to store Flycam Comfort Arm & Vest for a long period of me, then we recommend
storing it up-right in a dry or low-to-normal humidity area.
If you are unable to nd an environment like this, then we suggest you store the unit in an airght plasc
container or bag. Keeping the unit upright helps to lessen stress on the system.
Maintenance
 Determine which end ts into boom of your
handle, insert adapter post into yoke, replace
retaining screws and ghten securely.
YOUR FLYCAM COMFORT ARM & VEST
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)

4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.