Flycam FLCM-PLA-EA User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Flowline Placid Extension Arm
(FLCM-PLA-EA)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manua l
Flowline Placid Extension Arm
2 x Screw (Sizes: 5/25”)
Allen Key (Size: 4mm)

2
 With the help of an Allen key, remove the
bottom screw of the owline placid two axis
spring arm (Not Included), as shown in the
image.
 Remove the bearing pulley from the Flowline
Placid Two Axis Spring Arm.
 Now remove the top screw with the help of
the Allen key.
 After properly matching the threads of the
Placid arm, insert the 5/25” screw and
properly tighten it with the 4mm Allen key.
NOTE: The Placid Arm has been built using high
-grade Aluminum Alloy & the Springs used in
the Placid are made up of Stainless Steel.
 Insert the Flowline Placid Extension Arm
Properly in the Flowline Placid Two Axis
Spring Arm, as shown in the image.
Flowline Placid Extension Arm Setup
 Properly insert the bush into the flowline
placid two axis spring arm, as shown in the
image.
Assembling of Flowline Placid Extension Arm

3
 Remove the screw with the help of the Allen
key
 Remove the bearing pulley of Flowline Placid
Extension Arm as shown in the image.
 Insert the bolt and properly tighten it with
the Allen key.
 Fold the rope over the bearing pulley and
insert it into the flowline extension arm.
NOTE: This gives the arm stability to handle
constant tension and stress placed on it.
 Repeat the same process for the second
screw.
NOTE: The minimum extension length is
56mm and the maximum is 116mm.

4
YOUR FLYCAM FLOWLINE PLACID EXTENSION ARM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.