Flycam DSLR Camvest User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assem bly Manual
Flycam DSLR Camvest
DSLR Camvest - Hands-Free Front & Rear Body
Camera Mount Harness (FLCM-CMVT-01)
Telescopic Arm

2
• Repeat the same process with the upper
buckle.
NOTE: You can stretch or loosen the adjustment
strap unl you feel comfortable.
• Adjust the buckle present on the other side
using the strap.
NOTE: It has built-in straps that can be loosened,
ghtened, buckled, or unbuckled to suit your
needs.
• Loosen and remove the knob of the Telescopic
Arm.
• Similarly, remove the second knob of the
Telescopic Arm.
Camvest Setup
• Adjust the buckle of the Camvest per your
requirement and aach it as shown in the
image.
• Loosen the center knob of the Telescopic Arm
and adjust the rod.
Telescopic Arm Assembly

3
• Loosen the front knob of the Telescopic Arm.
NOTE: Its 3 telescopic pole extension with 180°
tling capacity lets you capture footage for mul
-dimensional shots.
• The length of the arm can be extended by
loosening the knob.
• Mount your Camera (Not Included) on the ball
head present at the end of the pole.
NOTE: There is a ball head at the end of the pole
to allow Camera mounng for 180° low & high
angled shots.
• Aer mounng the Camera (Not Included),
secure it using the provided knob, as shown in
the image.
• Adjust the posioning of the Camera accord-
ing to your need and lock the posion with the
knob.
• The Camera is fully assembled.
NOTE: Camera (Not Included) can be posioned
in a POV angle or towards yourself, providing
superb third-person shots.
• Insert the Telescopic arm in the Camvest and
ghten the knob to secure it, as shown in the
image.

4
YOUR PROAIM DSLR CAMVEST - HANDS-FREE FRONT & REAR
BODY CAMERA MOUNT HARNESS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.