Flying Industry Development S1X-DC06 User manual

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart
.com
RFWireless Remote Control RadioController/ Transmitter& Receiver
PackageInclude:
1xReceiver: S1X-DC06 / S1X-DC09 / S1X-DC12/ S1X-DC24 (1 Channel/ Three ControlModes)
2xTransmitter: C-2
1xUser manual
Feature:
Wireless control,easy toinstall
Direct power output; controlLights, Motors, Fans,electricallyoperatedDoors/Locks/Windows/Blinds/Cars or Other Appliances.
You can turn on/off thereceiver withtransmitter(remotecontrol)fromanyplacewithinareliabledistance;the wirelessRFsignalcanpass
through walls, floorsand doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
Reliablecontrol: The transmitter (Encoding) and the receiver (Decoding) usean8-bitcode.
One/severaltransmitterscancontrolone/severalreceiverssimultaneously.
If you usetwoor more receiversinthe sameplace, you can setthemwithdifferentcodes.
Transmitting Frequency: 315MHz /433MHz
Receiver:
ModelNo.: S1X-DC06 / S1X-DC09/ S1X-DC12 / S1X-DC24
Channel: 1CH
ControlModes: Toggle, Momentary, Latched
Coding Type: Fixed code
Coding Setting:Bylearning
Power Supply(Operating Voltage): DC6V(S1X-DC06), DC12V 1V (S1X-DC12), DC9V 1V(S1X-DC09), DC24V 1V (S1X-DC24)
Output:DC6V (S1X-DC06), DC12V (S1X-DC12), DC9V (S1X-DC09), DC24V(S1X-DC24)
PCBSize:67mm x50mm x18mm
CaseSize: 75mm x54mm x27mm
StaticCurrent: ≤6mA
MaximumWorkingCurrent: 10A
Transmitter:
ModelNo.: C-2
Channel: 2CH
RemoteControlDistance: 100m/ 300ft (theoretically)
Encode:Fixed code by soldering
Unitsize: 58mm x39mm x16mm
Power Supply: 1x23A-12V battery(included,canbe usedfor 12months)
Usage:
Setting differentcontrolmodes (We havesetthereceiver asTogglemodebefore delivery.Ifyou want touseother modes,do asfollowing):
1) Setting controlmode Toggle:OnlyconnectJumper-2.
Press button 1:Turn on the relay,terminalA&BoutputDC power.
Press button 1again: Turn off therelay, terminalA&B nooutput.
2) Setting controlmode Momentary: Only connect Jumper-1.
Press and holdbutton 1:Turn on the relay, terminalA&BoutputDC power.
Releasebutton 1:Turn offthe relay, terminalA&Bno output.
3) Setting controlmode Latched: Do notconnectJumper-1 and Jumper-2.
Press button 1:Turn on the relay,terminalA&BoutputDC power.
Press button 2:Turn off the relay,terminalA&Bno output.
Wehavelearned remotecontroltothe receiver. If you don’t wantthe receiver towork withtheremotecontrol, you can deleteallcodesofremote
controls,whichare stored inthe receiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.
Learning the button ofremotecontrol:
1) Pressthe button of receiver;signalLEDonthe receiver keepsshining.Thereceiver enters intostatus ofLEARNING.
2) Press anyone buttonon remotecontrol.IfsignalLEDflashesquickly15 times and turnsoff,it means learning issuccessful.
3) Whenreceiver is inthestatus of LEARNING, pressagainthe button of receiver, signalLEDturns off, learning process will be discontinued.
4) The receiver can learn severalremotecontrols withdifferent codes.

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart
.com
Application Circuit
Powersupply
Lamp
_
+
Relay
A B C
Jumper-2
Jumper-1
Button
SignalLED
PowerLED
Antenna
RFmodule
IC
Beeper
+
_