Flying Industry Development S4C-DC06 User manual

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.comE
-
Mail:sal
e@
carymart
.com
RFWireless Remote Control RadioController/ Transmitter& Receiver
PackageInclude:
1xReceiver: S4C-DC06 / S4C-DC09 / S4C-DC12 / S4C-DC24 (4 Channel/ FourControlModes)
2xTransmitter: C-4L
1xUser manual
Feature:
Wireless control,easy toinstall
ControlLights,Motors,Fans, electricallyoperated Doors/Locks/Windows/Blinds/Cars or OtherAppliances withAC110~240Vor DC0~28V.
You can turn on/off thereceiver withtransmitter(remotecontrol)fromanyplacewithinareliabledistance;the wirelessRFsignalcanpass
through walls, floorsand doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
More reliablethan fixed code;the transmitter useEV1527 Learning code,whichisup to1million codes,reducing code collision and unauthorized
code scanning possibilities.
One/severaltransmitterscan controlone/severalreceiverssimultaneously.
Twoor more transmitter&receiverssetcanbe used inthe sameplace.
Transmitting Frequency: 315MHz /433MHz
Receiver:
ModelNo.: S4C-DC06 / S4C-DC09 / S4C-DC12 / S4C-DC24
Channel: 4CH
ControlModes: Latched, Momentary,Toggle, Momentary+Toggle
Coding Type: Fixed code or Learning code
Coding Setting:Bylearning
Power Supply(Operating Voltage): DC6V(S4C-DC06), DC12V 1V (S4C-DC12), DC9V 1V(S4C-DC09), DC24V 1V (S4C-DC24)
Working Voltage Range of Relay:AC110~240V or DC0~28V
PCBsize:68mm x48mm x20mm
Casesize: 75mm x55mm x30mm
StaticCurrent: ≤6mA
MaximumPower: 5A/ eachchannel
Transmitter:
ModelNo.: C-4L
Channel: 4CH
RemoteControlDistance: 100m/ 300ft (theoretically)
Encode:EV1527 Learning code (upto1million codes, reducing code collisionand unauthorized code scanningpossibilities.)
Unitsize: 58mm x39mm x16mm
Power Supply: 1x23A-12V battery(included,canbe usedfor 12months)
Usage:
Setting differentcontrolmodes(We havesetthe receiver asTogglecontrolmode before delivery.Ifyou wanttouseother controlmodes,do as
following operation):
Setting controlmode Latched:Disconnect Jumper-1 and Jumper-2.
Controlmode Latched (Channel1~4): Press->On, other relays Off; Press otherbutton->Off.
Suchas:
Press button 1:Turn on relay1(connect B andC, disconnectAand B)
Turn off other relays (disconnectB and C,connect Aand B)
Press button 2:Turn on relay2(connect B andC, disconnectAand B)
Turn off other relays (disconnectB and C,connect Aand B)
Setting controlmode Momentary:OnlyconnectJumper-1.
Controlmode Momentary(Channel1~4):Press andhold->On; Release->Off.
Suchas:
Press and holdbutton 1:Turn on relay1(connectB andC, disconnectAand B)
Releasebutton 1:Turn off relay1(disconnectBand C,connect AandB)
Press and holdbutton 2:Turn on relay2(connectB andC, disconnectAand B)
Releasebutton 2:Turn off relay2(disconnectBand C,connect AandB)
Setting controlmode Toggle:Only connect Jumper-2.
Controlmode Toggle(Channel1~4): Press->On;Press again->Off.
Suchas:
Press button 1:Turn on relay1(connect B andC, disconnectAand B)
Press button 1again: Turn off relay1(disconnectB and C,connectAand B)
Press button 2:Turn on relay2(connect B andC, disconnectAand B)
Press button 2again: Turn off relay2(disconnectB and C,connectAand B)

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.comE
-
Mail:sal
e@
carymart
.com
Setting controlmode Momentary+Toggle: ConnectJumper-1 and Jumper-2.
Controlmode Momentary(Channel1, 2):Press and hold->On; Release->Off.
Press and holdbutton 1:Turn on relay1(connectB andC, disconnectAand B)
Releasebutton 1:Turn off relay1(disconnectBand C,connect AandB)
Press and holdbutton 2:Turn on relay2(connectB andC, disconnectAand B)
Releasebutton 2:Turn off relay2(disconnectBand C,connect AandB)
Controlmode Toggle(Channel3,4): Press->On;Press again->Off.
Press button 3:Turn on relay3(connect B andC, disconnectAand B)
Press button 3again: Turn off relay3(disconnectB and C,connectAand B)
Press button 4:Turn on relay4(connect B andC, disconnectAand B)
Press button 4again: Turn off relay4(disconnectB and C,connectAand B)
Wehavelearned remotecontroltothe receiver. If you don’t wantthe receiver towork withtheremotecontrol, you can deleteallcodesofremote
controls,whichare stored inthe receiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.
Learning the button ofremotecontrol:
1) Pressthe button of receiver;signalLEDonthe receiver keepsshining.Thereceiver enters intostatus ofLEARNING.
2) Press anyone buttonon remotecontrol.IfsignalLEDflashesquickly15 times and turnsoff,it means learning issuccessful.
3) Whenreceiver is inthestatus of LEARNING, pressagainthe button of receiver, signalLEDturns off, learning process will be discontinued.
4) The receiver can learn severalremotecontrols withdifferent codes.
DC0~28V /
AC110~240V
A, B=NormallyClosed;B,C=NormallyOpen.
Application Circuit
PowerSupply
Button
Antenna
RFmodule
IC
LED
Relay4
Relay3
Relay1
Relay2
C
B
A
_
+
C
B
A
C B
A
C B
A
Jumper-1 Jumper-2
Lamp1
Lamp2
Lamp3
Lamp4
M
M
M
M
_
+
Application: ForDC12Vmotororlamp
PowerSupply:DC12V
Motor 1
Motor 2
Motor 3
Motor 4
Button
Antenna
RFmodule
IC
LED
Relay4 Relay3
Relay1
Relay2
C B
A
C B
A
Jumper-1 Jumper-2
C
B
A
_
+
C
B
A