Fomei RGB 200F LED User manual

Continuous light
LED RGB 200F FY3630
USER GUIDE

WWW.FOMEI.COM
Welcome to the FOMEI family!
Before rst use, read this manual rst.
If you have any questions, fell free to contact us:
E-mail: [email protected]om
Website: www.fomei.com
Warning before use:
1. Make sure that the product is intact and that there are no missing parts.
2. In case of damage, contact a professional service FOMEI.
3. Keep the environment dry and ventilated when using the product.
4. For the best performance of the product, keep the product clean by clean.
5. Do not scratch or apply pressure to the product.
Safety warning:
1. Keep this product out of reach the rain or humidity to avoid damage or injury.
2. Do not disassemble the product. In case of damage contact a service FOMEI or contractual
service with trained professionals.
3. If the product is disassembled, you will not be covered under warranty.
4. Do not use the product in extreme temperatures (+ 50C).
5. The product is not suitable for children.
6. Do not plug/unplug when the power is still connected.
7. Do not burden light more than necessary
RECYCLING
This product contains electronic parts. Do not throw it into the rubbish bin, take it to the
electronic recyclation facility. Please, protect our planet.

WWW.FOMEI.COM
TABLE OF CONTENT
A. ABOUT PRODUCT
B. PRODUCT OVERVIEW
C. APP CONNECT
D. MODES
E. DMX-512 SETTINGS
F. TECHNICAL SPECIFICATIONS

WWW.FOMEI.COM
B. PRODUCT OVERVIEW
A. ABOUT PRODUCT
The RGB 200F LED light was directly created for the most demanding creators. The main
advantages are RGB mode, ROSCO / LEE lters presets, a wide range of bi-color mode (2800-
10000K) or user-denable movie eects. All this with the possibility of control via the Desal
SIK mobile application or the DMX512 protocol.
1. Fresnell lens
2. Barndoors
3. U-bracket
4. USB service ports
5. Handle
6. OLED display
7. LED indicators
8. Control buttons
9. Light angle knob
10. ON/OFF
11. Powercord
12. Power output
13. 48V power input
14. DMX in/out
456789
10
11 12 13 14
2
1
3

WWW.FOMEI.COM
C. APP CONNECTION
1. Download Desal SIK app
2. Open app and click Bluetooth symbol
3. Press „CONNECT“
4. Choose light you want to connect
5. For group control press „GROUP CONTROL“
6. In the light menu, assign the address of the light you
want to control in the group.
7. It is not possible to use the eect mode in group
mode.
D. MODES
BI-COLOR MODE
The RGB 200F LED has ve main modes: bi-color, HSI, RGB, color lters and eect
mode. To select a mode, press the MENU button, use the up and down arrows to se-
lect the desired mode and conrm by pressing the ENTER button.
MENU ENTER
Up Down
• You can control the color temperature of the light in the range of 2800K - 10,000K.
• At the same time it is possible to regulate the color deviation in the green and
magenta channels.
• The display shows the coordinates CIE1931xy.

WWW.FOMEI.COM
RGB MODE
• In RGB mode, you can adjust each color from 0-255.
• CIE 1931 coordinates are displayed above RGB values.
• Adjust the red color with the rotary selector R.
• Adjust the green color with the rotary selector G.
• Adjust the blue color with the rotary selector B.
HSI MODE
• In HSI mode, you can adjust hue (0-360), saturation (0-100) and intensity (0-100).
• The CIE 1931 coordinates are shown at the top of the display.
• Adjust the color shade with the rotary selector H.
• Adjust the color saturation with the rotary selector S.
• Adjust the light intensity with the rotary selector I.
ROSCO/LEE FILTER MODE
• The 200F has simulations of the 20 most used ROSCO lters and the 20 most used
LEE lters.
• It is possible to regulate the intensity of each lter.

WWW.FOMEI.COM
EFFECTS
• The 200F allows eight eect modes: police car, ash, candle light, yellow ash,
blue ash, green ash, HSI demo and bi-color demo.
• You can adjust the speed of the eect with the „speed“ dial.
• You can adjust the intensity (0-100) with the „intensity“ rotary selector
SETTINGS
• In the settings, you can set, among other things, the parameters of the remote
control.
• DMX 512 Addr: Here you can set the DMX start address.
• Wireless Addr: Here you can set the address for control via BT (0-16).
• Freq Select: Currently unavailable function ready for future update.
• Language: Language selection (English / Chinese)
Language settings Device info

WWW.FOMEI.COM
E. DMX-512 SETTINGS
The RGB 200F LED light needs eight DMX channels for its function.
• Channel 1: Intensity
• Channel 2: Color temperature
• Channel 3: Tuning the green / magenta tint
• Channel 4: Splitter between RGB and bi-color. Enable channel 4. for the RGB cont-
rol option while leaving the intensity at a value other than zero.
• Channel 5: Red saturation
• Channel 6: Saturation green
• Channel 7: Blue saturation
G. TECHNICAL SPECS
Power 200 W
LUX 5600K: 1m (8040)/ 3m (953) 5m (397)/ 7m (227)/ 9m (132)
2800K: 1m(6960)/ 3m (833) 5m (344)/ 7m(196)/ 9m(114)
CCT 2800 K - 10 000 K
VOltage 100 - 240 V, 60Hz/50Hz
Dimensions (W x L
x H)
56 x 26 x 25 cm
Weight 7,6 kg
CRI 96

WWW.FOMEI.COM

FOMEI s.r.o.
Machkova 587
500 11 Hradec Králové
[email protected]om
www.fomei.com
FOMEI Servis
Tel.: [phone]
E-mail: [email protected]