Fomei LED RING SMD 23W User manual

LED RING SMD 23W
RING –LED LIGHT

Thank you for purchasing FOMEI’products.
Please read this user manual carefully before using this product.
E-mail: [email protected]om
Website: www.fomei.com
Warning before use:
1. Make sure that the product is intact and that there are no missing parts.
2. In case of damage, contact a professional service FOMEI.
3. Keep the environment dry and ventilated when using the product.
4. For the best performance of the product, keep the product clean by clean.
5. Do not scratch or apply pressure to the product.
6. For long battery life is needed at least once a month to charge it.
Safety warning:
1. Keep this product out of reach the rain or humidity to avoid damage or injury.
2. Do not disassemble the product. In case of damage contact a service FOMEI or contractual
service with trained professionals.
3. In the event that the product is disassembled, you will not be covered under warranty.
4. Do not use the product in extreme temperatures (+ 50C).
5. The product is not suitable for children.
6. Do not exceed the maximum load of light.

A) Product overview
1. Battery lock
2. Battery holder
3. Camera fixing knob
4. Bracket fixing knob
5. Camera bracket
6. 4 quarters ON/OFF switch
7. Dimming knob
8. Color temperature knob
9. Power indicator
10. Power switch
11. DC power jack

B) About product
The LED RING light series is designed to generate better eyes light with the circular shape to enable a
better fill off lighting on object for portrait photography or video production. It is equipped with a
diffuser for softening the light, which can reduce the reflection of light to allow the best shot. The
DVR series are equipped with 4 –quarters ON / OFF switch and a battery life of 50,000 hours.
First start:
1. Please install the camera bracket with bracket adjustment
knob. Then fix the light on the stand.
2. Fix the camera to the bracket and tighten the fixing knob.
3. Make sure the power switch is OFF before connecting the power cable or batteries.
4. Connected with power cable or batteries before turn on the light.
5. Switch to “BATTERY” if you’re using batteries and switch to “CABLE” if using AC adapter. Turn
off the light by switching the power button to “OFF”.

6. After turn on the light, you can control the dimming via dimming knob („DIMMER“). Twist
the knob down from 0% and up to 100% of brightness.
7. Controlling the color temperature via color temperature knob. Twist the knob down from
3000K and up to 5600K of color temperature.
8. Press and hold the battery lock („yellow bottom“) to
release the battery.

C) 4 quarters ON/OFF switch instruction
1. One quarter switch ON
2. Two quarters switch ON
3. Three quarters switch ON
4. All quarters switch ON

D) Specifications
Model number
LED RING SMD 23W
LED diodes
112pcs x 0,2W
Power
23W
Color temperature
3000K - 5600K
Voltage
DC –9V 3A
Compatibility
AC adaptor Sony F Mount Battery x2
CRI
95
LUX (0,5m/1m/2m)
0,5m (861)/1m (241)/2m (66,2)
Foot-candles
0,5m (80)/1m (22)/2m (6,2)
Dimensions
38 x 25,5 x 5cm
Weight
0,9kg
In the box
AC Adaptor, camera bracket and bag
Optional accessories
Sony F Mount Battery,
Light stand: I-2501/I-2601,
Battery charger: SP-CHG