Fomei LED LIGHT LCD 14W User manual

LED LIGHT LCD 14W
LIGHT PANEL

Thank you for purchasing FOMEI’products.
Please read this user manual carefully before using this product.
E-mail: [email protected]om
Website: www.fomei.com
Warning before use:
1. Make sure that the product is intact and that there are no missing parts.
2. In case of damage, contact a professional service FOMEI.
3. Keep the environment dry and ventilated when using the product.
4. For the best performance of the product, keep the product clean by clean.
5. Do not scratch or apply pressure to the product.
6. For long battery life is needed at least once a month to charge it.
Safety warning:
1. Keep this product out of reach the rain or humidity to avoid damage or injury.
2. Do not disassemble the product. In case of damage contact a service FOMEI or contractual
service with trained professionals.
3. In the event that the product is disassembled, you will not be covered under warranty.
4. For the best performance of product, keep LED diodes clean softly by clean.
5. Only use batteries specified for this product.
6. Do not use the product in extreme temperatures (+ 50C).
7. The product is not suitable for children.
8. Make sure the power is off after use.
9. Do not burden light more than necessary.

A) Product overview
1. LED beads
2. Light body
3. Color temperature display
4. Mutual control channel
5. Color temperature adjustment
6. Power switch
7. DC power jack
8. Battery socket
9. Channel display
10. Battery status
11. Brightness display
12. Brightness adjustment
13. Battery lock
14. 1/4 female thread

B) About product
LED light LCD is the new LED panel which is small, high power and lightweight. This LED panel is made
of lightweight plastic. The users can use SONY F-batteries or power cable. The advantages of this light
is high CRI, powerful and energy save. The users will certainly appreciate touchscreen LCD display
where can adjust the color temperature and brightness.
First start:
1. This light offers two options of power supply –AC adapter or SONY F-batteries. Before
connecting the power cable or installing the battery, please check if the switch is in „Off“
position.
2. Switch on the light and adjust to the required settings.
3. LCD display shows the current color temperature and brightness. The color temperature
range is 3000K - 8000K.
4. The power output is from 0 - 100%
5. It reaches maximum power output in 5500K and 100%.
6. There are 4 channels for users to set up mutual control networks: A, B, C and D. The lights in
the same channel can be controlled via 1 light.
Battery installation:
Put the battery directly into the holder. Uninstall the battery by pressing the battery lock after use.
C) Specifications
The above LUX figure is recorded under ISO: 640.
Model number
LED LIGHT LCD 14W
LED diodes
240pcs
Power
14W
Color temperature
3000K - 8000K
LUX
1m (3200)/0,5m (12000)
Voltage
9V 3A
CRI
95
Dimensions
20 x 13,5 x 3cm
Weight
0,35kg