Fomei FY3566 User manual

CONTINUOUS LIGHT
LED ROLL 18W
NÁVOD K POUŽITÍ
FY3566

WWW.FOMEI.COM
ROLL LED 18W
Welcome to the Fomei products
owners family!
Before first use, read this manual first.
If you have any questions, fell free to contact us:
E-mail: [email protected]
Website: www.fomei.com
Warning before use:
1. Make sure that the product is intact and that there are no missing parts.
2. In case of damage, contact a professional service FOMEI.
3. Keep the environment dry and ventilated when using the product.
4. For the best performance of the product, keep the product clean by clean.
5. Do not scratch or apply pressure to the product.
Safety warning:
1. Keep this product out of reach the rain or humidity to avoid damage or injury.
2. Do not disassemble the product. In case of damage contact a service FOMEI or contractual
service with trained professionals.
3. If the product is disassembled, you will not be covered under warranty.
4. Do not use the product in extreme temperatures (+ 50C).
5. The product is not suitable for children.
6. Do not plug/unplug when the power is still connected.
7. Do not burden light more than necessary.
RECYCLING
This product contains electronic parts. Do not throw it into the rubbish bin, take it to the electro-
nic recyclation facility. Please, protect our planet.

WWW.FOMEI.COM
ROLL LED 18W
TABLE OF CONTENT
A. PRODUCT OVERVIEW
B. ABOUT PRODUCT
C. FIRST STEPS WITH PRODUCT
D. TECHNICAL INFORMATIONS
E. OTHER FOMEI PRODUCTS

WWW.FOMEI.COM
ROLL LED 18W
4. Battery lock
5. Dimmer
6. Battery slot
7. Stand mount
8. ON/OFF button
9. AC plug
10. Stand/Hotshoe mount
A. PRODUCT OVERVIEW
1. Velcro
2. Control unit
3. Stand/Hotshoe mount
1.
2.
3.
5.
8.
4.
6.
9.
7.
10.

WWW.FOMEI.COM
ROLL LED 18W
B. ABOUT PRODUCT
Flexible, small and easy to carry LED light FOMEI ROLL is an excellent alternative for classic
small desk lights. It is possible to bend the panel for maximum customization of final light
scene. This light supports Sony NP-F batteries.
Package contains:
light FOMEI ROLL LED 18W
AC adaptor
Hotshoe mount/holder
Does not contain battery.
Accessories we recommend to buy:
2x FY4325 NP-750 Battery / 2x FY3573 NP-960 Battery
FY4324 Charger for NP-750/NP-960 Battery
C. FIRST STEPS
Battery installation
Insert the batery into the holder. If you hear „click“, battery is fixed in position. For battery remo-
val, press the battery lock and remove the battery from holder.
ON/OFF
Before turning it on, be sure that the light is o. Conect power adapter/battery.
If you want to turn it on, switch to “ON“. For power o switch to the „OFF“ position.
Dimmer
You can set the power using the dimmer knob (5.)-0-100%.