Force USA F-TRAPBAR-01 User manual

OWNER’S MANUAL F-TRAPBAR-01

ASSEMBLY MANUAL
BEFORE YOU START
Remove all parts from the packaging and separate and count each various component to ensure
everything has been correctly provided.
Follow the instructions and consult both the individual assembly pages and the overall expanded views
of the equipment.
It is the owner’s responsibility to ensure that all users of this unit have read the owner’s manual and are
familiar with the safety precautions.
SAFETY PRECAUTIONS
equipment.
Stop immediately if you experience any pain, dizziness or nausea. See a doctor at once.
PLEASE NOTE: Descriptions of pieces as LEFT and RIGHT are from the point of view of standing behind the
equipment facing towards the front.
BEFORE STARTING ANY EXERCISE PROGRAM, CONSULT YOUR DOCTOR. ESPECIALLY IF YOU ARE
OVER THE AGE OF 35 OR HAVE PRE-EXISTING HEALTH PROBLEMS.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING OR USING ANY FITNESS EQUIPMENT.
FORCE USA FITNESS EQUIPMENT ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR
PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
1

IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembling the Equipment: Adjustable Wrench and Allen Wrench.
NOTE: It is strongly recommended that this equipment is assembled by two or more
people to avoid possible injury.
Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to
be assembled. Attach washer only to end of the Carriage Bolt.
Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need
to be assembled.
Always wait until all bolts are assembled onto the equipment before tightening the bolts. Do
not tighten each bolt right after it is installed.
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
2

PARTS LIST
NOTE: SOME PARTS MAY COME PRE ASSEMBLED, IN WHICH CASE CONTINUE ONTO
THE NEXT REQUIRED STEP OF ASSEMBLY
3
KEY NO. PART DESCRIPTION SPEC Q'TY
1 Main Frame 1
2 Han le-axle 5
3 Han le Grip 5
4 Weight Post 2
5 Top L-plate 130×66×70×6 2
6 Left L-plate 150×66×195×6 2
7 Right L-plate 150×66×195×6 2
8 Olympic Sleeve 2
9 Plastic Foot 162×82×56 2
10 Bushing φ50×φ16×32 10
11 Rubber Bumper 100×60×48×50 1
12 Rubber Bumper φ62×φ24.5×25 2
13 Allen Bolt M12×25 2
14 Allen Bolt M12×110 4
15 Allen Bolt M10×7512
16 Allen Bolt M10×25 12
17 Allen Bolt M8×35 2
18 Washer 12 10
19 Washer 10 34
20 Washer 8 2
21 Spring Washer 10 12
22 Aircraft Nut M12 4
23 Cover Nut M10 12
24 Spring Clip φ47 2
Allen Wrench(Tool) 10# 1
Allen Wrench(Tool) 8# 2

4
1740
1740mm×725mm×250mm
250
725

• •
5

• •
6

• •
7

• •
8

• •
9

10
16
19
10 5
2
31
16 19 15
15 19
10 7
19
19 11
20
17 19 10
16 53
621
13
12 18 23 19
216
7
810
24 22
18
6
9
16 414 18

LIFETIME WARRANTY ON FRAME
2 YEAR WARRANTY ON MOVING PARTS (Such as Wheels)
Force USA, the Trusted Name in Strength Equipment™ was designed to be the best
value strength equipment for home use and proudly set the benchmark for our home use
equipment around the world. Offering one of the best warranties on the market for your
peace of mind, each piece of Force USA strength equipment is hand crafted for quality
and we use state-of-the-art production methods for our entire range. The Force USA
range of strength equipment carries a Lifetime Structural Warranty along with 2 years
cover on all cables and pulleys. This warranty applies to first owners and does not cover
second hand equipment or re-sold equipment. This Force USA warranty covers only
failures due to defects in structural, cables and pulleys and workmanship that occur
during normal home use. It will not cover damage that occurs in transport/delivery or
failure due to misuse, abuse, neglect, mis-application, alteration or improper assembly of
the product. This warranty does not cover the use or failure of equipment in studio
commercial applications. The replacement or repair provided for under the Force USA
warranty is the responsibility of the user and the customer will be responsible for any
freight charges applicable. Force USA will not be liable for any consequential damages
or for breach of any implied warranty on the range of Force USA strength equipment.
Force USA reserves the right to provide reconditioned parts and/or to request a return
and repair existing defective parts on the Force USA product.
VorTex by Force USA is a commercial grade upholstery used for all Force USA
equipment. We use a high grade commercial vinyl with rip-stop mesh backing which
helps prevent rips and tears. Force USA, the Trusted Name in Strength Equipment™ was
designed to be the best value strength equipment for home use and proudly set the
benchmark for our home use equipment around the world.
11