
6
Assembly Instructions
Step 7: Assembly completed.
Lighting Instruction
1. Open the screen door using the fire tool, put the firewood/charcoal on the grate. Do not
overload this fire pit.
2. Put dry wood scraps under firewood/charcoal, light them. Close the screen.
3. Put fire out!! Make sure the fire is completely out before you leave.
4. Make sure the fire is completely out before you clean the fire bowl.
5. Care, maintain and clean this fire pit.
Inspecting
This fire pit should be inspected on a regular basis to ensure product safety and longer product life.
DO NOT attempt to inspect this fire pit until the fire is COMPLETELY out and cooled down.
1. Check components for any signs of damage or rust.
2. If damage to any component is detected, do not operate until repairs are made.
Cleaning
This fire pit should be cleaned on a regular basis to promote safer experiences and longer product
life.
Note: After repeated use, a slight discoloration of the finish may occur.
DO NOT attempt to clean this fire pit until the fire is COMPLETELY out and cool down.
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
DO NOT clean any part of this fire pit in a self-cleaning oven as it may damage its finish.
1. Wipe exterior surface with a mild dishwashing detergent or baking soda.
2. Store this fire pit in a dry location to maximize product life.
3. Clean with water.
Storing
DO NOT move or store this fire pit until the fire COMPLETELY out and cooled down.
1.Once the fire is out (fire pit is cool to the touch), remove ashes and properly dispose.
4. Cover outdoor fire pit with the PVC cover (Not included).
2. Store this fire pit in a dry location to maximize product life.
3. Store assembled in a location away from children and pets.
Safety Instruction
Care and Maintenance