Freund FE-IPDS-23P User manual

1
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
FE-IPDS-23P
SIP Door Phone User Manual
FW. 26.208.2.4

2
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Content
Product Description ...........................................................................................3
Features ...........................................................................................................4
Panel Description...............................................................................................6
Unpacking ........................................................................................................7
Installation .......................................................................................................7
Configuration...........................................................................................................9
Web login .......................................................................................................10
Obtaining IP address .................................................................................10
Login the web...........................................................................................10
Status-Basic....................................................................................................10
Intercom-Basic................................................................................................12
Advanced Setting ............................................................................................13
Intercom-LED Setting.......................................................................................14
To setup the LED lighting mode. .......................................................................14
Intercom- Relay & Input...................................................................................15
Action ............................................................................................................17
Account-Basic .................................................................................................18
Account-Advanced ...........................................................................................20
Network-Basic .................................................................................................24
Network-Advanced...........................................................................................25
Phone-Time/Language .....................................................................................27
Phone-Call Feature ..........................................................................................27
Phone-Voice....................................................................................................29
Multicast.........................................................................................................29
Call Log..........................................................................................................30
Upgrade-Basic.................................................................................................31
Upgrade-Advanced ..........................................................................................33
Security-Basic .................................................................................................35

3
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Overview
Product Description
Freund IPDS-23P is a SIP-compliant handsfree audio outdoor phone. It can be
connected to Freund Integra SIP-Server for remote unlock, control and
monitor. It can communicate with Freund Integra indoors terminals (Integra-
7P) and Freund Bell Smartphone APP via voice and unlock the door or refuse
call.

4
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Features
➢Highlight
Vandal resistant body, with a flush button
POE (IEEE802.3af, Power-over-Ethernet)
Two-way audio communication over IP network with Echo cancel feature
Complies with SIP Standard
➢Physical & Power
Body material: all-aluminum
Button: 1 call button
Infrared Sensor: optional
RF Card Reader: optional
Output Relay: 2 output relays for door opener
802.3af Power-Over-Ethernet
12V DC connector (if not using POE)
Power consumption: less than 12w
Water proof & Dust proof: IP65
Installation: Wall-mounted
Dimension: 190x110x35mm
➢SIP Endpoint
SIP v1(RFC2543), SIP v2(RFC3261)
Audio codecs: G.711a, G.711μ, G.722, G.729
Speech Quality: 7kHz Audio
Echo Cancellation
Voice Activation Detection 
Comfort Noise Generator 

5
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
➢Door Entry Feature
Relay control individually by DTMF tones
➢Network Features
1x10/100Mbps Ethernet Port
Protocols support: IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTP, TCP,
UDP, ICMP, DHCP, ARP

6
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Panel Description

7
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Unpacking
Name
Quantity
IPDS-26VP
1
Back cover
1
Wall bracket
1
Cable buckle
1
M4X20 screw
2
ST4x20 screw
4
Screw fixing seat
4
M3X5 screw
4
M3X10 screw
1
Installation
With 86 embedded box:
Use 2 M4X20
screws to fix the
wall bracket and
Embedded box.
Use the pen to
mark the hole
location on the
wall bracket
Take down the
M4 screws and
remove the
wall bracket
Use 6mm Drill to
drill the red hole
you marked before
Insert the
screw fixing
seat into
the hole
Use 4 St4 screws
and 2 M4 screws
to fix the wall
bracket

8
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Without 86 embedded box:
Mark the red
hole of the
bracket in the
wall via using
pen
Use 6mm Drill to drill
the red hole you
marked before, and dig
a 5cm depth square
hole
Insert the
screw fixing
seat into
the hole
Use 4 ST4
screws to
fix the wall
bracket

9
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Back cover installation:
Configuration
Take down the
back cover, cable
buckle and
sealing ring
Make cables go through all
the components of the
bottom hole of the back
cover, connect with the
contacts in the main board.
Then put the cable buckle
and sealing ring into the
back cover.
Use 4 M3x5 screws to
fix the back cover
Place IPDS-26V
into the wall
bracket hole. Push
down so that the
device is fixed
securely. Lock the
M3X10 screws at
the bottom of
device.

10
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Web login
Obtaining IP address
IPDS-23P uses Static IP by default, and the default IP address is
192.168.1.100.
If the IP address is unknown, after power on, when you see the LED light
turns Blue, press the call button about 5s, the phone will announce its IP.
Login the web
Open a Web Browser, enter the corresponding IP address. Then, type the
default user name and password to log in. The default User Name and
Password are as below:
User name: admin
Password: admin
Status-Basic

11
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Status, including product information, network information and Account
information, can be viewed from Status -> Basic.
Sections
Description
Product Information
To display the device’s information such as Model name,
MAC address (IP device’s physical address), Firmware
version and Hardware firmware.
Network Information
To display the device’s Networking status (LAN
Port),such as Port Type(which could be
DHCP/Static/PPPoE), Link Status, IP Address, Subnet
Mask, Gateway, Primary DNS server, Secondary DNS
server, Primary NTP server and Secondary NTP
server(NTP server is used to synchronize time from
INTERNET automatically).
Account Information
To display device’s Account information and Registration
status (account username, registered server’s address,
Register result).

12
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Intercom-Basic
Go to the path: Intercom-Basic
Sections
Description
Basic
Select Account: IPDS-26V supports 2 accounts. You
can choose one account or Auto mode for the
following Intercom basic settings.
No Answer Call：IPDS-26V will call to the No
answer call number in order when the ringtone is
time out without answer of the push button
number. Disable by default.
Push Button
Push Button: To configure the destination number
or IP you want to contact with.
No Answer Call 1&2: To setup two no anser call
numbers or one no answer call number.
Web Call
To dial out or answer the phone from website.
Max Call Time
To configure the max call time
Max Dial Time
Dial in Time: When other phone calls to IPDS-26V,
if ring tone is over the Dial in TIme without answer.

13
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
The call will be hang up.
Dial out Time: When IPDS-26V calls to the other
party, if the ringtone is over the Dial out Time
without answer. IPDS-26V will continue calls to no
answer call number in order.
Push to Hang up
To enable or disable the Push to Hang up function
Advanced Setting

14
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Intercom-LED Setting
To setup the LED lighting mode.
Sections
Description
State
There is five states: Normal,Offline,Calling,Talking and
Receiving.
Color Off
The default status is OFF.
Color On
It can support three color: Red, Green, Blue.
Blink Mode
To setup the different blink frequency.

15
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Intercom- Relay & Input
Sections
Description
Relay
To configure some settings about unlock
Relay Select: IPDS-26VP supports 2 relays
Relay Type: Different locks use different relay types,
positive or negative. If you connect the Lock in NO
connector, select positive type. Otherwise using
negative type.
Relay Delay(sec): Allows door remain “open”for
certain period. Range is from 1 to 10 seconds
DTMF Option: IPDS-26V supports 1 digit or 4 digits
DTMF unlock code. Please select one type and enter
the corresponding code.
DTMF: Setup 1 digit DTMF code for remote unlock
4 Digits DTMF: Setup 4 digits DTMF code for remote
unlock.

16
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Status: Different relay types will show different
status.
Web relay
IPDS-26V can support extra web relay. This function is
more safety to use DTMF code to remote unlock.
Type: Connect web relay and choose the type.
IP Address: Enter web relay IP address.
User name: it is an authentication for connecting
web relay
password: it is an authentication for connecting
web relay
Note: Users can modify username and password in web
relay website.
Input
There is a sensor that used to anti vandal in IPDS-26V.
When IPDS-26V is broken by violent means. The sensor
will be triggered, then management center will receive
the alarm.
Service: Enable by default
Call Number: To setup management center number
for alarm.
Display Name: Which is sent to the other call party
for displaying

17
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Action

18
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Account-Basic
Sections
Description
SIP Account
To display and configure the specific Account settings.
Status: To display register result.
Display Name: Which is sent to the other call party
for display.
Register Name: Allocated by SIP server provider,
used for authentication.
User Name: Allocated by your SIP server provide,
used for authentication.
Password: Used for authorization.
SIP Server 1
To display and configure Primary SIP server settings.
Server IP: SIP server address, it could be an URL or
IP address.

19
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Registration Period: The registration will expire after
Registration period, the IP phone will re-register
automatically within registration period.
SIP Server 2
To display and configure Secondary SIP server settings.
This is for redundancy, if registering to Primary SIP
server fails, the IP phone will go to Secondary SIP
server for registering.
Note: Secondary SIP server is used for redundancy, it
can be left blank if there is not redundancy SIP server in
user’s environment.
Outbound Proxy
Server
To display and configure Outbound Proxy server
settings.
An outbound proxy server is used to receive all initiating
request messages and route them to the designated SIP
server.
Note: If configured, all SIP request messages from the
IP phone will be sent to the outbound proxy server
forcefully.
Transport Type
To display and configure Transport type for SIP message
UDP: UDP is an unreliable but very efficient
transport layer protocol.
TCP: Reliable but less-efficient transport layer
protocol.
TLS: Secured and Reliable transport layer protocol.
DNS-SRV: A DNS RR for specifying the location of
services.
NAT
To display and configure NAT (Net Address Translator)
settings.
STUN: Short for Simple Traversal of UDP over NATS,
a solution to solve NAT issues.
Note: By default, NAT is disabled.

20
FREUND ELEKTRONIK A/S
Fuglebakken 119 | 5210 Odense NV
www.freund.dk | Tel. [phone]
Account-Advanced