Friedrich Hazardgard SH15L30 User manual

Hazardgard®
Hazardous Duty Room Air Conditioners
PURCHASER P.O. # DATE
PROJECT LOCATION
ENGINEER ARCHITECT
SUBMITTED BY FOR APPROVAL FOR REFERENCE
ITEM PLAN DESIGNATION QUANTITY COOLING BTU/H VOLTAGE FRIEDRICH MODEL
HAZARDGARD_SUBMITTAL_08
FEATURES
Direct wire connection
Utilizes direct-wired, 15-amp circuit with time-delay fuse
Hermetically sealed reciprocating compressor
20 gauge steel cabinet
Larger, commercial grade fan motor with hermetically
sealed overload for arc-free operation.
Diamonblue Technology anti-corrosive treatment
Permanent split capacitor and totally enclosed fan motor
Enclosed fan motor has hermetically sealed overload for
arc-free operation.
Hermetically sealed refrigeration system.
Environmentally sealed on/off switch and gold plated
contacts in thermostat for corrosion resistance.
Solid-state control relays for compressor and fan operation.
Hot gas bypass allows the air conditioner to operate at low
ambient conditions without freezing
The ONLY room air conditioner that meets the United States National Electric Code, Article 500, requirements for
Class I, Division 2, Groups A, B, C, and D Hazardous Locations.

Due to continuing engineering research and technology, specifications are subject to change without notice. Manufactured under U.S. Design
Patent DES 368, 306 decorative front; Utility Patent 5, 622, 058. MAXIMUM outdoor ambient operating temperature is 130°F. MAXIMUM
TEMPERATURE RATING FOR CLASS I, DIVISION 2, GROUPS A,B,C,D.
OPERATING TEMPERATURE CODE T3B
Specifications
Installation Information
Model
Cooling Capacity Electrical Characteristics (60 Hertz)
Energy Efficiency
Ratio AHAM
Moisture
Removal
Air Direction
Controls
Room Side Air
Circulation
(BTU/Hr.- AHAM) Volts Rated Amps AHAM Watts EER (Pints/ Hr.) CFM
SH15L30 15000/15000 230/208 7.9/8.7 1765/1765 8.5/8.5 4.0 8-way 375
SH20L30 19800/19500 230/208 10.0/10.9 2200/2167 9.0/9.0 5.7 8-way 375
Model
Dimensions (Inches)
Window Width
(Inches)
Thru-The-Wall Finished
Hole (Inches)
Circuit Rating
Breaker or
T - D Fuse
Weight
(Lbs.)
Height Width
Depth
Overall
Depth Hood
to Louvers
Minimum
Extension
Into Room
Minimum
Extension
Outside Min.Max.Height Width Volts - Amps Net Shipping
SH15L30 15 15/16 25 15/16 27 3/89 3/ 16 3 1/ 16 16 15/ 16 27 7
/842 16 3/
16 26 3/16 250V - 15A 140 152
SH20L30 17 15/16 25 15/16 27 3/89 3/ 16 3 1/ 16 16 15/ 16 27 7
/842 18 3/
16 26 3/16 250V - 15A 166 179