Friedrich Kuhl SQ06 User manual
Installation and Operation Manual
Room Air Conditioners
115-Volt:
Q Chassis Models
SQ06, SQ08
115-Volt: EQ08
PM
FAN SPEEDSCHEDULE
SYSTEM FAN MODE
POWER
ROOMTEMP
SETPOINT
AM
F
AUTOFA N
CONTINUOUS
AUTOSPEED
88C
ONOFF
AUTO
SCHEDULE
CHECK $MART
FILTER
93001011_01
2
Model information can be found on the name
plate behind the front cover.
Please complete and mail the owner
registration card furnished with this product,
or register online at www.friedrich.com. For
your future convenience, record the model
information here.
MODEL NUMBER
SERIAL NUMBER
PURCHASE DATE
Register your air conditioner
your unit to assure quiet operation, the greatest circulation of cool, dry air, and the most economic operation.
THANK YOU, on behalf of our entire company,
for making such a wise purchase.
FRIEDRICH
AIRCONDITIONING CO.
SANANTONIO, TX
MODELNUMBER
SERIALNUMBER
VOLTS60 HZ/ 1PH
115
103 VOLT MIN.
COOLING:
BTU/HR
HEATING:
BTU/HR
7500
EER
9.8
AMPS
6.9
4000
EER
AMPS
11.2
MAX AMPS:
23.5 OZS.
DESIGNPRESSURES
600 PSIG HS
300 PSIG LS
U.S. PATENTS
D458, 229 S
5,634,346
IFCONNECTED TO
AFUSE PROTECTED
CIRCUIT, USEA 12 A
TIMEDELAY FUSE
LISTED 183H
AALY00219
EQ08N11-A
ROOM AIR
CONDITIONER
FRIEDRICH
Assembled in Mexico
MODEL NUMBER
AIR CONDITIONING CO.
SAN ANTONIO, TX
SERIAL NUMBER
VOLTS60 HZ/ 1PH
AALY00219
EQ08N11-A
3
...................................................................................................................................................................................................................................................................................... 3
Safety Precautions ................................................................................................................................................................................................................................................................................... 4
.............................................................................................................................................................................................................................................. 5
.............................................................................................................................................................................................................................. 6
................................................................................................................................................................................................................................... 6
.................................................................................................................................................................................................................................................... 7
.................................................................................................................................................................................................................................................................... 12
............................................................................................................................................................................................................................................................................ 12
........................................................................................................................................................................................................................................................14
................................................................................................................................................................................................................................................ 14
................................................................................................................................................................................................................................................................ 15
...............................................................................................................................................................................................................................................................16
................................................................................................................................................................................................................................................. 19
............................................................................................................................................................................................................................................................................20
..................................................................................................................................................................................................................................................................... 21
.......................................................................................................................................................................................................................................................................22
..................................................................................................................................................................................................................................................24
.............................................................................................................................................................................................................................................................................25
.........................................................................................................................................................................................................................................................................25
............................................................................................................................................................................................................................................................................25
Troubleshooting Tips ..............................................................................................................................................................................................................................................................................26
1 ............................................................................................................................................................................................................................................................................................28
Table of Contents
Performance Testing Installation and Test Method (for testing laboratory use) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ................................................ 3
4
Safety Precautions
NOTICE
CAUTION
WARNING
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is a safety Alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol with the word “WARNING”
or “CAUTION”. These words mean:
Indicates a hazard which, if not avoided, can result in severe personal injury or
death and damage to product or other property.
Indicates a hazard which, if not avoided, can result in personal injury and
damage to product or other property.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what will happen if the instructions are not followed.
Indicates property damage can occur if instructions are not followed.
WARNING
Refrigeration system
under high pressure
Do not puncture, heat, expose to flame or
incinerate.
Only certified refrigeration technicians should
service this equipment.
Only use gauge sets designed for use with
R410A. Do not use standard R22 gauge sets.
R410A systems operate at higher pressures
than R22 equipment. Appropriate safe
service and handling practices must be used.
California Safe Drinking Water and Toxic Enforcement Act
WA This product contains chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. Wa and after andling
5
Make sure the wiring is adequate for your unit.
install or relocate this unit, be sure that the amperage rating of the circuit
1
DO NOT use an extension cord.
The cord provided will carry the proper amount of electrical power to the
Make sure that the receptacle is compatible with the air
conditioner cord plug provided.
electrician. The grounded receptacle should meet all national and local
with the air conditioner.
Test the power cord
00
1. Plug power supply cord into a grounded 3 prong outlet.
2. 1
3.
4.
damaged, it must be replaced with a new power supply cord from the
00 1
WARNING: Before Operating Your Unit
MODEL
CIRCUIT RATING
OR TIME DELAY
FUSE
REQUIRED WALL
RECEPTACLE
AMP VOLT NEMA NO.
• SQ06
SQ08 •EQ08 15 125 5-15P
Table 1.
WARNING
Electrical Shock Hazard
Make sure your electrical receptacle has the
same configuration as your air conditioner’s
plug. If different, consult a Licensed Electrician.
Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.
Unplug unit prior to performing any service.
Always plug into a grounded 3 prong oulet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
NOTICE
Do not use the LCDI device as an ON/OFF switch.
Failure to adhere to this precaution may cause
premature equipment malfunction.
Figure 1
FRR072
WARNING:
TEST BEFORE EACH USE!
1. PRESS REST BUTTON.
2. PLUG LCDI INTO POWER
RECEPTACLE.
3. PRESS TEST BUTTON,
RESET BUTTON SHOULD
POP UP.
4. PRESS RESET BUTTON
FOR USE.
DO NOT USE IF ABOVE TEST
FAILS.
WHEN GREEN LIGHT IS ON.
IT IS WORKING
PROPERLY!
RESET
TEST
6
Standard Filter Cleaning / Installation Instructions
STEP 1.
up and outward.
STEP 2.
STEP 3.
Procedure” on the inside of the front door.
Figure 2 Figure 3
STEP 1.
instructions above or on the inside of the front cover.
STEP 2.
300 3
Premium Carbon Filter Installation Instructions
STEP 3. Place the black plastic filter frame with the carbon filter
Figure 4 Figure 5
FRR075
FILTER
DOOR
FRR076
FILTER FRAME
INSTRUCTIONS
FILTER
DOOR
FRR077
FILTER FRAME
HOOKS (6)
FRR078
7
FRR079
2 DIGIT DISPLAY
Shows Setting for:
- Set Point Temperature (default)
- Room Te mperature
- Clock (AM/PM)
ON / OFF:
Turns unit on/off
SYSTEM
Cycles between:
- COOL
- HEAT (if available)
- FAN ONLY
FAN MODE
Sets fan to either:
- AUTOFAN
-- Cycles automatically
- CONTINUOUS
-- Runs continuously
FAN SPEED
Sets fan speed:
- LOW
- MED
- HIGH
- AUTO
HEAT
FILTER
Check / Clean
AUTO SPEED
Automatically selects
best fan cooling speed
DEMAND RESPONSE EVENT
(optional)
FAN SPEED
Selected fan speed
ROOM TEMP
SET POINT
AM
PM
F
AUTO FAN
CONTINUOUS
AUTO SPEED
88 C
ON OFF
SCHEDULE
CHECK$MART
FILT ER
COOL
FAN
ONLY
CONTROL
LOCKED WI-FI
CONNECTED (optional)
WAIT
TEMPERATURE
UP
TEMPERATURE
DOWN
SCHEDULE ON
TIMER / SCHEDULE
Turns ON or OFF
TIMER ON
IR WINDOW
Do not block
1 0 10
seconds, the display switches off. Touching any button automatically changes the display to full brightness.
Control Panel Operation
Figure 6
SYSTEM SYSTEM
FRR095
4 Speed
AUTO
LOW MEDIUM HIGH AUTO*
FAN SPEED FAN
SPEED
FAN MODE
FAN
MODE allows you to select between
AUTO FA N
and CONTINUOUS modes.
AUTO FA N
C
ONTINUOUS
UP and DOWN
1
to change at a faster pace. The factory preset lower and upper limits
are 60 1 99 3
TIMER SCHEDULE allows you to select between the 24-Hour
Timer
SCHEDULE options. Pressing this button will activate the selected
*
elects fan speed needed to satisfy desire set point.
Basic Functions
8
Advanced Functions.
Set TIME and DAY
or
1 1 11
display the unit's current minutes.
Figure 7
FRR097
FRIEDRICH
AIR CONDITIONING CO.
SAN ANTONIO, TX
or
11
unit's day setting.
or 1 1
3
the day correctly if any schedule is to be used.
24-HOUR TIMER
button is a 24-Hour
1 130
set point cannot and will default to the last setting used.
25
FRR129
1
time out and return to the normal operating display.
4
FRR130
AM
11
FRR128
Set Timer: Setting the Start Time
3 icon
Press the or
AM
4ON
FRR141
21ON
FRR142
or
1
1
The display will return to normal once the settings are saved.
To activate the timer, you must press the button.
9
AM
11 OFF
FRR145
55 OFF
FRR146
3 icon and
Press the or
11
or
1
11
The display will return to normal once the settings are saved.
To activate the timer, you must press the button.
Timer Activated Scenarios
FRR157
the Timer by pressing the button..
Set Timer: Setting the Stop Time
SET POINT
F
AUTO FAN79
FRR159
icon
icon will remain illuminated,
as shown below.
To deactivate and shut off the Timer, press the button again. Whether
the unit will turn back on in the last state operated.
TIMER and PRE-PROGRAMMED SCHEDULING
24-Hour Timer -
Residential Schedule 1 0
This option causes your unit to raise temperatures to 85°F during the typical
work day, lower them again to 78°F prior to the time when most people will
return home, and raise slightly to 82°F overnight.
Commercial Schedule
This option causes your unit to raise temperature to 84°F after typical
working hours and on weekends when commercial spaces are typically
unoccupied.
1
To select between these 3 options, press and hold the button
3
1
or buttons. See below for images of each option.
FRR139
24-Hour Timer .
Timer/Schedule Select
10
The $MART icon illuminates to indicate that the system is being controlled
SET POINT
F
AUTO FAN79
FRR125
$MART
you to unlock the full control potential of your Kuhl unit.
and many other options remotely from a smartphone, tablet or computer.
icon illuminates to indicate that the
system is receiving a Wi-Fi connection.
SET POINT
F
AUTO FAN79
FRR126
1
function will time out and leave the original selection.
normal display.
Residential Schedule 1.
1
SCHEDULE
FRR137
Commercial Schedule .
2
SCHEDULE
FRR138
To activate the selected timer or schedule, press the button
SCHEDULE
and Timer icons illuminates and the unit immediately runs the current
period schedule parameters, as shown below..
Scheduler Activated Scenarios
SET POINT
F
AUTO FAN79
SCHEDULE
FRR155
SET POINT
F
AUTO FAN79
FRR161
To deactivate and shut off the Schedule, press the button again.
The
SCHEDULE
and Timer icons will disappear and the unit will stay in
Timer - Scheduler Control Block
3
button.
FRIEDRICHLINK WI-FI CONTROL
EXTERNAL CONTROL STATUS
11
ºF - ºC Select
and
buttons simultaneously for three seconds.
f
FRR133
press the or
normal with your desired setting.
DIM Function
0
100 3
1
the or buttons to change the setting.
1
FRR192
1
0 1
1
display to time out and return to the normal operating display.
SETTINGS & ALERTS
The 3 1 indicates a
100
1
15 seconds causes the display to time out and return to the normal
operating display.
CHECK
FILT ER
icon displays.
SET POINT
F
AUTO FA N79
FILT ER
FRR118
CHECK
The alert can be dismissed by pressing the
FAN
MODE and for 3 seconds.
SET POINT
F
AUTO FAN79
FRR120
Lock Control Panel
To lock the front panel controls, press and hold the
FAN
SPEED + buttons
for 3 seconds. The lock icon illuminates to indicate the locked status.
SET POINT
F
AUTO FAN79
FRR116
The lock icon disappears to indicate unlocked status.
To unlock, press and hold the FAN
SPEED
+ buttons for 3 seconds.
Check Filter Alert
This feature reduces wear and tear on your unit by giving the
damage that could occur from starting up the unit too quickly after
it stops running.
Compressor Lockout Alert
3
wait icon clears, normal operation should begin.
The wait icon illuminates when the compressor lockout is active.
12
FRR080
30°
45°
60°
30°
45°
60°
25ft
25ft
8ft
4ft
25ft
16ft
6ft
30°
30°
45°
60°
45°
60°
25ft
25ft
25ft
8ft
25ft
25ft
7.5ft
SIDE VIEW
TOP VIEW
Figure 8
Remote Control Operation
Remote Control 9 10
Getting Started
located on the back of the unit.
Operation - The remote control should be within 25 feet of the air conditioner
to turn the remote on. The remote will automatically power off after 15
seconds if the buttons are not being pressed. The remote must be on to
control the unit.
POWER Button - Turns remote and unit on and off.
SYSTEM Button
operation.
FAN MODE Button
AUTO FAN
CONTINUOUS
fan operation.
NOTE:
AUTO FA N
indicates CONTINUOUS CONTINUOUS mode, fan speed is
determined by your selection on the
FAN
SPEED button.
FAN SPEED Button
the
FAN
SPEED
the new speed level.
SCHEDULE Button – Press the SCHEDULE
selected timer or schedule function. Pressing the SCHEDULE button a second
UP and DOWN Arrows - Pressing either the
changes the desired room temperature. These buttons are also used to
Remote Effectiveness
Hand Held Remote - Has an operating range of up to 25 ft. The infrared
remote control signal must have a clear path to transmit the command
to the air conditioning unit. The remote signal has some ability to
"bounce" off of walls and furniture similar to a television remote
control. The diagram below shows the typical operating range of the
control in a standard room with 8 ft. high ceilings.
13
SYSTEM
SCHEDULE
FAN SPEED
FRR081
FAN SPEED SCHEDULE
SYSTEM FAN MODE
POWER
DISPLAY
FAN MODE
POWER
TEMPERATURE
UP
TEMPERATURE
DOWN
F
AUTO FA N
AUTO
CONTINUOUS 88
C
SYSTEM
MODE
FAN
MODE
FAN
SPEED
SCHEDULE
ICON
HEAT
ICON
FAN ONLY
ICON
°F / °C
ICONs
FRR082
F
AUTO FAN
AUTO
CONTINUOUS 88
C
COOL
ICON
Figure 9
Figure 10
14
Airflow Selection and Adjustment
Air flow direction adjustment
left or right side of the discharge opening. Each of the banks of louvers
can be directed left, right, up or down in order to achieve the most optimum
bank and move it in the direction that you would like the air to be
out of one side of the louvers than the other.
FRR083
LEFT AIRFLOW
LEVER
RIGHT AIRFLOW
LEVER
WARNING
Electrical Shock Hazard
Make sure your electrical receptacle has the
same configuration as your air conditioner’s
plug. If different, consult a Licensed Electrician.
Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.
Unplug unit prior to performing any service.
Always plug into a grounded 3 prong oulet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
READ THIS FIRST! Electrical Requirements
Figure 11
Installation Instructions
NOTE: This section includes installation instructions for window mount
designed for permanent thru-the-wall installation. Mounting the
unit in a window will require a window accessory kit, available
through your Friedrich dealer.
IMPORTANT:
electrical professional as necessary to insure home wiring is per local
electrical codes.
CIRCUIT PROTECTION
malfunction or failure of an air conditioner, therefore, it is necessary that the
The power cord has a plug with a grounding prong of approved type
5 for the correct type of plug receptacle for your model.
15
Items required for installation (included in cooling only units, sold separately for heat/cool models)
Recommended tools required for installation: (not included)
ITEM NO DESCRIPTION QTY.
for replacement installations only
1
2
1
1
ITEM NO DESCRIPTION QTY.
E
F
6
5
4
Required for all installations Recommended for thru-the-wall installations
E F
FOR WINDOW INSTALLATIONS, PROCEED TO THE NEXT PAGE.
FOR THRU-THE-WALL INSTALLATIONS, SKIP TO PAGE 22.
H
H
1
1
0
16
Standard Window Installation
STEP 1. 1
WARNING
Falling Object Hazard
Not following Installation Instructions
for mounting your air conditioner can
result in property damage, injury, or
death.
STEP 2.
13
Figure 13
Figure 12
STEP 3.
underneath the unit to lift and carry to the window, as shown
1
CAUTION
Excessive Weight Hazard
Use two or more people when
installing your air conditioner.
Failure to do so can result in
back or other injury.
Figure 14
IMPORTANT:
ordinances prior to attempting installation.
17
STEP 4. Place unit in window with the bottom support rail up against the
onto upper support rail. The unit should be slightly
1 1
on the type of window, install the appropriate
security lock as recommended by manufacturer.
CAUTION
Cut/Sever
Although great care has been
taken to minimize sharp edges
in the construction of your unit,
use gloves or other hand
protection when handling unit
Failure to do so can result in minor
to moderate personal injury.
STEP 5.
1
1 1
1
curtains using both screw holes and your unit sleeve directly to
the lower window stool using the instruction Steps 5.1 - 5.3 shown
Steps 1 - 5, then you can proceed to Step 6 found on Page 18.
Pull unit from sleeve, using the side handles located on
1
STEP 5.1.
Figure 15
Figure 16
Figure 17
SECURE TO WINDOW
SASH THROUGH TOP
SCREW HOLE
THIS STEP MUST BE FOLLOWED COMPLETELY TO INSURE
UNIT IS ADEQUATELY SECURED TO WINDOW.
SECURE TO
WINDOW JAMB
THROUGH
BOTTOM / SIDE
SCREW HOLE
18
STEP 5.2. through screw hole in the bottom center of sill channel using 1 sup-
plied 1 1
1
you may secure each curtain with an additional screw through the remaining screw hole, insuring each window curtain is secured
accommodate varying window types. 1
1 screw per curtain and install the appropriate security lock as recommended by window manufacturer.
SECTION A-A
A
A
SECURE CURTAINS
THROUGH REMAINING
HOLES USING EITHER 1/2"
SCREWS (ITEM E: BLUE
BAG) OR 1 1/4" SCREWS
(ITEM F: GREY BAG).
SHELL SUPPORT CHANNEL
WINDOW SASH
SLEEVE
SILL
CHANNEL
SECURE SILL CHANNEL
TO WINDOW STOOL
USING (1) 1 1/4" SCREW
(ITEM F: GREY BAG).
WINDOW STOOL
in the front of unit and out of the way when inserting it back into the sleeve.
19
STEP 5.3.
CAUTION
Excessive Weight Hazard
Use two or more people when
installing your air conditioner.
Failure to do so can result in
back or other injury.
Figure 18
Figure 19
19
STEP 6.
CIRCUIT PROTECTION
your unit, verify the ampere rating of the time-delay fuse or circuit breaker
which protects your unit. The ampere rating of the time-delay fuse or circuit
breaker shall be 15 amps
Simply plug in the power cord and follow the operation steps
Plug in unit..
STEP 8.
Replacement Installation Instructions
both window and thru-the-wall.
properly installed and in good condition.
1 1
Figure 22
SHELL GASKET (ITEM D).
STEP 7.
window width and insert it between the window sashes
as shown in Figure 21.
1
0
First, measure the width from one side of the air condi-
0
1
0
the 0
other
Figure 21
Figure 20
A
B
C
20
WARNING
Electrical Shock Hazard
Make sure your electrical receptacle has the
same configuration as your air conditioner’s
plug. If different, consult a Licensed Electrician.
Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.
Unplug unit prior to performing any service.
Always plug into a grounded 3 prong oulet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
STEP 1.
Cord Routing Change
Unplug unit.
A.
B.
C.
Save to reinstall later..
D.
A.
B.
C.
Figure 24A
Figure 24B
to the left side of the unit.
For convenience and optimum appearance the direction of the power
cord can be changed from left to right by following the procedure below.
outlet. 3
Figure 23
Other manuals for Kuhl SQ06
1
This manual suits for next models
2
Table of contents
Other Friedrich Air Conditioner manuals
Friedrich
Friedrich C24YF User manual
Friedrich
Friedrich Vert-I-Pak VEA09K User manual
Friedrich
Friedrich MC24Y3F User manual
Friedrich
Friedrich 000 BTU'S User manual
Friedrich
Friedrich Climate Master 702 Series User manual
Friedrich
Friedrich MWM09Y1J User manual
Friedrich
Friedrich PTAC Series User manual
Friedrich
Friedrich M30YJ User manual
Friedrich
Friedrich MR09Y1F User manual
Friedrich
Friedrich QStar SQ05 User manual
Friedrich
Friedrich CP05N10 User manual
Friedrich
Friedrich WallMaster WS08C10-A User manual
Friedrich
Friedrich CP10 User manual
Friedrich
Friedrich QuietMaster KS12 User manual
Friedrich
Friedrich M12CJ User manual
Friedrich
Friedrich 9315342973 User manual
Friedrich
Friedrich X-Star XQ06 User manual
Friedrich
Friedrich M18CJ User manual
Friedrich
Friedrich H)A09K25L User manual
Friedrich
Friedrich QuietMaster KM18L30 User manual
Popular Air Conditioner manuals by other brands
Fujitsu
Fujitsu ASYG 09 LLCA installation manual
LG
LG MultiV Series installation manual
Frigidaire
Frigidaire FFRE103WA1 use & care
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries DXK05ZTLA-WF user manual
GE
GE AEC14 Owner's manual and installation instructions
Frigidaire
Frigidaire FFRE0533S1E0 Use & care guide
Panasonic
Panasonic CU-QE12MKE Service manual
Hitachi
Hitachi RAM-55QH4 Service manual
North American
North American INVENTER SPLIT-TYPE ROOM AIR CONDITIONER installation manual
Daikin
Daikin J Series Service manual
Mitsubishi Electric
Mitsubishi Electric MSC-GE20VB operating instructions
LG
LG E1823P owner's manual
Amana
Amana PHB**C Service instructions
Daikin
Daikin Comfort Flex CLIV Series Installation, operation and maintenance manual
Gree
Gree GWH09AB-D3DNA1D/I Service manual
Sanyo
Sanyo THX2452 user manual
Daikin
Daikin RX15RMVJU installation instructions
Mitsubishi Electric
Mitsubishi Electric Mr.Slim PEA-M200 installation manual