Friedrich M21DYF Quick setup guide

Ductless Split Systems
Wall Mounted, Heat Pump Dual-zone
PURCHASER P.O. # DATE
PROJECT LOCATION
ENGINEER ARCHITECT
SUBMITTED BY FOR APPROVAL FOR REFERENCE
ITEM PLAN DESIGNATION QUANTITY COOLING BTU/H VOLTAGE FRIEDRICH MODEL
Ductless_Dual_Zone_Heat Pump_Submittal_10
Features
• LCD remote for each indoor unit
• 24-hour timer and sleep timer
• Auto/cool/dry/fan/heat modes
• Four fan speeds heating or cooling:
high/medium/low/quiet, plus auto-fan
• Continuous ‘Air Sweep’ UP/DOWN
• Auto-restart after power interruptions
• Auto-shut aps close when unit is off
for a sleeker appearance
• Washable, reusable air lters
• Removable front grille
• Auto-changeover (heat pump models)
• Secured remote control holder
• Four different transmitter codes to prevent
unintentional interference with nearby units
MW18DYF, M21DYF
M24DYF
MR24DY3
All Inverter line

Ductless_Dual_Zone_Heat_Pump_Submittal_11
Ductless Split Systems
Wall Mounted, Heat Pump Single-zone
Refrigeration line sets
Insulated line sets are available for all Friedrich split systems in
15 ft. and 35 ft. lengths. Each line set is equipped with are nuts
on both ends. Both liquid and suction lines are insulated. Line
sets can be joined together with eld supplied double female
connectors. Each system requires one line set for each indoor
unit installed. On multi-zone systems, line sets should be ordered
based on individual indoor unit capacities not total system
capacity. For example, a M18DYF uses 2 line sets for 9,000 Btu
units, not 1 for the 18,000 Btu product.
NOTE: All models have low ambient
capabilities built-in. Capacity is
reduced as 0 degrees Fahrenheit is
approached.
NOTE: All R410A models have 1/2˝
UNF 20 thread per inch charging and
vacuuming ports. An adapter must be
used for 1/4˝ gauges. Adapter part
number 67270018 is available through
Friedrich parts distributors.
Due to continuing research in
new energy-saving technology,
specications are subject to change
without notice.
Specifications
PERFORMANCE RATINGS
SYSTEM MODEL NO. M18DYF M21DYF M24DYF
INDOOR MODEL 2 x MW09Y3FM MW09Y3FM MW12Y3FM 2 x MW12Y3FM
OUTDOOR MODEL MR24DY3F MR24DY3F MR24DY3F
Capacity Cooling Btu 9500 ea. 9500 12000 12000 ea.
CapaCity Cooling Min - Max Btu 5100-11300 ea. 5100-11300 ea. 5100-13600 ea 5100-13600 ea
SenSible Heat Ratio 0.77 0.77 0.77 0.77
CapaCity Heating @ 47°F Btu 11000 ea. 11000 ea. 14000 14000 ea.
CapaCity Heating Min - Max Btu 5100-13000 ea. 5100-13000 ea. 5100-15400 ea. 5100-15400 ea.
CapaCity Heating @ 17°F Btu 9500 ea. 9500 ea. 11000 10500 ea.
HSpF 9.0 9.0 9.0
SeeR 16.5 16.5 16.5
eeR 12.2 11.2 10.4
eneRgy StaR YES NO NO
MoiStuRe ReMoval Pts/h 2.9 ea. 2.9 ea 3.7 ea. 3.7 ea.
aiRFlow (Quiet, low, Med, HigH) CFM 185,220,260,295 185,220,260,295 215,250,305,355 215,250,305,355
Sound Rating - indooR dB-A 27,29,33,37 27,29,33,37 30,34,39,42 30,34,39,42
Sound Rating - outdooR dB-A 52 52 52
opeRationg Range (Heating) °F 0 - 115 (14 - 75) 0 - 115 (14 - 75) 0 - 115 (14 - 75)
eSt. yeaRly opeRating CoSt $128 $152 $152 $184
eleCtRiCal data (all indooR unitS ReCeive poweR FRoM outdooR unit; valueS liSted aRe total)
poweR SouRCe 230/(208)-60-1 230/(208)-60-1 230/(208)-60-1
Min. aMpaCity A 15 15 15
Cooling wattS W 1600 1900 2300
Max. td FuSe/bReakeR A 20 20 20
ReFRigeRation SySteM
ReFRigeRant R410A R410A R410A
CoMpReSSoR type Inverter Inverter Inverter
ConneCtionS Flare Flare Flare
liQuid line o.d. in 1/4"1/4"1/4"1/4"
SuCtion line o.d. in 3/8"3/8"3/8"3/8"
FaCtoRy pReCHaRge ft 98' 98' 98'
Max. line lengtH ft Each unit:82 Total:98 Each unit:82 Total:98 Each unit:82 Total:98
Max. HeigHt diFFeRenCe ft 33' 33' 33'
diMenSionS & weigHt
indooR unit
w x H x d in 31 1/8" x 10 7/8" x 8 1/2" ea. 31 1/8" x 10 7/8" x 8 1/2" ea. 31 1/8" x 10 7/8" x 8 1/2" ea.
net weigHt lbs 21 ea. 21 21 21 ea.
SHipping weigHt lbs 26 ea. 26 26 26 ea.
outdooR unit
w x H x d in 35 3/8" x 32 5/8" x 13"35 3/8" x 32 5/8" x 13"35 3/8" x 32 5/8" x 13"
net weigHt lbs 136 136 136
SHipping weigHt lbs 154 154 154
USED WITH: LENGTH-FT. LIQUID SUCTION KIT#
All 9000 and
12000 Btu
indoor units
15' 1/4”3/8”T32150
35' 1/4”3/8”T32350