Frontgate Marchand Upholstered Carved Bed User manual

Page | 1
Assembly Instructions
Marchand Upholstered Carved Bed

Page | 2
PARTSLIST
HEADBOARD (1 PC)
FOOTBOARD (1PC)
SIDE RAILS (2PCS)
BED SLATS (9 PCS)
CENTER SLAT (1 PC)
CENTER SUPPORT (1 PC)
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for any small parts
that may have come loose inside the carton during shipment.
Identify, count all parts, and compare with the Parts List below.
*** Caution! Please read all instructions carefully before starting the assembly process. These items can be
cumbersome and heavy; therefore, a two-or-more-person assembly is recommended in order to prevent personal
injury and ensure that the items are not damaged during the assembly process.

Page | 3
HARDWARE LIST
BOLT THREAD M8 X 3.5” : 4 PCS
HEXAGONAL BOLT M8 x 5” : 4 PCS
SPRING WASHER M8 : 8 PCS
NUT M8 : 8 PCS
BED WASHER : 8 PCS
PLAIN WASHER : 12 PCS
TOOLS : WRENCH 1 PC

Page | 4
STEP 1 :
Connect side rails to headboard using hexagonal bolt M8 x 5” (4 pcs)+ Plain washer (4 Pcs)+ Nut M8 (4
pcs)
STEP 2 :
Connect side rails to footboard using thread bolt M8 x 3, 5” (4 pcs)+ Plain washer (4 Pcs)+ Nut M8 (4
pcs)

Page | 5
Step 3 :
Attach the center support into the center slat
Step 4 :
Put the center slat on the headboard and footboard
Step 5 :
Put the 9 Pcs slat on the bed, see below for details
Slat : 9pcs

Page | 6
Step 6 :
Assembly is completed, put your mattress onto the bed, and the bed ready for use.
Note: please check the bolts every three months to make sure the bolts remain properly secure
The bed should not be moved after it has been assembled without first disassembling the bed rails. Excessive
movement while the bed rails are locked in place may damage bed parts.
Please contact one of our Product Specialists for assembly assistance or questions at
1-800-537-8484 or email to [email protected]. Specialists are available weekdays 8:00 am to 8:00 pm EST or
Saturday 9:30 am to 6:00 pm EST
Thank you for your purchase