Frontgate CAMPBELL DINING TABLE 162764 User manual

PRODUCT NAME:CAMPBELL DINING TABLE
ITEM NUMBER:162764
DIMENSIONS OF ITEM ASSEMBLED: 30”H x 90”W X 46”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
Page 1 of 3
MADE IN CHINA
Customer Service:
800-537-8484
Online: www.frontgate.com
DATE: 03/19/2019

Page 2 of 3
TOOLS NEEDED:
-Requires a screwdriver.
-Power drill suggested.
-Assembly requires 2 or more people.
NOTE: When unpacking, lay the parts on
a padded surface such as the packaging provided.
Be sure to locate all hardware before throwing
away any packaging.
Hardware Located
Here (A-D)
Ltr.
B
10*60mm Allen Bolts
10mm Lock Washers
10mm Flat Washers
M8 Allen Wrench8
Qty. Ltr.
C 8
D 1
Qty.Hardware Included
Ltr.
E
Table Top (E)
Legs (F)
1
stnenopmoC.ytQ
F 4
A 8

STEP 1: Insert the Legs (F) into each corner of the Table Top (E). Use an Allen Bolt (A), Lock
Washer (B) and Flat Washer (C) to secure the Leg in place by tightening the Bolt with the
Allen Wrench (D).
Page 3 of 3
STEP 2: Turn the Table upright. If the Table is uneven, adjust the Levelers located on the bottom of
the Legs (F). Carefully elevate one side of the Table and twist the Levelers clockwise and
counterclockwise until the Table sits evenly.
(A)
(B) (C)
(D)
Frontgate: Please contact one of our Product Specialists for assembly assistance or questions at
1-800-537-8484 or email [e-mail].
Cleaning & Care:To clean, wipe the Fixture with a soft, dry cloth.Avoid the use of harsh or
abrasive chemicals as they may damage the finish.
Specialists are available weekdays 8:00 AM to 8:00 PM EST or Saturdays 9:30 AM to 6:00 PM