Frymaster 3000 Installation guide

3000 CONTROLLER
TRAINING MANUAL
April 26, 2012
Software Version 1.59.03

3000 CONTROLLER USER GUIDE
2
Contents
Quick Reference: Using the 3000............................................................................................................................... 3
Menu Summary Tree ................................................................................................................................................... 6
Main Menu: Programming your Fryer........................................................................................................................ 8
Main Menu: Navigation............................................................................................................................................. 8
Main Menu: Product Setup–Single Setpoint Cooking............................................................................................... 9
Main Menu: Product Setup–Multiple Setpoint (Segmented) Cooking..................................................................... 11
Overview............................................................................................................................................................ 11
Multiple Setpoint (Segmented) Cooking Setup.................................................................................................. 13
1. Set Up Product......................................................................................................................................... 13
2. Enter Total Cook Time and Starting (1st) Temp........................................................................................ 13
3. Enter 2nd Temp and Time Remaining....................................................................................................... 14
4. Enter 3rd Temp and Time Remaining ....................................................................................................... 14
5. Enter 4th Temp and Time Remaining........................................................................................................ 14
6. End Temp Changes or Repeat Step 5 if needed...................................................................................... 15
7. Create 1st Shake Alarm............................................................................................................................ 15
8. Create 2nd Shake Alarm ........................................................................................................................... 15
9. Create 3rd Shake Alarm............................................................................................................................ 16
10. Set Filter Prompt, Instant ON and Hold ................................................................................................... 16
11. Exit or Set Up Additional Products........................................................................................................... 16
Main Menu: Vat Setup............................................................................................................................................ 17
1. Enter Vat Setup........................................................................................................................................ 17
2. Vat Set Up: System................................................................................................................................. 17
3. Vat Set Up: Time/Date ............................................................................................................................ 18
4. Vat Set Up: DST Set Up (Daylight Savings Time)................................................................................... 19
5. Vat Set Up: Filter..................................................................................................................................... 20
6. Vat Set Up: E-Log ................................................................................................................................... 21
7. Vat Set Up: Change Password................................................................................................................ 21
Main Menu: Tech Mode.......................................................................................................................................... 21
Filter Menu................................................................................................................................................................. 22
Filter Menu: Controller ON..................................................................................................................................... 22
1. Enter Filter Menu –Controller ON.................................................................................................................. 22
2. Filter Menu: Filter –Controller ON.................................................................................................................. 23
3. Filter Menu: Clean and Filter –Controller ON ................................................................................................ 24
4a. Filter Menu: JIB and None Settings - Dispose –Controller ON.................................................................... 25
4b. Filter Menu: BULK Setting - Dispose –Controller ON.................................................................................. 26
5. Filter Menu: BULK Setting - Fill Vat from BULK –Controller ON.................................................................... 27
Filter Menu: Controller OFF ................................................................................................................................... 27
1. Enter Filter Menu –Controller OFF ................................................................................................................ 27
2. Filter Menu: BULK Setting –Fill Vat from BULK –Controller OFF................................................................. 28
3. Filter Menu: JIB and None Settings - Controller OFF 29
3a. Filter Menu: BULK Settings - Dispose - Controller OFF 30
4. Boil Out –Controller OFF 31
Polish Menu: Fryer ON............................................................................................................................................. 31
Enter Polish: Fryer ON........................................................................................................................................... 31
Polish: Fryer ON .................................................................................................................................................... 32
Info Mode: Viewing Operational Stats..................................................................................................................... 32
1. Info Mode: Controller OFF.............................................................................................................................. 33
1. Info Mode: Dispose Stats –Information since last dispose 33
2. Info Mode: Daily Stats –Information by day of the week over the past week................................................. 34
3. Info Mode: Selected Period Stats –Information for a specifically defined period of time................................ 35
4. Info Mode: Last Load Stats –Information about last cook............................................................................... 36
Scan Mode: Viewing Daily Stats .............................................................................................................................. 37
Appendix A: Cancelling Out of Filtering After Drain Valve has been Opened..................................................... 39
Appendix B: 3000 Controller Error Log Codes 41
Appendix C: Loading and Updating Software Procedures on 3000 Controller 42

3000 CONTROLLER USER GUIDE
3
Quick Reference: Using the 3000
Use to scroll through
menu, programming
options.
Press together
to launch POLISH.
Exits COOL
mode.
Heats oil
back to
setpoint.
Check
actual,
setpoint
temps &
software
version. Press to scroll through
menu & programming
options.
Press together to
change to 2nd
language.
Enter
codes,
respond
to left-
display
prompts.
Access
FILTER
prompts.
Product Button LED: Lit when button is active. All
buttons with a common setpoint light simultaneously.
2
78910 6
6
55
3
3
14
11
1
12
Menu strip slot
(access behind
bezel):
insert
customized
product names
2
MENU
STRIP
Blue buttons cook White buttons cook
Left Side Right Side
1.
On/Off
Turn controller(s) on/off; exit filter/polish cycles.
2.
Display screens.
Written information prompts.
3.
Product buttons
-Blue cook
left display
-White cook
right display
Press to start, complete, or cancel (press and hold) a product cook. To change
to another setpoint temperature, press, hold, then release desired non-lit button.
When lit, push again to start cook at alternate setpoint temperature. In scan
mode, press to view product setup.
4.
Product Button
LEDs
Lights for products that cook at setpoint. Flash during cook cycle.
5.
Left/Right Scroll
Navigate options in left display window. Press both simultaneously to launch
polish cycle.
6.
Up/Down Scroll
Navigate options in right display window. Press both simultaneously to change to
a second language.
7.
Exit Cool
Press and release to exit COOL mode. Heats oil back to setpoint. Press and
hold to cancel melt cycle.
8.
Thermometer
With controller on, shows setpoint in left display & vat temp on the right. (Toggles
for split pot). When off, shows setpoint, time, type of fryer, and software version.
If press and hold when on, displays AIF- - - -ATO - - - -. If press and hold when
off, displays AIF- - - -ATO - - - - . These displays are for service only to help
identify probe performance issues.
9.
Checkmark
With controller on or off, press and release to get recovery time (Normal for
Electric is 1:40 or less & Gas is 2:25 or less). With controller off, press and hold
for 4-5 seconds for info mode functions, or 10 seconds for main menu:
programming functions.
10.
Filter
With controller off or on, press for cooks remaining in filter cycle. Press and hold
to access filter menus (filter, clean and filter, dispose). (Fill vat from bulk option
will also display on Bulk Oil models.) With frypot off, press and hold to access
dispose & boil out.
11.
Exit/Scan
Press to view product set ups or to exit main menu programming functions.
12.
Menu Strip
Remove bezel to access customizable menu strip.
Cooking
1. Press ON/OFF1: Display screens2show system information and oil heats to setpoint.
2. DROP: Oil is at set temperature. Press any lighted product button3and drop product.
3. Other possible cooking display prompts:
-** Temperature is outside the normal cooking temperature range but controller will adjust cook
time accordingly, so cook can be started without affecting food quality. DROP will display when
temperature is back in the normal cooking range.
-High Temp –Temperature is higher than normal variation.
-Low Temp –Temperature is lower than normal variation.

3000 CONTROLLER USER GUIDE
4
4. SHAKE: If shake is needed, alarm sounds.
5. DONE: Audible alarm sounds. Press blinking product button3to cancel alarm and remove product.
NOTE: To cancel cook at any time: Press and hold blinking product button3.
COOL MODE deactivation
1. Press ON/OFF1: Oil heats to setpoint temperature.
2. COOL: After the programmed idle time, controller reverts to idle temperature and displays COOL. With
full frypots only, press at any time to reduce frypot’s temperature to COOL mode. Default is 250°F
(121°C). The COOL mode temperature can be adjusted. See MAIN MENU: VAT SETUP
3. Press EXIT COOL to return oil to setpoint temperature.
NOTE: COOL MODE can be activated on full frypots only at any time by pressing EXIT/COOL.
Polish (Controller must be ON)
1. To polish, press and hold simultaneously.
2. Controller displays2“POLISH NOW” alternating with “YES” and “NO”.
3. Select YES (button under YES display5) to launch polish cycle or NO to continue cooking.
4. Follow prompts for step by step polish guidance.
5. Controller turns off when polish cycle is complete.
Filter (Controller must be ON to record filter events and to display step by step filter prompts)
1. To filter, press and hold FILTER10. NOTE: Only one frypot can be filtered at a time; if filter is selected
on a second frypot “WAIT TO FILTER” will scroll until prior frypot filtration is completed.
2. Select desired filter function (filter, clean and filter, or dispose). (Fill vat from BULK will also display on
Bulk Oil models.)
3. Controller displays2“FILTER NOW” alternating with “YES” and “NO”.
4. Select YES (press button under YES display5) to launch filter cycle.
5. Select NO (press button under NO display5) to delay filter and cooking continues. Press NO two times
and filter count resets.
6. Follow prompts for step by step filter guidance.
7. Controller turns off when filter cycle is complete.
Filter (All filter functions can be performed with the fryer off. However, the fryer will not record them
as completed.)
NOTE: Controller must be OFF to access BOIL OUT filter function.
NOTE: Blue product button products will cook in the left display(s). White product button products will
cook in the right display(s).
Product Setup
Left Display
Right Display
Action
OFF
OFF
1. Press/hold about 10 seconds until PRODUCT SETUP is displayed.
MAIN MENU will flash before displaying PRODUCT SETUP.
PRODUCT
SETUP
[BLANK]
2. Press to program menu items and cooking parameters.
PRODUCT
SETUP
ENTER CODE
3. Enter 1650.
SELECT
PRODUCT
[BLANK]
4. Press desired product button.
LONG NAME
PRODUCT
NAME OR
BUTTON
NUMBER
5. Enter 8 character product name with text keys. Move cursor from letter
to letter with forward one letter or back one letter. This name
will alternate in the display window with the cook time during a cook (full
frypot).
6. Press to advance to next product set up feature or to move
back one product set up feature.
SHORT NAME
ABBREVIATED
PRODUCT
NAME OR
BUTTON
7. Enter abbreviated 4-character product name with the text keys. This
name will alternate in the display window with the cook time during a
cook (split frypot).

3000 CONTROLLER USER GUIDE
5
Left Display
Right Display
Action
NUMBER
8. Press to advance.
COOKING
MODE
SINGLE
SETPOINT
9. Press to advance. (Default is SINGLE SETPOINT)
NOTE: If multiple setpoint (segmented) cooking is desired, press
MULTIPLE. Then go to MULTIPLE SETPOINT (SEGMENTED) product
setup and follow the instructions.
1 TIME
0:00 OR
PREVIOUSLY
ENTERED TIME
10. Enter or confirm total cook time with numbered keys.
11. Press to advance.
1 TEMPR
TEMP
12. Enter cooking temperature.
13. Press to advance.
1 SENSITIVITY
NUMBER
14. Enter the level of sensitivity, 0-9, for the product. Sensitivity is the
likelihood that the cook time will have to stretch to compensate for
product variation (condition and/or weight).
15. Press to advance.
1 ALARM TIME
(SHAKE TIME)
0:00 OR
PREVIOUSLY
SET TIME
16. Enter time in cook cycle for audible alarm for shaking or stirring (e.g. 30
second SHAKE into a 3 minute COOK would be entered :30). If set to
0:00 skip to FILTER PROMPT.
17. Press to advance.
1 ALARM
NAME(SHAKE
ALARM)
SHAKE
18. Press to scroll to choice of alarm names. (Default is SHAKE).
19. Press to advance.
1 ALARM MODE
AUTO
20. Press . (Default is AUTO) Cancels alarm automatically
after a few seconds.
21. If MANUAL is desired press to scroll to MANUAL (requires user
to turn off alarm).
22. Press to advance.
1 ALARM TONE
SHORT
23. Press to scroll to choice of shake alarm tones. (Default is
SHORT).
24. Press to advance.
2 ALARM TIME
0:00
25. Enter time in cook cycle for second alarm for shaking or stirring. Leave
at 0:00 if second alarm is not needed.
26. Press to advance.
FILTER
PROMPT
0 OR
PREVIOUSLY
SET NUMBER
27. Enter number of cooks before a filter prompt. (Default is “0”) so filter
prompting is not associated with number of cook cycles.
28. Press to advance.
INSTANT ON
0 OR
PREVIOUSLY
SET NUMBER
29. Enter number of seconds after cook starts that heat comes on. Press
to advance. (Default is 5 seconds). O = Off
30. This is the time, in seconds, after cook starts that heat comes on, before
the controller adjusts the heat in response to the temperature. Note:
Instant on time may need to be adjusted for light cooking loads (in whole
minutes).
HOLD TIME
0:00 OR
PREVIOUSLY
SET TIME
31. Enter time to hold product before discarding (Default is 0 seconds).
- In Standard mode, the timer runs in the background but cancels when
a new cook is started on that product button. Controller can count
down holds from 8 different product buttons at the same time.
- In Lane mode (selected in TECH MODE), the timer counts down in
the display screen but cancels when a new cook is started in that lane.
Controller counts down one hold per cooking lane.
32. Press to advance.
EXIT
EXIT
33. Press button to lock in programming choices and continue with
additional product programming (#4 above).
SELECT
PRODUCT
[BLANK]
Press 2 times to return to OFF.

3000 CONTROLLER USER GUIDE
6
NOTE: To un-assign a product from a button, set the cook time to 0:00 and press EXIT/SCAN.
3000 Controller Menu Summary Tree
L
PRODUCT SETUP 1600
VAT SETUP 1656
TECH MODE
SELECT PRODUCT
SYSTEM
TIME / DATE
LONG NAME
LANGUAGE
FILTER
SHORT NAME
2ND LANGUAGE
COOKS TILL FILTER
COOKING MODE
LOCALE (CE OR NON CE)
EOD FILTER TIME
1 TIME
ENERGY (GAS OR ELEC)
FLUSHING TIMER
1 TEMP
TYPE (VAT)
BOIL OUT TIMER
1 SENSITIVITY
SYSTEM VOLUME
1 POLISH
1 ALARM TIME
SYSTEM TEMPR FORMAT
1 POLISH PROMPT TIME
1 ALARM NAME
EXIT MELT TEMP
1 POLISH DURATION
1 ALARM MODE
COOL MODE TEMP
1 POLISH START TEMP
1 ALARM TONE
COOL MODE DEFAULT
E-LOG
FILTER PROMPT
FRESH OIL
CHANGE PASSWORD
INSTANT ON
WASTE
EOD FILTER TIMER
RECOVERY ALARM
DRAIN SWITCH
BASKET LIFT
FILTER
CLEAN & FILTER
DISPOSE
FILL VAT FROM BULK
LAST DISPOSE STATS
DAILY STATS
SELECTED PERIOD STATS
LAST LOAD STATS
MAIN MENU AND TECH MODES
NOTE: Numbered items
(such as 1 TIME) may
have multiple entries.
For technician’s use only
FILTER
INFO MODE
HOLD TIME
HOLD TIME
LOAD STANDARD
DST SETUP
DISPOSE
With controller OFF,
press and hold 10
seconds, displays
Main Menu –
PRODUCT SETUP.
With controller ON, press and hold
FILTER button, displays, FILTER.
Controller prompts operator through
features and records completion.
With controller OFF, press and hold
FILTER button, displays FILTER.
Controller does not prompt operator
through features and does not record
completion.
With controller OFF, press
and hold 3 seconds,
displays INFO MODE.
BOIL OUT
FILL VAT FROM BULK

3000 CONTROLLER USER GUIDE
7
3000 Controller Menu Summary Tree
SCAN MODE
1 TEMPR
COOKS SINCE
LAST DISPOSE
COOKS TODAY
1 TIME
1 SENSITIVITY
1 ALARM TIME
EXIT
1 ALARM MODE
SHORT NAME
COOKS REMAINING
LONG NAME
1 ALARM TONE
HOLD TIME
1 ALARM NAME
INSTANT ON
FILTER PROMPT
NOTE: Numbered items
(such as 1 TIME) may
have multiple entries.

3000 CONTROLLER USER GUIDE
8
Main Menu: Programming your Fryer
The main menu is used to access the setup options to program the 3000 controller for
your fryer.
Main Menu: Navigation
Turn the controller off and follow the steps below to scroll to the function you wish
to enter: PRODUCT SETUP, VAT SETUP, or TECH MODE.
NOTE: Press to return to main menu at any time during the set up process. Press
twice to return to OFF.
Left Display
Right Display
Action
OFF
OFF
1. Press about 10 seconds until controller displays MAIN MENU.
Press EXIT/SCAN to return to OFF.
MAIN MENU
[BLANK]
2. Main Menu will flash, then go to PRODUCT SETUP.
PRODUCT
SETUP
[BLANK]
3. Press to enter PRODUCT SETUP to program menu items and
cooking parameters.
OR
Press to scroll to VAT SETUP.
[BLANK]
4. Press to enter VAT SETUP.
OR
Press to scroll to TECH MODE.
TECH MODE
[BLANK]
5. Press to enter TECH MODE to program technical features.
OR
Press to scroll to EXIT.
EXIT
EXIT
6. Press to return the controller to OFF.

3000 CONTROLLER USER GUIDE
9
Main Menu: Product Setup –Single Setpoint Cooking
(Same temperature throughout cook)
Controller default is single setpoint cooking.
To program menu items, make sure the controller is OFF and follow the steps below.
NOTE: Exit from a programming step at any time by pressing until the display returns to its
pre-programming status. A press is needed in order to lock in the programming choice.
NOTE: In full frypots, blue button products will cook in the left display(s), white button products
will cook in the right display(s). To unassign a product from a button, set the cook time to 0:00
and press .
Left Display
Right Display
Action
OFF
OFF
1. Press/hold about 10 seconds until PRODUCT SETUP is displayed.
MAIN MENU will flash before displaying PRODUCT SETUP.
PRODUCT
SETUP
[BLANK]
2. Press to program menu items and cooking parameters.
PRODUCT
SETUP
ENTER CODE
3. Enter 1650.
SELECT
PRODUCT
[BLANK]
4. Press desired product button.
LONG NAME
PRODUCT NAME
OR BUTTON
NUMBER
5. Enter 8 character product name with text keys. Move cursor from letter to
letter with forward one letter or back one letter. This name will
alternate in the display window with the cook time during a cook (full
frypot).
6. Press to advance to next product set up feature or to move back
one product set up feature.
SHORT
NAME
ABBREVIATED
PRODUCT NAME
OR BUTTON
NUMBER
7. Enter abbreviated 4-character product name with the text keys. This name
will alternate in the display window with the cook time during a cook (split
frypot).
8. Press to advance.
COOKING
MODE
SINGLE
SETPOINT
9. Press to advance. (Default is SINGLE SET-POINT
10. NOTE: If multiple setpoint (segmented) cooking is desired, press
MULTIPLE. Then go to MULTIPLE SETPOINT (SEGMENTED) product
setup and follow the instructions
1 TIME
0:00 OR
PREVIOUSLY
ENTERED TIME
11. Enter total cook time with numbered keys.
12. Press to advance.
1 TEMPR
TEMP
13. Enter cooking temperature.
14. Press to advance.
1
SENSITIVITY
NUMBER
15. Enter the level of sensitivity, 0-9, for the product. Sensitivity is the
likelihood that the cook time will have to stretch to compensate for product
variation (condition and/or weight).
16. Press to advance.

3000 CONTROLLER USER GUIDE
10
Left Display
Right Display
Action
1 ALARM
TIME (SHAKE
TIME)
0:00 OR
PREVIOUSLY
ENTERED TIME
17. Enter time in cook cycle for audible alarm for shaking or stirring.
(e.g. 30 second SHAKE into a 3 minute COOK would be entered :30).
If set to 0:00, skip to FILTER PROMPT.
18. Press to advance.
1 ALARM
NAME
SHAKE
19. Press to scroll to choice of alarm names. (Default is SHAKE).
20. Press to advance.
1 ALARM
MODE
AUTO
21. Press (Default is AUTO) Cancels alarm automatically after a
few seconds.
22. If MANUAL is desired press to scroll to MANUAL (requires user
to turn off alarm).
23. Press to advance.
1 ALARM
TONE
SHORT
24. Press to scroll to choice of shake alarm tones. (Default is
SHORT).
25. Press to advance.
2 ALARM
TIME
0:00
26. Enter time in cook cycle for second alarm for shaking or stirring. Leave at
0:00 if second alarm is not needed.
27. Press to advance.
FILTER
PROMPT
0 OR
PREVIOUSLY
ENTERED
NUMBER.
28. Enter number of cooks before a filter prompt. (Default is “0”) so filter
prompting is not associated with number of cook cycles.
29. Press to advance.
INSTANT ON
5 OR
PREVIOUSLY
SET NUMBER
30. Enter value. Press to advance. (Default is 5 seconds on pre-
programmed products).
31. This is the time, in seconds, the fryer heats at 100%, after the product
button is pressed, before the controller adjusts the heat in response to the
temperature.
HOLD TIME
0:00 OR
PREVIOUSLY
ENTERED TIME.
32. Enter time to hold product before discarding (Default is 0 seconds).
33. In Standard mode, the timer runs in the background but cancels when a
new cook is started on that product button. Controller can count down
holds from 8 different product buttons at the same time.
34. In Lane mode (selected in TECH MODE), the timer counts down in the
display screen but cancels when a new cook is started in that lane.
Controller counts down one hold per cooking lane.
35. Press to advance.
EXIT
EXIT
36. Press button to lock in programming choices and continue with
additional product programming (#37 page 9).
SELECT
PRODUCT
[BLANK]
37. Press 2 times to return to OFF.
NOTE: To unassign a product from a button, set the cook time to 0:00 and press EXIT/SCAN.

3000 CONTROLLER USER GUIDE
11
Main Menu: Product Setup –Multiple Setpoint (Segmented)
Cooking (More than one temperature throughout cook).
If not cooking products at more than one temperature throughout the cook, skip
to page 16, MAIN MENU.
Overview
The 3000 controller is capable of multiple setpoint (segmented) cooking, a feature that allows a cooking
cycle to be broken into a number of smaller cook cycles, each with its own cooking temperature and time.
An abbreviated version of the programming for a 13-minute cook cycle with four cooking temperatures is
shown below.
STEP 1
Set total cook time and initial setpoint.
STEP 2
Set the time of the first cooking segment, (2 minutes) and the setpoint of the first
temperature change.
STEP 3
Set the duration of the second cooking segment (4 minutes) and the setpoint of the
second temperature change.
STEP 4
Set the duration of the third cooking segment (3 minutes) and the setpoint of the third
temperature change.
The four remaining minutes in the cook time elapse at the final temperature. No entry is
required to use the final minutes
EXAMPLE: Total cook time of 13 minutes, with 3 temperature changes.
1. Start with total cook time of 13. Cook for 2 minutes at 340 until timer is at 11.
2. Cook for 4 minutes at 320 until timer is at 7
3. Cook for 3 minutes at 330 until timer is at 4.
4. Cook last 4 minutes at 330.
Cook
for How
Long?
Then Change to
What Temp?
Enter this number for
temp change
Time Remaining in Cook Cycle
Enter this number for point in cycle to change temp
[subtract desired cook time from total time remaining]
STEP 1
Initial setpoint of 340
Total cook time of 13 minutes
STEP 2
2 minutes
320
11 minutes [13 –2]
STEP 3
4 minutes
310
7 minutes [11-4].
STEP 4
3 minutes
330
4 minutes [7-3]
4 minutes
No entry–product
continues to cook at 330
until DONE
No entry–product finishes cooking at last setting

3000 CONTROLLER USER GUIDE
12
Enter 13:00, the combined time of all cook cycles, and 340°F (171°C),
initial setpoint.
1:
2 min.
2:00 4:00 6:00 8:00 10:00 12:00
4 min. 3 min. 4 min.
No entry is required
for the final 4 minutes
of the cook time. The
computer simply
counts downs the
remaining minutes at
the final setpoint,
which was
established in step 4.
2: 3:
4:
0
1 4
2
3 5 6 7 8 9 10 11 12 13
Remaining cook
time
Minus segment
length
Entered on
3000
13
-2
11
Remaining cook
time
Minus segment
length
Entered on
3000
11
-4
7Remaining cook
time
Minus segment
length
Entered on
3000
7
-3
4
Enter
320°F(160°C),
the first
temperature
change.
Enter
310°F(154°C),
the 2nd
temperature
change. Enter
330°F(166°C),
the 3rd
temperature
change.
340°F(171°C)320°F(160°C)310°F(154°C)330°F(166°C)
There can be a total of ten (10), cooking segments.

3000 CONTROLLER USER GUIDE
13
Multiple Setpoint (Segmented) Cooking Setup
1. Set Up Product
Left Display
Right Display
Action
OFF
OFF
1-1. Press checkmark key until Product Setup is displayed.
MAIN MENU will flash before displaying PRODUCT SETUP.
PRODUCT
SETUP
[BLANK]
1-2. Press to program menu items and cooking parameters.
PRODUCT
SETUP
ENTER CODE
1-3. Enter 1650
SELECT
PRODUCT
[BLANK]
1-4. Press desired product button
LONG NAME
PRODUCT
NAME OR
BUTTON
NUMBER
1-5. Enter 8 character product name with text keys. Move cursor
from letter to letter with forward one letter or back
one letter. This name will alternate in the display window
with cook time during a cook (full frypot).
1-6. Press to advance to next product set up feature or
to move back one product setup feature.
SHORT NAME
ABBREVIATED
PRODUCT
NAME OR
BUTTON
NUMBER
1-7. Enter abbreviated 4-character product name with text keys.
This name alternates with time in the display during a cook.
Press to advance.
2. Enter Total Cook Time and Starting (1st) Temp
COOKING
MODE
SINGLE
SETPOINT
2-1. Press . If multiple setpoint cooking desired press
MULTIPLE SETPOINT and follow the instructions. (Default is
SINGLE SETPOINT)
1 TIME
0:00 OR
PREVIOUSLY
ENTERED
TIME
2-2. Enter total cook time for segmented item and press to
advance.
1 TEMP
TEMP
2-3. Enter initial cooking temperature and press to advance.
1 SENSITIVITY
NUMBER
2-4. Enter the level of sensitivity, 0-9, for the product. Sensitivity is
the likelihood that the cook time will have to stretch to
compensate for product variation (condition and/or weight).
Press to advance.

3000 CONTROLLER USER GUIDE
14
3. Enter 2nd Temp and Time Remaining
2 TIME
0:00 OR
PREVIOUSLY
ENTERED TIME
3-1. Enter time remaining after first temperature change (see page
12) and press to advance.
2 TEMP
0:00 OR
PREVIOUSLY
ENTERED
TEMPERATURE
3-2. Enter first temperature change and press to advance.
2 SENSITIVITY
0 OR
PREVIOUSLY
ENTERED
VALUE
3-3. Enter the level of sensitivity, 0-9, for the product and press
to advance.
4. Enter 3rd Temp and Time Remaining
3 TIME
0:00 OR
PREVIOUSLY
PROGRAMMED
TIME
4-1. Enter time remaining after second temperature change and
press to advance.
3 TEMP
0:00 OR
PREVIOUSLY
PROGRAMMED
TEMPERATURE
4-2. Enter temperature of the second segment and press to
advance.
3 SENSITIVITY
0 OR
PREVIOUSLY
ENTERED
VALUE
4-3. Enter the level of sensitivity, 0-9, for the product and press
to advance.
5. Enter 4th Temp and Time Remaining
4 TIME
0:00 OR
PREVIOUSLY
ENTERED TIME
5-1. Enter time remaining after third temperature change and
press to advance.
4 TEMP
0:00 OR
PREVIOUSLY
PROGRAMMED
TEMPERATURE
5-2. Enter temperature of the third segment and press to
advance.
4 SENSITIVITY
0 OR
PREVIOUSLY
ENTERED
VALUE
5-3. Enter the level of sensitivity, 0-9, for the product and press
to advance.

3000 CONTROLLER USER GUIDE
15
6. End Temp Changes or Repeat Step 5 if needed
5 TIME
0:00 OR
PREVIOUSLY
ENTERED TIME
6-1. Leave at zero if no more segments are needed and press
to select and advance. If more segments are needed,
continue programming as shown in Step 5 for a
maximum of 10.
7. Create 1st Shake Alarm
1 ALARM TIME
0:00 OR
PREVIOUSLY
ENTERED TIME
7-1. Enter time in cook cycle for audible alarm for shaking or
stirring (e.g. 30 second SHAKE into a 3-minute COOK would
be entered 0:30). Press to advance.
1 ALARM NAME
SHAKE
7-2. Press to scroll to choice of alarm names.
(Default is SHAKE).
7-3. Press to advance.
1 ALARM
MODE
AUTO
7-4. Press to scroll to confirm Auto or Manual
shake alarm mode. (Default is AUTO).
Press to advance.
1 ALARM TONE
SHORT
7-5. Press to scroll to choice of shake alarm tones.
(Default is SHORT). Press to advance.
8. Create 2nd Shake Alarm
2 ALARM TIME
0:00 OR
PREVIOUSLY
ENTERED TIME
8-1. Enter time in cook cycle for a second audible alarm for
shaking. Press to advance. If time left at 0:00, menu will
advance to Step 10.
2 ALARM NAME
SHAKE
8-2. Press to scroll to choice of alarm names.
(Default is SHAKE).
8-3. Press to advance.
2 ALARM MODE
AUTO
8-4. Press to scroll to confirm Auto or Manual
shake alarm mode. (Default is AUTO).
Press to advance.
2 SHAKE
ALARM TONE
SHORT
8-5. Press to scroll to choice of shake alarm tones.
(Default is SHORT). Press to advance.

3000 CONTROLLER USER GUIDE
16
9. Create 3rd Shake Alarm
3 ALARM TIME
0:00 OR
PREVIOUSLY
ENTERED TIME
9-1. Enter time for third audible alarm for shaking.
Press to advance.
3 ALARM NAME
SHAKE
9-2. Press to scroll to choice of alarm names.
(Default is SHAKE).
9-3. Press to advance.
3 ALARM MODE
AUTO
9-4. Press to scroll to confirm Auto or Manual shake
alarm mode. (Default is AUTO). Press to advance.
3 SHAKE
ALARM TONE
SHORT
9-5. Press to scroll to choice of alarm tones. (Default is
SHORT). Press to advance.
10. Set Filter Prompt, Instant ON, and HOLD
FILTER
PROMPT
0 OR
PREVIOUSLY
ENTERED
NUMBER.
10-1. Enter number of cook cycles before a filter prompt. (Default is
“0”) so filter prompting is not associated with number of cook
cycles.
Press to advance.
INSTANT ON
5 OR
PREVIOUSLY
ENTERED
NUMBER
10-2. Enter value. Press to advance. (Default is 5 seconds on
pre-programmed products).
10-3. This is the time, in seconds, the fryer heats at 100%, after the
product button is pressed, before the controller adjusts the
heat in response to the temperature.
HOLD TIME
0 OR
PREVIOUSLY
ENTERED TIME
10-4. Enter time to hold product before discarding. Press to
advance. See page 10.
11. Exit or Set Up Additional Products
EXIT
EXIT
11-1. Press the button to lock in programming choices and
continue with additional product programming. (1-2, page 13).
SELECT
PRODUCT
[BLANK]
11-2. Press 2 times to return to OFF.

3000 CONTROLLER USER GUIDE
17
Main Menu: Vat Setup
To program the Vat Setup, make sure the controller is OFF and follow the steps below.
Vat Setup mode allows the controller to be set for language displays, vat sizes, and
temperature range displays.
NOTE: Global system settings are only available on the far left controller. Individual vat setup
choices are available on the individual vat controller.
1. Enter Vat Setup
Left Display
Right Display
Action
OFF
OFF
1-1. Press and hold for about 10 seconds until the controller
displays Main Menu changing to PRODUCT SETUP.
(Product Setup is described on page 9.)
PRODUCT
SETUP
[BLANK]
1-2. Press to scroll to VAT SETUP and press .
VAT SETUP
ENTER CODE
1-3. Enter 1656.
2. Vat Set-Up: System
(Most of the system choices are only available on the far left controller)
SYSTEM
[BLANK]
2-1. SYSTEM shows in left display. Press to enter System Setup.
Note: Pressing will scroll to TIME/DATE *, DST SETUP *, FILTER,
E-LOG, or CHANGE PASSWORD. * Global Settings
LANGUAGE
(Global)
ENGLISH
2-2. Press to scroll to choice and press to advance (Default is
ENGLISH). Far left controller only.
2ND
LANGUAGE
(Global)
SPANISH
2-3. Press to scroll to choice and press to advance. (This option
allows another display language to be selected –ex. Spanish as a
second language). (Default is SPANISH). Far left controller only.
LOCALE
(Global)
NON-CE
2-4. Press to scroll to choices: Non-CE (non-European standards),
CE Belgium, or CE (European Conformity standards) (Default is NON-
CE). Press to advance. Far left controller only.
ENERGY
(Global)
ELEC
2-5. Press to scroll to choices: Gas or Electric.
Press to advance. Far left controller only.
TYPE
(Global)
EL30-14
FULL
2-6. Press to scroll choices: Gas: GL30 Full, GL30 Split, GL30 Full
Quick, or GL30 Split Quick; Electric: EL30-14 Full, EL30-14 Split,
EL30-17 Full, or EL30-17 Split. With the current fryer vat type
displayed, press to advance. Far left controller only.
SYSTEM
VOLUME
(Global)
5
2-7. Sets sound level for controller. Enter level, 0-9 (0=Off/ 9=Loudest)
(Default is 5). Press to advance. Far left controller only.

3000 CONTROLLER USER GUIDE
18
SYSTEM
TEMPR
FORMAT
(Global)
F
2-8. Press to scroll choices: F for Fahrenheit; C for Celsius (Default
is set at factory).
Press to advance. Far left controller only.
EXIT MELT
TEMPR
(Global)
180ºF (82 ºC)
2-9. Use numbered keys to select a temperature from 100° F (38° C) to
180° F (82° C) (Default is 180°F) (82°C).This is the temperature for the
fryer to exit the melt cycle.
Press to advance. Far left controller only.
COOL
MODE
TEMPR
(Global)
250°F (121 ºC)
2-10. Use numbered keys to select a setback temperature. (Default is 250°F)
(121°C). This is the temperature during cool mode.
Press to advance. Far left controller only.
COOL
MODE
DEFAULT
0
2-11. Use numbered keys to select a number of minutes the frypot sits idle
before going to cool mode. (Default is 0, disabling this feature).
Press to advance.
FRESH OIL
(Global)
NONE
2-12. Press to scroll choices NONE, BULK, JIB. (Default is set at
factory).
Press to advance. Far left controller only.
WASTE
(Global)
NONE
2-13. Press to scroll choices NONE, BULK. (Default is set at factory).
Press to advance. Far left controller only.
DRAIN
SWITCH
(Global)
YES
2-14. Press to scroll choices YES and NO. Press to advance
(Default is set at factory). Far left controller only.
RECOVERY
ALARM
(Global)
DISABLED
2-15. Press to scroll choices DISABLED and ENABLED. This is an
alarm that locks out the fryer if it does not heat properly (Default is
DISABLED).
Press to advance. Far left controller only.
BASKET
LIFT
(Global)
ENABLED
2-16. This feature only applies to units that have basket lifts.
Press to scroll choices DISABLED and ENABLED. (Default is
ENABLED).
Press to advance. Far left controller only.
HOLD TIME
AUTO
2-17. Press to scroll choices AUTO and MANUAL. (Default is AUTO).
Cancels alarm automatically after a few seconds.
Press to advance.
EXIT
EXIT
Press button to lock-in the vat set-up and to return the controller to OFF.
3. Vat Set Up: Time/Date
NOTE: Global system settings are only available on the far left controller.
OFF
OFF
3-1. Press until PRODUCT SETUP is displayed.
PRODUCT
SETUP
[BLANK]
3-2. Press to scroll to VAT SETUP and press .

3000 CONTROLLER USER GUIDE
19
VAT SETUP
ENTER
CODE
3-3. Enter 1656.
SYSTEM
[BLANK]
3-4. Press to scroll to TIME/DATE.
TIME/DATE
(Global)
[BLANK]
3-5. Press to advance. Far left controller only.
TIME
ENTRY
(Global)
TIME
3-6. Use numbered keys to change time in 24 hour format.
Press to advance. Far left controller only.
DATE
FORMAT
(Global)
MM/DD/YY
3-7. Press to scroll choices. With the date format displayed, press
to advance. Far left controller only.
ENTER
DATE
(Global)
DATE
3-8. Use numbered keys to change date.
Press to advance. Far left controller only.
EXIT
EXIT
3-9. Press button once and press to scroll to DST SETUP *, FILTER,
E-LOG, CHANGE PASSWORD, EXIT, SYSTEM*, or TIME/DATE *. With
desired choice displayed, press to advance or press 3 times to
return the controller to OFF. *Global Far left controller only.
4. Vat Set Up: DST Set Up (Daylight Savings Time)
In the U.S., Daylight Savings Time begins each year at 2:00 a.m. on the second
Sunday in March, with clocks moving ahead one hour.
TIME/DATE
(Global)
4-1. Press until you have scrolled to DST SETUP *.
DST SETUP
(Global)
4-2. Press to advance.
DST
(Global)
ENABLED
4-3. Press to scroll to choices ENABLED and DISABLED. (Default is
ENABLED). Press to advance. Far left controller only.
DST START
MONTH
(Global)
3
4-4. Use numbered keys to program month. (Default is U.S. Standard: Month
“3”). Press to advance. Far left controller only.
DST START
SUNDAY
(Global)
2
4-5. Use numbered keys to program week of the month (1-5 weeks). (Default
is U.S. Standard: Sunday “2”).
Press to advance. Far left controller only.
DST END
MONTH
(Global)
11
4-6. Use numbered keys to program month. (Default is U.S. Standard: Month
“11”). Press to advance. Far left controller only.
DST END
SUNDAY
(Global)
1
4-7. Use numbered keys to program week of the month (1-5 weeks). (Default
is U.S. Standard: Sunday “1”).
Press to advance. Far left controller only.
EXIT
EXIT
4-8. Press button once to lock in the Daylight Savings Time setup and
press to scroll to FILTER, E-LOG, CHANGE PASSWORD, EXIT,
SYSTEM*, TIME/DATE *, or DST SETUP *. With desired choice
displayed, press to advance or press 3 times to return the
controller to OFF. Far left controller only.

3000 CONTROLLER USER GUIDE
20
NOTE: Daylight savings time ends each year at 2:00 a.m. on the first Sunday in November with clocks
moving back one hour. For the U.S. states and international locations that do not use DST,
this set-up feature can be disabled.
5. Vat Set Up: Filter
DST SETUP
5-1. Press until you have scrolled to Filter.
FILTER
[BLANK]
5-2. Press to advance.
COOKS
TILL
FILTER
0
5-3. Use numbered keys to select a number of cooks that occur before a filter
prompt. (Default is 0), so filter prompting is not associated with number
of cooks. Press to advance.
EOD
FILTER
TIMER
DISABLED
5-4. Press to scroll choices ENABLED and DISABLED. (Default is
DISABLED). There will be no automatic prompt for end of the day
filtering. Press to advance.
EOD
FILTER
TIME
23:59
5-5. Use numbered keys to program end of day filter alert time. Enter time in
24-hour format (Default is 23:59) so filter prompting is not associated
with an end of day prompt.
Press to advance.
FLUSHING
TIMER
5
5-6. Use numbered keys to select the number of minutes oil will circulate
through the filter in Clean and Filter. (Default is 5 minutes).
Press to advance.
BOIL OUT
TIMER
30
5-7. Use numbered keys to select the number of minutes for the boil out
soak. (Default is 30 minutes).
Press to advance.
1 POLISH
TIMER
DISABLED
5-8. Press to scroll choices ENABLED and DISABLED. (Default is
DISABLED). There will be no automatic prompt for polishing during the
day.
Press to advance.
1 POLISH
PROMPT
TIME
23:59
5-9. Use numbered keys to program polish alert time. Enter time in 24-hour
format. This is the time the polish prompt will occur each day if polish
timer is ENABLED. (Default is 23:59) so polish prompting is not
associated with an end of day prompt.
Press to advance.
1 POLISH
DURATION
15
5-10. If polishing, use numbered keys to select number of minutes to polish
(Default is 15 minutes).
Press to advance.
1 POLISH
START
TEMPR
300F
(149°C)
5-11. Use numbered buttons to select a minimum temperature required for a
polish to begin. (Default is 300° F).
Press to advance.
EXIT
EXIT
5-12. Press button to lock-in the filter setup and return the controller to
OFF.