Fuji Xerox DocuPrint M225 z User manual

Unpack the machine and check the components
Read the Safety Guide first, then read this Quick Setup Guide for the correct installation
procedure.
NOTE:
• The components included in the box and the AC power plug may differ depending on your
country.
• The illustrations in this Quick Setup Guide are based on the DocuPrint M225 z.
• The USB cable is a standard accessory.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Remove the packing materials and install the toner cartridge
Load paper in the paper tray
Connect the machine to your computer/mobile device
Connect the power cord and turn on the machine
Select your language (If needed)
(Only for certain models)
A
Drum Unit
(Pre-installed)
AC Power Cord
(only for certain
models)
Quick Setup Guide CD‑ROM
B
USB Interface Cable Inbox Toner
Cartridge
Telephone Line Cord Safety Guide Basic User's Guide
1. (DocuPrint M225 dw)
a. Press Menu.
b. Press ▲ or ▼ to display General Setup, and then press OK.
c. Press ▲ or ▼ to display Local Language, and then press OK.
(DocuPrint M225 z) Press Menu, 0, 0.
2. Press ▲ or ▼ to select your language, and then press OK.
3. Press Stop/Exit.
A
B
B
A
A
B
3
5
2
6
1
• Windows®PC with a CD-ROM drive, go to step 6A
• Windows®PC without a CD-ROM drive, go to step 6B
• Macintosh, go to step 6B
• Mobile device users with a WPS/AOSS™-supported access point/router, go to step 6C
Back Front
Select your country/language
(Initial setup only)
After turning on the machine, you may be required to set your
country or language (depending on your machine).
If required, follow the on-screen instructions.
4
Remove the orange part. Remove the orange part.
Adjust the paper guides.
Quick Setup Guide
DocuPrint M225 dw / DocuPrint M225 z
LEV122001-00
604E 77670 MB3555E2-1 (Edition 1)
October 2014
Copyright © 2014 by Fuji Xerox Co., Ltd.
Fuji Xerox Co., Ltd. Printed in Vietnam

Configuration using the CD-ROM (Windows®)
Follow the on-screen
instructions until the
Connection Type screen
appears.
Finish
6A
Download the full driver and software package by visiting the Fuji Xerox website at http://www.fujixeroxprinters.com/.
After you download the driver and software package, follow the on-screen instructions until the Connection Type screen appears. Refer to 6A Configuration using the CD-ROM
(Windows®).
If your wireless LAN access point/router supports automatic wireless (one-push) setup (WPS/AOSS™), you can set up your machine without using a computer.
Connection Type
For USB Connection
For Wired Network Connection
Connect a network cable first.
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
Follow the on-screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
One-push wireless setup for mobile devices (Wireless models only)
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Follow the on-screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
Configuration without using the CD-ROM (Windows®without CD-ROM drive or Macintosh)
6C
6B
Finish
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Press the WiFi button on your machine.
Wireless setup is now complete.
NOTE:
If the Fuji Xerox screen does not appear automatically, go to Computer.
(For Windows®8: click the (File Explorer) icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then double-click start.exe.
604E 77670 MB3555E2-1 LEV122001-00