Fuji Xerox DocuPrint P268 d User manual

Unpack the machine and check the components
Read the Safety Guide first, then read this Quick Setup Guide for the correct installation
procedure.
NOTE:
The USB cable is a standard accessory.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Remove the packing materials and install the toner cartridge
Load paper in the paper tray
Connect the power cord and turn on the machine
A
Drum Unit
(Pre-installed)
USB Interface Cable Quick Setup Guide
B
Inbox Toner Cartridge CD‑ROM Safety Guide
A
B
B
A
A
B
3
2
1
Adjust the paper guides.
Remove the orange part. Remove the orange part.
Insert the paper with the print side face-up.
Quick Setup Guide
DocuPrint P268 d / DocuPrint P268 dw
ME7184E3-1 (Edition 1)
October 2014
Copyright © 2014 by Fuji Xerox Co., Ltd.
Fuji Xerox Co., Ltd.

Configuration using the CD-ROM (Windows®)
Follow the on-screen
instructions until the
Connection Type screen
appears.
Finish
4A
Download the full driver and software package by visiting the Fuji Xerox website at http://www.fujixeroxprinters.com/.
After you download the driver and software package, follow the on-screen instructions until the Connection Type screen appears. Refer to 4A Configuration using the CD-ROM
(Windows®).
Connection Type
For USB Connection
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
Follow the on-screen
instructions to continue
installation.
Configuration without using the CD-ROM (Windows®without CD-ROM drive or Macintosh)
4B
NOTE:
If the Fuji Xerox screen does not appear automatically, go to Computer.
(For Windows®8: click the (File Explorer) icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then double-click start.exe.
For Wired Network Connection
Connect a network cable first.
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Follow the on-screen
instructions to continue
installation.
Finish
If your wireless LAN access point/router supports automatic wireless (one-push) setup (WPS/AOSS™), you can set up your machine without using a computer.
One-push wireless setup for mobile devices (Wireless models only)
5C
Wireless setup is now complete.
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Press the WiFi button on your machine.