Fujikura One-Click Cleaner LC PRO User manual

One-Click®Cleaner LC PRO Handbook
Thank you for choosing the One-Click®Cleaner LC PRO.TheOne-Click®Cleaner LC PRO is a
high-performance device designed for cleaning the ferrule end face of LC connectors. Please
carefully read this Handbook before using this device.
Though our device is deemed safe, improper usage or handling can still inflict injury to others.
One-Click®Cleaner LC PRO is designed to clean LC Connector. Fujikura Ltd. is not liable for
damage caused in attempt to apply this device to other applications.
2. Notes on usage
Do not attempt to disassemble as this can cause damage to the device and void warranty.
Do not re-use cleaning cloth as this will eliminate its cleaning ability.
Do not touch the cleaning cloth as this will cause contamination.
Do not pull the cleaning cloth, use only the device body.
Do not use this cleaner when the cloth is empty, as this can cause damage to the connector.
3. Notes on storage for extended periods
Do not expose device to direct sunlight, high temperature or high humidity.
The dust cap should be closed at all times when device is not in use.
B. Outer Nozzle
C. Outer Shell
A. Dust Cap
E. Indicator
1. Safety precautions
F. Inner Nozzle
D. Strap Hole
4. Device construction
Identification of remaining cloth
G. Lock Button
Standard Mode Extended Mode
No. PartName Function
A DustCap Actsasthecap
B OuterNozzle Alignsthecleaningclothtotheconnectorendfacewhencleaningthroughthe
connectoradapter.
C OuterShell Housescleaningclothandpushedforwardtocleantheconnector.
D StrapHole Canbeusedtoattachastraptothecleaner(strapnotincluded).
E Indicator Providesindicationofremainingcleaningcloth.
F InnerNozzle Alignsthecleaningclothtotheconnectorendfacewhencleaningtheconnector
plug.
G LockButton Pushthebuttontoextendandcontractthenozzle.
One-Click®is trade mark of Fujikura Ltd.
Full
Little
Empty
View of Indicator
Cloth
(White)
Cloth
(White)
Bobbin
(Red)
Bobbin
(Red)
DCML-10154(3)

5. Applications
<Connector inside adapter> <Connector plugs alone>
1. Remove Dust Cap from device
2. Insert Outer Nozzle of cleaner
into LC Adaptor.
3. Push the Outer Shell to start cleaning the target connector end face. A “click” sound indicates end of
cleaning process. Please attach the Dust Cap after use.
Be careful not to slant the One-Click®Cleaner LC PRO while inserting into the Adapter / Plug.
Do not overly exert force during insertion as this may cause damage to both the connector and the
One-Click®Cleaner LC PRO.
2. Insert the LC connector into the Inner
Nozzle.
Copyright © 2023 Fujikura Ltd. All rights reserved.
Standard Mode Extended Mode
Outer Nozzle
Click !!
Push straight
Click !!
Push straight
LC Adaptor
DCML-10154(3)
LC Plug
Inner Nozzle