IPC CT15R User manual

19
PLDC03804
IP Cleaning S.p.A. - Viale Treviso, 63 30026 Summaga di Portogruaro - www.ipcworldwide.com
CT15R CARPET KIT, Quick Guide
This Guide is intended for quick consultation only and does not replace the Use and Maintenance Manual. Before using the machi-
ne, read the Use and Maintenance Manual contained in the machine packaging thoroughly and rigorously respect all the instruc-
tions.
PREPARATION/OPERATION
Fill the detergent tank.
Adjust the slope of the handle by pulling
the handle release lever.
Open the detergent tank tap.
Remove the cap for STANDARD opera-
tion from its housing, and replace it with
the cap for CARPET KIT operation.
Release the two squeegee supports from
their housing and remove them.
Insert the Carpet Kit carpet cleaner in the
front housing, attaching it to the support.
Turn the selector to the Carpet position
Press the ON-OFF button, then press
the brush button to activate suction and
water delivery.
Activate the drive lever. To enable high
pressure delivery (battery version only),
with the brush already operating, press
and hold the H2O button until the LED
starts ashing.
Start working; the machine must be used
in reverse gear.
CARPET-
LAVAMOQUETTE
STANDARD

20
PLDC03804
IP Cleaning S.p.A. - Viale Treviso, 63 30026 Summaga di Portogruaro - www.ipcworldwide.com
CT15R CARPET KIT, Quick Guide
Clean the dirty water tank.
DAILY MAINTENANCE Check the detergent output lter is unda-
maged and clean.
Check the dirty water tank oat is unda-
maged and clean and moves freely on
the pin.
Clean the brush.
To recharge the batteries, plug in the
battery charger, using the extension
provided with the machine.
AUTOMATIC BRUSH ATTACHMENT
Mounting the brush:
switch the machine off, unplug the cable version from the power socket; raise the front of the machine by hand; with the other hand,
insert the brush and push it upwards until it clicks into position.
Removing the brush:
switch the machine off, unplug the cable version from the power socket; raise the front of the machine by hand; with the other hand,
remove the brush by pulling it downwards; lower the machine.