Fujitsu UTZ-KXRA User manual

Insulation kit for high humidity PART No. 9379022071-03
Parts and accessories
The following installation parts are furnished. Use them as required.
When applying to indoor units shorter than the insulation parts, cut the shaded portion of Ins cabinet A to E as follows.
For authorized service personnel only.
Attach the Ins cabinet E onto the outside of the
indoor unit.
At this time, make sure that there is no gap among
the surrounding heat insulator.
Attach the Ins top plate A, B, and C without any gap.
INSTALLATION MANUAL
4
3
UTZ-KXRA
Note: Before installation, please check the shape of the main product as shown in this manual, so that appropriate parts
and accessories are used.
WARNING
When installing the Insulation kit for high humidity, please read this manual thoroughly.
Before installation, be sure that all sources of power have been shut off. There is a danger of electric shock.
When installing the Insulation kit for high humidity, please refer to the operating manual and installation manual sup-
plied with the indoor unit.
Align the slits of Ins cabinet A, B, C and D to the related hooks, and then attach onto the outside of the indoor unit.
2
AIR CONDITIONER
OPTIONAL PARTS Attach the Ins cabinet C onto the outside of the indoor unit.
1
Ins cabinet C
Note:
When using the Distribution duct connecting port and Fresh
air inlet, please cut the insulation to fit the duct used (locally
purchased).
Name and Shape Q'ty Name and Shape Q'ty Name and Shape Q'ty
Installation manual
(This manual)
1
Ins cabinet A
Slit 1*
Ins top plate B
(33-3/4 in.)
858mm
2
Installation manual
1*
Ins cabinet B
Slit 1*
Ins top plate C
1
Ins cabinet A
Slit
Hole
1
Ins cabinet C
Slit
Slit
1*
Ins hook
4
Ins cabinet B
Slit
Hole 1
Ins cabinet D
Slit 1*
Ins hook
4*
Ins cabinet C
Slit
Slit
Hole
1
Ins cabinet E
(15-1/4 in.)
388mm
or 4
Insulation panel B
2*
Ins cabinet D
Slit
Hole 1
Ins top plate A
1
* Not used with this model. (Parts for this model are marked with white letters.)
Ins cabinet E × 4
Ins top plate A
Ins top plate B×2
Ins top plate C
Ins cabinet A
Slit
4 Places
Ins cabinet B
Ins cabinet C
Ins cabinet D
9379022071-03_IM_EN.indd 19379022071-03_IM_EN.indd 1 26/6/2017 AM 8:49:3326/6/2017 AM 8:49:33

After fixing the indoor unit, attach the Ins hook to the hook (4 places).
5
Hook
Push
Push
Bend
Insert
Ins hook × 4
4 Places
When installing the External input and output PCB box (option).
Remove the insulation (3 places) on the indoor unit.
After the PCB box and cable tie with clip is installed, replace the insulation (2 places) over the PCB box.
*For detailed information on installation, refer to the installation manual of the External input and output PCB box.
6
Insulation
PCB box
Insulation
Cable tie with clip
(Accessory of the PCB box)
9379022071-03_IM_EN.indd 29379022071-03_IM_EN.indd 2 26/6/2017 AM 8:49:3626/6/2017 AM 8:49:36