Fujitsu DESKPOWER 6000 Series User manual

DESKPOWER 6000/SS Series User’s Manual
Fujitsu endeavours to ensure that the information in this document is correct, but accepts no liability for any error
or omission in the same. Any procedures described in this document for operating Fujitsu products should be read
and understood by the operator before such products are used. To ensure that Fujitsu products function without
risk to safety and health, such procedures should be strictly observed by the operator. The development of Fujitsu
products and services is continuous and published information may not be up to date. Any particular issue of a
product may contain facilities not described herein. It is important to check the current position with Fujitsu.
Specifications and statements as to performance in this document are Fujitsu estimates intended for general
guidance. They may require adjustment in particular circumstances and should therefore not be taken as formal
offers or commitments.
DESKPOWER is a trademark of Fujitsu Limited. The following are registered trademarks of Microsoft Corporation:
MS, MS-DOS, Windows®NT, Windows®98, Windows®2000. Intel 810/810E, Celeron, Pentium II and III are the
registered trade mark of Intel Corporation. Phoenix and the Phoenix logo are registered trademarks of Phoenix
Technologies, Ltd. Intel®Pentiumwand MMX™ technology are trademarks of Intel Corporation.
All Rights Reserved. Copyright©Fujitsu Limited, 2000
The use of screens is permitted by Microsoft Corporation in the United States.
All other products are trademarks or registered trademarks of their respective companies.
All rights reserved. No part of this publication may be copied, reproduced, or translated without the prior written consent
of Fujitsu Limited. No part of this publication may be stored or transmitted in any electronic form without the written
consent of Fujitsu Limited.
DECLARATION OF CONFORMITY
according to FCC Part 15 Class B
Responsible Party Name : FPCA
Address : Fujitsu PC (Asia) Pte Ltd
200 Pandan Loop
#05-03, Pantech 21
The Computer Centre
Singapore 128388
Telephone : [phone]
Declares that product: Model : FPC-S80000
Complies with Part 15 Class B
of the FCC Rules.
This device complies with Part 15 Class B of the FCC Rules. Operations are subject to the following two conditions:
(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference
received, including interference that may cause undesired operation.
*00-Magus Intro 01/11/2000, 15:101

IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions carefully. Save these instructions for future reference.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing
serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to
ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should never be placed
near or over a radiator or heat register, or in a built-in installation unless proper ventilation is
provided.
7. This product should be operated from the type of power indicated on the marking label. If
you are not sure of the type of power available, consult your dealer or local power company.
8. This product is equipped with a 3-wire grounding-type plug, a plug having a third (grounding)
pin. This will only plug into a grounding-type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the purpose of the grounding-type plug.
9. Do not allow anything to rest on the power cord. Do not locate this product where persons
will walk on the cord.
10. If an extension cord is used with this product, make sure that the total ampere rating of the
equipment plugged into the extension cord does not exceed the extension cord ampere
rating. Also, make sure that the total rating of all products plugged into the wall outlet does
not exceed 15 amperes.
11. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
12. Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltage points or other risks. Refer all servicing to qualified service
personnel.
*00-Magus Intro 01/11/2000, 15:102

13. Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions since improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal condition.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a need for service.
14. CAUTION. When replacing the battery, be sure to install it with the polarities in the
correct position. There is a danger of explosion if the battery is replaced with an
incorrect type or is mistreated. Do not recharge, disassemble or dispose of in fire.
Replace only with the same or equivalent type recommeded by the manufacturer.
Dispose of the used battery according to the manufacturer’s instructions.
15. Use only the proper type of power supply cord set (provided in your accessories box) for this
unit. It should be a detachable type: UL listed/CSA certified, BS1363,ASTA,SS145 certified,
rated 10A 250V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6
meters).
*00-Magus Intro 01/11/2000, 15:103

■Greetings
We thank you for purchasing the Fujitsu DESKPOWER 6000/SS personal computer.
The DESKPOWER 6000/SS is a desktop-type personal computer with a space-saving design.
This manual explains how to use the hardware of the DESKPOWER 6000/SS.
Please read this manual carefully to ensure correct use of the PC.
This unit may malfunction if the power source is interrupted suddenly, for example, due to lightning.
Fujitsu recommends the use of an AC non-interruptible power supply unit.
(Based on guidelines for the prevention of sudden voltage interruptions by Japan Electronic
Industry Development Association (JEIDA).
This unit is class B information technology equipment based on the Voluntary Control Council for
Interference (VCCI) standard by Information Technology Equipment and may create interference
if used near radio or television receivers.
Use the unit in accordance with information provided in the manual.
This unit conforms to the Personal Computer Industry Standard (PC-11-1988) of the Japan
Electronic Industry Development Association (JEIDA).
This unit conforms to the harmonic guideline.
Because this product includes cargo based on the “Foreign Exchange and Foreign Trade
Control Act,” the export of this product may require permission in accordance with said act.
Fujitsu, who is a participant of the International Energy Star Program,
determines that this product conforms to the International Energy Star
Program Standard.
The International Energy Star Program is an international program for
promoting energy conservation of office equipment such as computers and
strives to develop and promote products capable of efficient energy use. This program is open
to all manufacturers, and the products to be developed include computers, displays, printers,
facsimiles, and copy machines. The same standard and markings ( ) are used among
participating countries.
The energy-saving function of this product, however, may not be applicable because of
limitations with the operating system (such as Windows NT).
*00-Magus Intro 01/11/2000, 15:104

■Conventions used in this manual
●Warning icons
Various icons and icon/word combinations are used in this manual to encourage users to use the
equipment so as to minimize personal risk and prevent property damage. The icons are explained
as follows. The user should be familiar with the icons before responding to the corresponding
instructions.
Indicates a hazardous situation that could result in fatal or serious wound
if the correct procedure is not applied.
Indicates a hazardous situation that could result in personal injury and/or
property damage if the correct procedure is not applied.
The following icons are also used with the above icon/word combinations to prevent personal injury
and/or property damage.
The icon that indicates the corresponding instruction is a warning.
The illustration displayed inside or beside the icon shows what the warning
actually means.
The icon that indicates the corresponding instruction is a banned action.
The illustration displayed inside or beside the icon shows what is actually
banned.
The icon ●that indicates the corresponding instruction is a command to
proceed. The illustration displayed inside or beside the icon shows what
to proceed.
●Representing keys and use thereof
In the text of the manual, keyboard keys are represented using only necessary characters as shown
below.
Example: [Ctrl] key, [Enter] key, and [→] key
When more than one key is to be pressed simultaneously, the keys are represented using “+”
between keys as shown below:
Example: [Ctrl] + [F3] and [Shift] + [↑]
●Representing buttons
Buttons displayed on the screen are enclosed in square brackets, [and], as shown below:
Example: [OK]
●Command entries
In the text of the manual, a command is represented as shown below:
diskcopy a: a:
↑↑
WARNING
CAUTION
Electric shock
*00-Magus Intro 01/11/2000, 15:105

A blank (shown with [↑]) between characters indicates that the [Space] key (long bar on the front
of the keyboard) is to be pressed once. Command names are represented in lowercase but may
be entered using uppercase letters.
●Conventions used in the text of the manual
The symbols used in the text of the manual have meanings as explained below:
Point indicates information necessary to run hardware or software.
Help indicates information explaining how to terminate an incorrect operation or
troubleshoot.
●Screen display examples
Screen displays provided in this manual are examples and may be different from those (including
file names) actually appearing on the display screen.
●Illustrations
Illustrations in this manual are an example using (mainly) the DESKPOWER 6000/SS
(CD-ROM drive-equipped model) and may be different from those actually appearing on your PC
screen depending on the model type and options installed.
●Referencing products
In this manual, products are described using abbreviations as listed below:
Windows 98 refers to Microsoft
®
Windows
®
98 operating system.
Windows Me refers to Microsoft
®
Windows
®
Millennium operating system.
Windows 2000 refers to Microsoft
®
Windows
®
2000 operating system.
Windows NT refers to Microsoft
®
Windows NT
®
Workstation operating system Version 4.0.
The terms “your PC,”“the PC,”“your PC main unit,”and “the PC main unit”refer to the DESKPOWER.
Point
Help
*00-Magus Intro 01/11/2000, 15:106

■Warning and caution labels
The PC bears warning and caution labels as shown below.
The warning and caution labels must not be removed or damaged.
Attention
115V of voltage switch in the power supply corresponds to
100-200V
230V of voltage switch in the power supply corresponds to
200-240V
WARNING
●Before mounting or dismounting an optional unit in/from your
PC, switch off the PC and all connected units and unplug all
power cords from respective outlets to prevent electric shock.
Before disassembling the unit and
installing a built-in option, switch off
the PC and all connected
peripherals and unplug all power
cords from respective outlets to
prevent electric shock.
WARNING
Electric shock
FUJITSU LIMITED
MADE IN JAPAN(J)
UL
FC
DESKPOWER
MODEL FPC-S80000
P/N CP070180-01
200-240V 1.75A 50/60Hz 100-120V 3.5A 50/60Hz
TN
LISTED
UL1850
7J61
*00-Magus Intro 01/11/2000, 15:107

Chapter 1Introduction
This chapter provides basic information on the PC, such as the names
and functions of individual parts, and also explains the basic operation
of the PC, such as turning the power on or off.
Chapter 2Hardware
This chapter provides basic information on how to handle the
components installed (or can be installed) on the PC.
Chapter 3Troubleshooting
This chapter explains how to respond to a problem occurring in the
PC.Read wherever applicable.
Chapter 4Technical Information
This chapter explains the specifications and other information relating
to this PC.
Manual configuration
*00-Magus Intro 01/11/2000, 15:108

Contents
CHAPTER 1 Introduction
1 Part Names and Functions ..............................................................2
Front of the PC unit .......................................................................................... 2
Back of the PC unit .......................................................................................... 4
Inside the PC unit ............................................................................................. 6
Motherboard ..................................................................................................... 7
2 Installation .........................................................................................8
Installation area ............................................................................................... 8
Mounting the feet ............................................................................................. 8
Example of installation ................................................................................... 11
Horizontal placement ..................................................................................... 11
3 Connection ......................................................................................12
Connecting the display, keyboard, mouse, and LAN cables .......................... 13
Connecting the power cable ........................................................................... 16
4 Turning On the Power .....................................................................18
Notes on power-on ......................................................................................... 18
Turning on the power ...................................................................................... 19
5 Turning Off the Power .................................................................... 20
Notes on power-off ......................................................................................... 20
Turning off the power ...................................................................................... 20
6 Resetting ......................................................................................... 23
Resetting the PC ............................................................................................ 23
7 CD ..................................................................................................... 25
Notes on handling .......................................................................................... 25
Inserting or removing a CD ............................................................................ 26
8 Floppy Disk .....................................................................................28
Notes on handling .......................................................................................... 28
Inserting or removing a floppy disk ................................................................ 28
9 Hard Disk ......................................................................................... 30
Notes on handling the hard disk ..................................................................... 30
10 Mouse .............................................................................................. 31
Using the mouse ............................................................................................ 31
CHAPTER 2 Hardware
1 Before Installing a Peripheral Device ............................................ 34
What are peripheral devices? ........................................................................ 34
Notes on handling .......................................................................................... 35
Location for installation .................................................................................. 36
Removing the upper cover ............................................................................. 37
*00-Magus Intro 01/11/2000, 15:109

2 Increasing the Memory Capacity................................................... 38
Location of memory modules ......................................................................... 39
Applicable memory modules .......................................................................... 39
Installing/removing memory modules ............................................................. 40
3 Installing Expansion Cards ............................................................ 44
Applicable expansion cards ............................................................................ 45
Installing an expansion card ........................................................................... 46
CHAPTER 3 Troubleshooting
1 Problems ......................................................................................... 50
CHAPTER 4 Technical Information
1 Maintenance of the Hardware ........................................................ 54
Maintenance of the PC unit ............................................................................ 54
Maintenance of the keyboard ......................................................................... 54
Maintenance of CDs ....................................................................................... 54
Maintenance of the mouse ............................................................................. 55
Cleaning of the floppy disk drive .................................................................... 56
2 Preventing Television or Radio Interference ................................ 57
3 Security of the Case ....................................................................... 58
4 Diagnostic Test of LAN Function ................................................... 59
5 Standard Specifications ................................................................. 60
Specifications of PC unit ................................................................................ 60
LAN adapter specifications ............................................................................ 61
Sound specifications ...................................................................................... 61
Connector specifications ................................................................................ 62
6 Other Precautions ........................................................................... 67
Disposal ......................................................................................................... 67
USB (Windows 95/98/2000/Me model) .......................................................... 67
USB keyboard (Windows 98 model) .............................................................. 67
Addition of LAN adapter ................................................................................. 68
Wake up On LAN ........................................................................................... 68
Precautions on using display ......................................................................... 68
Precautions on using analog LCD .................................................................. 68
Adjustment of analog display screen position ................................................ 68
Display of video memory capacity .................................................................. 68
Connection of display ..................................................................................... 68
Replacement of display .................................................................................. 69
Installation of core .......................................................................................... 70
Intel®processor serial number ....................................................................... 70
Power-saving function .................................................................................... 70
Peripheral devices/cables ............................................................................... 70
Mouse with scroll (wheel) function ................................................................. 70
*00-Magus Intro 01/11/2000, 15:1010

CHAPTER 1
Introduction
*01-Magus (01-17) 01/11/2000, 15:101

2
1 Part Names and Functions
This section explains the names and functions of the parts of the PC unit and the motherboard.
■Front of the PC unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
*01-Magus (01-17) 01/11/2000, 15:102

3
1 Power switch
Press this switch to turn on the PC or set the system to the standby mode.
2 Power lamp
This lamp lights up when the PC is on.
It lights up in green when the PC is in operation and in orange when the PC is in the standby (power-
saving) mode.
3 Hard disk access lamp
This lamp lights up while the hard disk is accessed.
4 Volume
Use this control to adjust the volume of the speaker or headphones.
Turn this control upward to turn up or downward to turn down.
5 Headphone jack
When listening to sound output from the PC or a music CD with headphones, plug them to this
jack.
6 Microphone jack
Plug a microphone to this jack.
7 USB connector
Slide the cover down and connect a USB peripheral device.
8 Smart card bay
Use this bay to install a smart card reader/writer.
9 Busy lamp (CD-ROM pre-installed model)
This lamp lights up while data is read from the CD-ROM drive or a music CD is played.
10 CD-ROM drive (CD-ROM pre-installed model)
Insert a CD-ROM into this drive to read data or programs, or insert a music CD for playback.
11 Eject button (CD-ROM pre-installed model)
Press this button to insert or remove a CD-ROM or music CD. This button can be used when the
PC is on. Do not press this button when the Busy lamp is on.
12 Floppy disk eject button
Press this button to remove a floppy disk from the floppy disk.
Do not press this button when the floppy disk access lamp is on.
13 Floppy disk drive
This drive accommodates a floppy disk for writing and reading data.
14 Floppy disk access lamp
This lamp lights up while the floppy disk is accessed.
15 Foot
Use this foot to install the PC.
It is designed to prevent the PC from falling when it is vertically installed.
*01-Magus (01-17) 01/11/2000, 15:103

4
■Back of the PC unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
*01-Magus (01-17) 01/11/2000, 15:104

5
1 Venthole
An opening provided to let heat go out of the PC.
2 Inlet
Connect the power cable of the PC unit to this connector.
3 Outlet
Connect the power cable of the display to this outlet.
4 Expansion slot
Insert an optional expansion card to this slot.
This slot accommodates a PCI card.
5 Mouse connector
Connect a mouse.
6 Keyboard connector
Connect the keyboard.
7 Serial connector
Connect the cable of an RS-232C device.
8 Parallel connector
Connect the cable of a printer or scanner.
9 CRT connector
Connect the cable of an analog RGB display.
10 DVI connector
Connect the cable of a DVI display.
11 LAN connector
Connect the LAN cable.
12 USB connector
Connect a USB peripheral device.
13 LINE IN terminal
A terminal for sound input. Connect the output terminal of audio equipment to this terminal.
14 LINE OUT terminal
A terminal for sound output. Connect the input terminal of audio equipment to this terminal.
When connecting speakers, use those with a built-in amplifier.
*01-Magus (01-17) 01/11/2000, 15:105

6
■Inside the PC unit
1 Expansion slot
Insert an optional expansion card to this slot.
This slot accommodates a PCI card.
2 Power supply unit
3 Internal hard disk
This is an IDE-compliant hard disk.
12
3
*01-Magus (01-17) 01/11/2000, 15:106

7
■Motherboard
1 CPU
2 DIMM slots
Memory modules are inserted into these slots.
When seen from the front of the PC unit, DIMM1 and DIMM2 are arranged in this order from the
right.
3 Secondary IDE connector (IDE2)
A standard CD-ROM is connected (CD-ROM pre-installed model).
4 Primary IDE connector (IDE1)
A standard hard disk is connected.
5 Internal battery
This battery provides power to retain information on date and time, and settings made in BIOS
Setup. The life is about 5 years under normal use (8 hours a day).
6 Floppy connector (FDD)
1
2
3
4
5
6
*01-Magus (01-17) 01/11/2000, 15:107

8
2 Installation
This section explains how to install your PC and also provides note on using the PC.
■Installation area
Do not install the PC in the following areas:
- Areas that are humid, dusty, or subjected to oil mist.
- Poorly ventilated areas
- Areas where fire is used
- Bathrooms and other areas where water may splash
- Areas exposed to direct sunlight or near a heater and other areas with high temperatures
- Areas with temperatures below 10°C
- Areas where you may trip on a cable.
- Areas subjected to a strong magnetic field, such as near a television or speaker.
- Unstable areas with violent vibration or on a slanted surface
■Mounting the feet
●Vertical placement
•Double feet
Take the following steps to place your PC vertically off a wall.
1 Assemble the feet.
*01-Magus (01-17) 01/11/2000, 15:108

9
2 Mount the feet on the PC unit.
Fix the feet by tightening screws into two holes marked “DOUBLE”on the bottom of the feet.
•Single foot
Take the following steps to place your PC vertically on a wall.
1 Disassemble the feet.
2 Mount one of the feet on the PC unit.
Fix the foot by tightening screws into two holes marked “SINGLE”on the bottom.
Mount the foot so that the right side of the vertically placed PC unit faces a wall.
*01-Magus (01-17) 01/11/2000, 15:109

10
●Horizontal placement
1 Disassemble the feet.
2 Place the PC unit on the disassembled feet.
*01-Magus (01-17) 01/11/2000, 15:1010