Fujitsu ESPRIMO D53 Series User manual

System
Operating Manual
FUJITSU Desktop
ESPRIMO D53x / D73x

Thank you for buying an innovative product from Fujitsu.
Latest information about our products, useful tips, updates etc. is available
on our website: "http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy using your new Fujitsu system!

Published by / Contact address in the EU
Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Straße 8
80807 Munich, Germany
"http://www.fujitsu.com/fts/"
Copyright
©Fujits
u Technology Solutions GmbH 2018. All rights reserved.
Publication Date
11/2018
Order No.: A26361-K1630-Z320-1-7619, edition 2

FUJITSU Desktop
ESPRIMO D53x / D73x
Operating Manual
Your ESPRIMO 5
Important notes 7
Device overview 8
Getting started 12
Connecting external devices 16
Switching on for the first time:
installing the software 21
Operation 22
Software installation and restore 26
Problem solutions and tips 27
Clean/replace dust filter 31
System expansions and repairs 32
Technical specification 33
Index 34

Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited
or its subsidiaries in the USA and other countries.
Kensington, MicroSaver and K-Slot are registered trademarks of ACCO Brands.
USB Type-C™ and USB-C™ are trademarks of the USB Implementers Forum
in the USA and other countries.
Microsoft and Windows are trademarks or registered trademarks of Microsoft
Corporation in the USA and/or other countries.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.

Contents
Contents
YourESPRIMO ......................................................................... 5
Validityofthe ReferenceManual ......................................................... 5
Notational conventions .................................................................. 6
Importantnotes ........................................................................ 7
Safetyinformation ....................................................................... 7
Cleaning the device ..................................................................... 7
Energy saving, disposaland recycling .................................................... 7
Deviceoverview ....................................................................... 8
Front ................................................................................... 8
Rear ................................................................................... 9
Indicatorson thedevice ................................................................. 10
Gettingstarted ......................................................................... 12
Unpacking and checking thedelivery ..................................................... 12
Steps for initial setup .................................................................... 12
Setting up the device .................................................................... 13
Vertical operatingposition withfeet (optional) .......................................... 13
Connecting the device tothemains supply ................................................ 15
Connectingexternaldevices ........................................................... 16
Portson thedevice ..................................................................... 17
Frontand rearports ................................................................. 17
Connecting a monitor . .................................................................. 18
Connecting the mouse .................................................................. 18
Connecting a USB mouse . ........................................................... 18
Connecting a PS/2 mouse ........................................................... 18
Connecting the keyboard . . . . . ........................................................... 19
Connecting a USB keyboard . . ....................................................... 19
Connecting a PS/2 keyboard . . ....................................................... 19
Connecting external devices to the serial interface . ........................................ 19
Portsettings ........................................................................ 19
Devicedrivers ...................................................................... 19
Connecting external devices to the USB ports . ............................................ 20
Devicedrivers ...................................................................... 20
Switching on for the firsttime:installingthesoftware .................................. 21
Switch onthemonitor andthe machine ................................................... 21
Installingthesoftware ................................................................... 21
Operation .............................................................................. 22
Switchthe deviceon .................................................................... 22
Switchingoffthe device ................................................................. 22
Procedure in an emergency . . . ....................................................... 22
Settingsin BIOSSetup .................................................................. 22
Property and data protection . . ........................................................... 23
Anti-theft protection and lead-sealing . . . . . . ............................................ 23
Mechanical casing lock (optional) . . ................................................... 24
BIOSsetup securityfunctions ........................................................ 24
AccessauthorisationviaSmartCard .................................................. 24
Operating the SmartCard reader (optional) ............................................ 24
Fujitsu 3

Contents
Deletedata ......................................................................... 25
Softwareinstallationandrestore ....................................................... 26
Installingnew software .................................................................. 26
Download currentdrivers/software ........................................................ 26
Problemsolutionsandtips ............................................................ 27
Helpifproblemsoccur ................................................................... 27
Troubleshooting . . ....................................................................... 27
Power-on indicatorremains unlitafteryouhaveswitchedon yourdevice ................. 27
The device cannot be switched off with the On/Off switch. .............................. 28
Monitorremainsblank ............................................................... 28
Nomousepointerdisplayedon thescreen ............................................ 29
Time and/or date is not correct . . . . . . ................................................. 29
SmartCard reader is not recognised . ................................................. 29
SmartCard PINforgotten ............................................................. 30
Errormessagesonthescreen ........................................................ 30
Tips .................................................................................... 30
Clean/replace dust filter ................................................................ 31
Systemexpansionsandrepairs ........................................................ 32
Technical specification ................................................................. 33
Index .................................................................................. 34
4Fujitsu

Your ESPRIMO
Your ESPRIMO
Overview
... is available with various configuration levels which differ in terms of hardware and software
equipment. You can install additional drives (for example a DVD drive) and other boards.
This manual tells you how to start using your device and how to operate it in daily use.
This manual applies for all configuration levels. Depending on the chosen configuration
level, some of the hardware components described may not be available on your PC.
Please also read the notes about your operating system.
Depending on the configuration selected, the operating system is preinstalled
on your hard disk (e.g. Windows).
Further information on this device is provided:
• in the "Quick Start Guide" poster
• in the "Safety/regulations" manual
• in the "Warranty" manual
• in the BIOS manual for your device
• in the "System expansions and repairs" manual
• in the operating manual for the monitor
• in the manual for the mainboard
• in your operating system documentation
• in the document "Data deletion"
ValidityoftheReferenceManual
This reference manual applies to the following systems:
• FUJITSU Desktop ESPRIMO D538
• FUJITSU Desktop ESPRIMO D738
Fujitsu 5

Your ESPRIMO
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
6Fujitsu

Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the information provided in the "Safety/regulations" manual
and in the following safety notes.
When installing and operating the device, please observe the notes on
environmental conditions in Chapter "Technical specification", Page 33 as well
as the instructions in Chapter "Getting started", Page 12.
Replace the lithium battery on the mainboard only in accordance with the
instructions in the "System expansions and repairs" manual.
During system expansions and repairs on the device, take into account the information
in the "System expansions and repairs" manual. Some of the operations described there
must only be performed by authorised service technicians. Incorrect repairs could greatly
endanger the user (electric shock, risk of fire) or cause serious damage to the equipment.
Cleaning the device
Device,Transpo rtation Retransportation Systemunit, seeDevice
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.
Clean the optional dust filter of the system at regular intervals (see chapter
"Clean/replace dust filter", Page 31).
Energy saving, disposal and recycling
DisposalEnergysavingRecyclingDrivers&UtilitiesDVDUserDocumentationDVD
You can find information on these subjects in the "Environment and Energy Information" manual
or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/").
Fujitsu 7

Device overview
Device overview
Ports
This chapter presents the individual hardware components of your device. This will provide
you with an overview of the operating controls of the device. Please familiarise yourself
with these components before you start to work with the device.
Front
The following chapters always show the maximum configuration level in
the illustrations. Any deviations between the individual device variants are
separately indicated in the particular chapters.
1
2
3
4
5
7
6
9
8
1 = SmartCard reader (optional)
2=bayforslimlinedrive
3 = slim line drive status indicator (see
"Indicators on the device", Page 10)
4 = slim line drive insert/eject button
5 = slim line drive emergency removal
6 = ON/OFF switch with power indicator (see
"Indicators on the device", Page 10)
7 = hard disk indicator (see "Indicators on the
device", Page 10)
8 = memory card reader (optional)
9 = ports, depending on the configuration level
(see "Ports on the device", Page 17)
8Fujitsu

Device overview
Rear
8
1
3
4
6
2
5
7
1 = monitor socket (optional)
2 = casing lock (optional)
3 = eye for padlock (diameter 6 mm)
4 = knurled screw (for opening the cover)
5 = two slots for low-profile boards or port
expansions (VGA, eSATA, etc.)
6 = provision for security lock
7 = ports, depending on theconfiguration level
(see "Ports on the device", Page 17)
8 = AC voltage socket (AC IN)
Fujitsu 9

Device overview
Indicators on the device
Indicators,Device
The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
1
2
4
3
10 Fujitsu

Device overview
No. Indicator Description
1Indicator for SmartCard
reader (optional)
The indicator lights up when the SmartCard reader is accessed.
2 Drive indicator The indicator lights up when the CD-ROM or DVD drive in the
device is accessed. Never under any circumstances remove the
CD/DVD while the indicator is lit.
3 Power-on indicator Caution: In energy-saving mode, the device must not be
disconnected from the mains supply, as this could lead to loss
of data.
• The indicator is illuminated:
The device is switched on.
• The indicator is flashing:
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not lit:
The device is switched off.
4 Hard disk indicator The indicator lights up when the hard disk drive in the device
is being accessed.
Fujitsu 11

Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 7 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later date.
PackagingContentsofdeliv eryPackaging,
►Unpack all the individual parts.
►Check the contents of the package for any visible damage caused during transport.
►Check whether the delivery conforms to the details in the delivery note.
►Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingforfirs tuse,ove rviewPreparingforu se,
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connect external devices such as mouse, keyboard and monitor
• Check the voltage at the mains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect these until after the initial installation. The following
sections describe how to connect these external devices.
Drives and boards
If you have received drives or boards as well as your device, please do not
install them until after first-time setup. Installation of drives and boards is
described in the "System expansions and repairs" manual.
12 Fujitsu

Getting started
Settingupthedevice
VideoworkstationErgonomicDevice,
When setting up your device, please read the recommendations and
safety notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is
possible that the rubber feet will mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and noises may
occur. To prevent this, a distance of at least 10 mm / 0.39 in should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
For ventilation areas, a minimum distance of 200 mm / 7.87 in from
the device must be maintained.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "Technical specification",
Page 33, "Ambient conditions"). Protect the device against dust, humidity and heat.
Operating position
You can use the device in a vertical or horizontal operating position.
With the aid of suitable feet, it is possible to use the device in a vertical operating position
(see "Vertical operating position with feet (optional)", Page 13).
Vertical operating position with feet (optional)
Use the optional feet when you wish to use the device in the vertical operating position.
The set-up direction is compulsory: The captions "FUJITSU" and "ESPRIMO"
must be facing upwards so that sufficient ventilation is ensured.
You must remove the feet again to be able to open the device.
VerticaloperatingpositionOperatingposition, verticalBasefeetSidecover
Proceed as follows to operate the device in the vertical operating position with the feet:
►If necessary, disconnect the cables connected to the device.
Fujitsu 13

Getting started
3
2
1
4
5
6
6
3
3
4
►Place the device on the right side as shown.
The screw holes (6) and guide openings (4) for securing the feet on the
left side of the device point upwards.
►Place the feet (3) on the left side of the device so that the pins (2) enter into the corresponding
guide openings (4) on the device and the screws rest against the screw holes (6).
►Tighten the screws to secure the feet.
►Stand the device on the feet as shown.
14 Fujitsu

Getting started
Connecting the device to the mains supply
Mainsadapter
Use the following table to check which mains plug applies for your country. The
following illustration may be different from your country variant.
2
1
►Connect the power cable to the device (1).
►Plug the power plug into a grounded mains outlet (2).
Power connection Country
USA, Canada, Mexico, parts of South America,
Japan, Korea, the Philippines, Taiwan
Russia and the Commonwealth of Independent
States (CIS), large parts of Europe, parts of
South America, the Middle East, parts of Africa,
Hong Kong, India, large parts of South Asia.
UK, Ireland, Malaysia, Singapore, parts of Africa
China, Australia, New Zealand
Fujitsu 15

Connecting external devices
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always hold the plug of a cable when removing it. Never unplug a
cable by pulling the cable itself.
To ensure that your device works properly, use only the connection cable
supplied or use a high-quality connection cable.
16 Fujitsu