Fujitsu fi-4860C User manual

Installation Guide
fi-4860C Image Scanner
P3PC-E177-01EN

●i
Thank you for purchasing the fi-4860C Duplex Color Scanner.
The fi-4860C is an image scanner designed to scan various documents in large
quantities.
The fi-4860C has the following features.
 High speed, high quality color scanning capabilities
Scans documents of A4 size at the speed of 60ppm/120ipm (200dpi).
 Highly reliable document handling
Accepts various thicknesses, sizes and types of documents.
 Production ready
High capacity hopper (500sheets, 20lb(75g/m2) A4 size) and imprinter
options.
About this manual
The contents of this manual are as follows.
1. SCANNER BASICS
This chapter describes the contents of the scanner package,
partnames, and operator panel arrengements.
2. INSTALLATION AND CONNECTIONS
This chapter describes how to install and connect the scanner to a PC,
and how to install the scanner application software.
INTRODUCTION

●ii
The “Operator’s Guide” is stored in the “User Manual (CD-ROM)”.
The guide includes handling method and daily care of a scanner, replacing of
consumbles, solutions for troubles, etc. In addition to this guide (Installation Guide),
please also read the Operator’s Guide.
1. BASIC SCANNER OPERATIONS
This chapter describes basic scanner operations including basic
document scanning.
2. SCANNING VARIOUS TYPES OF DOCUMENTS
This chapter describes how to scan various type of documents.
3. DAILY CARE
This chapter describes how to clean the scanner.
4. REPLACEMENT OF CONSUMABLES
This chapter describes how to replace scanner consumables.
5. SOLVING COMMON PROBLEMS
This chapter describes how to remedy document jams, other troubles,
items to check before contacting the agent where you bought the
scanner, and how to check device labels.
6. ADF DOCUMENT SPECIFICATIONS
This chapter describes the types of documents which can be scanned
with this scanner.
7. OPERATOR PANEL MENUS
This chapter describes Setup-mode and Test-mode.
8. OPTIONS
This chapter describes options.
9. SCANNER SPECIFICATIONS
This chapter lists the scanner specifications.
We hope that this manual is useful in taking full advantage of the fi-4860C
Duplex Color Scanner's advantages.
August, 2002

●iii
■ Regulatory Information
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Canadian DOC Regulations
This digital apparatus does not exceed the Class A limit for radio noise emissions
from digital apparatus set out in the Radio interference Regulations of the Canadian
Department of Communications.
Le pésent appareil numérique n’ément pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la classe A prescridtes dans le
Réglesment sur le brouillage radioélectrique dicté par le ministere des
Communications du Canada.
Cet appareil numérique de la classe A est conformme à la norme NMB-003 du
Canada.
CAUTION
Changes or modifications not expressly
approved by the party responsible for compli-
ance could void the user’s authority to operate
the equipment.
ATTENTION
•The use of a shielded interface cable is
required to comply with the Class A limits
of Part 15 of FCC rules. The length of the
SCSI interface cable must be 1.5 meters
(5 feet) or less.
•The length of the AC cable must be 3
meters (10 feet) or less.

●iv
Bescheimigung des Herstellers / Importeurs
Hiermit wird bescheinigt, daß der/dieldas
•fi-4860C in Übereinsstimmung mit den Bestimmungen der
•AmtsblVfg 243/1991 funkentstört ist. Der Deutschen Bundesport wurde das
Inverkehrbringen dieses Gerätes angezeigt und die Berechtigung zur Überprüfung
der Serie auf Einhaltung der Bestimmungen eingeräumt.
•Maschinenlärminformationsverordnung 3. GS GV, 18.01.1991:Der höchste
Schalldruckpegel beträgt 70 dB (A) order weniger gemäß ISO/7779.

●v
International ENERGY STAR Program
As an ENERGY STAR(R) Partner, PFU LIMITED has determined
that this product meets the ENERGY STAR(R) guidelines for energy
efficiency..
The International ENERGY STAR(R) Office Equipment Program is
an international program that promotes energy saving through the penetration of
energy efficient computers and other office equipment. The program backs the
development and dissemination of products with functions that effectively reduce
energy consumption. It is an open system in which business proprietors can
participate voluntarily. The targeted products are office equipment such as
computers, monitors, printers, facsimiles, copiers, scanners, and multifunction
devices. Their standards and logos( ) are uniform among participating nations.
Use in High-safety Applications
This product has been designed and manufactured on the assumption that it will be
used in office, personal, domestic, regular industrial, and general-purpose
applications. It has not been designed and manufactured for use in applications
(simply called "high-safety applications" from here on) that directly involve serious
danger to life and health when an extremely high degree of safety is required, for
example, in the control of nuclear reactions at nuclear power facilities, automatic
flight control of aircraft, air traffic control, operation control in mass-transport
systems, medical equipment for sustaining life, and missile firing control in weapons
systems, and when provisionally the safety in question is not ensured. The user
should use this product without adopting measures for ensuring safety in such high-
safety applications. FPU Co., Ltd. assumes no liability whatsoever for damages
arising from use of this product by the user in high-safety applications, and for any
claims or compensation for damages by the user or a third party.

●vi
About the use of mercury
Scanner lamp includes mercury.
Too avoid unexpected injury, read the followings carefully.
Doing following actions may result in serious personal injuries:
•Put the substance in the lamp into mouth as it contains mercury.
•Vaporize, crumb, condense the scanner.
•Aspirate the chemical liquid containd in scanner parts.
Dispose of the scanner should be conducted as required by local ordinances or
regulations.
Illegal Copying
Copying of bank notes, currency, government-issued bonds and passports, licenses
and permits issued by public and private organizations, official documents, private
documents, etc. is illegal and punishable by law.
Copyright
Copyright items such as books, paintings, wood block prints, maps, drawings,
photographs, etc. cannot be reproduced without the permission of the rightful
person except in individual or domestic applications, or in other similar applications
within a limited scope.

●vii
Trademarks
Microsoft®, Windows®and Windows NT®are registered trademarks of Microsoft
Corporation of the USA and other respective countries.
ISIS®is a registered trademark of Pixel Translations, A Division of Actionpoint Inc.
Adobe and the Adobe logo as well as Acrobat and the Acrobat Logo are trademarks
of Adobe Systems Incorporated.
Other product names referred to in this manual are registered trademarks or
trademarks of respective companies.
How Trademarks Are Indicated In This Manual
References to operating systems (OS) are indicated as follows:
Windows®95: Refers to Microsoft®Windows®95 operating system.
Windows®98: Refers to Microsoft®Windows®98 operating system.
Windows®Me: Refers to Refers to Microsoft®Windows®Millennium Edition
operating system.
Windows®2000: Refers to Microsoft®Windows®2000 Professional operating
system.
Windows®XP: Refers to Microsoft®Windows®XP Professional operating
system, and Microsoft®Windows®XP Home Edition operating
system.
Windows NT®: Refers to Microsoft®Windows NT®operating system Version4.0.
Where there is no distinction between the different versions of the above operating
system, the general term "Windows®" is used.
All Rights Reserved, Copyright© PFU LIMITED 2002.

●viii
■ Note, Liability
READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT.
IF NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO
USERS OR BYSTANDERS.
While all efforts have been made to ensure the accuracy of all information in this
manual, PFU LIMITED assumes no liability to any party for any damage caused by
errors or omissions or by statements of any kind in this manual, its updates or
supplements, whether such errors are omissions or statements resulting from
negligence, accidents, or any other cause. PFU LIMITED further assumes no
liability arising from the application or use of any product or system described
herein; nor any liability for incidental or consequential damages arising from the use
of this manual. PFU LIMITED disclaims all warranties regarding the information
contained herein, whether expressed, implied, or statutory.
PFU LIMITED reserves the right to make changes to any products herein, to
improve reliability, function, or design, without further notice and without obligation.

●ix
■ Preface
Safety Precautions
This manual describes important details for ensuring the safe and correct use of
this product. Thoroughly read this manual before you start to use this product. In
particular, be sure to read and fully understand the Safety Precautions described in
this manual before you use this product.
Also, store this manual in a safe place so that it can be easily referred to during use
of this product.
Warning Indications Used In This Manual
This manual uses the following indications to ensure safe and correct use of this
product, and to prevent possible danger and injury to the operator and other
persons.
CAUTION
This indication alerts operators to an opera-
tion that, if not strictly observed, may result in
severe injury or death.
WARNING
This indication alerts operators to an opera-
tion that, if not strictly observed, may result in
safety hazards to personnel or damage to
equipment.