Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Manual

M4097D Image Scanner
Operator's Guide
P3PC-E482-05EN

i
For Safe Operation
Treatment of This Manual
READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT,
IF NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO
USERS OR BYSTANDERS.
While all efforts have been made to ensure the accuracy of all information in this
manual, PFU assumes no liability to any party for any damage caused by errors or
omissions or by statements of any kind in this manual, its updates or supplements,
whether such errors are omissions or statements resulting from negligence,
accidents, or any other cause. PFU further assumes no liability arising from the
application or use of any product or system described herein; nor any liability for
incidental or consequential damages arising from the use of this manual. PFU
disclaims all warranties regarding the information contained herein, whether
expressed, implied, or statutory.
PFU reserves the right to make changes to any products herein, to improve
reliability, function, or design, without further notice and without obligation.
EMC and Safety
FCC declaration: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ii
FCC warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equip-
ment.
NOTICE
• The use of a non-shielded interface cable with the referenced device is prohibited.
The length of the parallel interface cable must be 3 meters (10 feet) or less. The
length of the serial interface cable must be 15 meters (50 feet) or less.
• The length of the power cord must be 3 meters (10 feet) or less.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformme à la norme NMB-003 du
Canada.
As an ENERGYSTAR®Partner, PFU Limited has determined that this scanner meets
ENERGYSTAR®guidelines for energy efficiency. ENERGYSTAR®is a U. S. registered
mark.

iii
Warning on Use Requiring Extremely High Safety Levels
This Product is designed, developed and manufactured as contemplated for
general use, including without limitation, general office use, personal use and
household use, but is not designed, developed and manufactured as contemplated
for use accompanying fatal risks or dangers that, unless extremely high safety is
secured, could lead directly to death, personal injury, severe physical damage or
other loss (hereinafter “High Safety Required Use”), including without limitation,
nuclear power core control, airplane control, air traffic control, mass transport
operation control, life support, weapon launching control. You shall not use this
Product without securing the sufficient safety required for the High Safety Required
Use. If you wish to use this Product for High Safety Required Use, please consult
with our sale person in charge before such use.
Warning on Reproduction
Reproducing bills, coins, government securities and passports, licenses issued by
public author or civilian organizations, official documents and private paper is illegal
and brought to justice.
About Copyright
Literary works like books, paintings, wood-block prints, maps, drawings and
photographs should not be reproduced other than the personal or domestic use or
the use within other limit without the rightful person’s permission.
Trademark Acknowledgment
PFU is a registered trademark of PFU Limited.
• Microsoft, Windows and Windows NT are registered trademarks of Microsoft
Corporation America in the United States and any other countries. In this manual,
the Microsoft Windows 98®Operating System is referred to as Windows 98, the
Microsoft®Windows ME®Operating System is referred to as Windows ME, and
the Microsoft®Windows 2000®Operating System is referred to as Windows 2000.
the Microsoft®Windows XP®Operating System is referred to as Windows XP.
• Adobe and the Adobe logo as well as Acrobat and the Acrobat Logo are
trademarks of Adobe Systems Incorporated.

iv
• The contents of this manual may be revised without prior notice.
• We are unaccountable for any damages or passive damages from the use of
this equipment or this manual and any compensation of third party.
• The details of warranty is described in the warranty document pre-packaged.
• The minimum holding period of spare parts of this equipment is five years
from the effective date of discontinuance.
All Rights Reserved, Copyright © PFU LIMITED 2001-2003
Conventions for Alert Messages
This manual uses alert messages to prevent users and bystanders from being
injured or from suffering damage to their property. An alert message consists of an
alert signal and alert statements. The alert signals and their meanings are as
follows.
WARNING
WARNING indicates that personal injury like pinching of fingers or hands may result
if you do not follow a procedure correctly.
CAUTION
CAUTION indicates that damage to the scanner may result if you do not follow a
procedure correctly.
Official PFU part names are indicated with an initial capital letter, as in the part name
“Pick roller”.
NOTICE
A NOTICE provides “how-to” tips or suggestions to help you perform a procedure
correctly.
• ISIS is a registered trademark of Pixel Translations, A Division of Actionpoint Inc.
• All other brand names and product names of this manual are trademarks or
registered trade marks.
• Reproducing in whole or in part of this manual against the Copyright law.

v
PFU Offices
Please send your comments on this manual or on PFU products to the following
addresses:
PFU LIMITED
Imaging Products Division
Solid Square East Tower, 580
Horikawa-cho, Saiwai-ku,
Kawasaki-shi, Kanagawa 212-8563, Japan
Phone: [phone]
Fax: [phone]
Website: http://imagescanner.fujitsu.com/
E-mail: [email protected]
Corporate headquarters
Nu 98-2 Unoke, Unoke-machi, kahoku-gun,
Ishikawa 929-1192, Japan
Phone: [phone]
Fax: [phone]
North America
FUJITSU COMPUTER PRODUCTS OF
AMERICA, INC.
2904 Orchard Parkway, San Jose,
CA 95134-2009, U.S.A.
Phone: [phone]
Technical Assistance Center: (1-800)626-4686
Fax: [phone]
Website: http://www.fcpa.com/
E-mail: [email protected]
FUJITSU CANADA, INC.
2800 Matheson Boulevard East,
Mississauga, Ontario L4W 4X5, Canada
Phone: [phone]
Fax: [phone]
Website: http://www.fujitsu.ca/
E-mail: [email protected] (for sales
questions)
[email protected] (for technical
questions)
Europa
FUJITSU EUROPE LTD.
Hayes Park Central, Hayes End Road, Hayes
Middlesex UB4 8FE, England
Phone: [phone]
Fax: [phone]
Website: http://www.fujitsueurope.com/home/
E-mail: [email protected]
FUJITSU DEUTSCHLAND GMBH.
Frankfurter Ring 211,
80807 München 40, Germany
Phone: [phone]
Fax: [phone]
Website: http://de.fujitsu.com/
E-mail: [email protected]
FUJITSU ITALIA S.p.A.
Via Nazario Sauro, 38
20099 Sesto San Giovanni (Milan), Italy
Phone: [phone]
Fax: [phone]
Website: http://www.fujitsueurope.com/
FUJITSU ICL ESPAÑA, S.A.
Camino Cerro de los Gamos, 1 28224,
Pozuelo de Alarcon, Madrid, Spain
Phone: [phone]
Fax: [phone]
Website: http://www.fujitsueurope.com/
E-mail: [email protected]
Australia
FUJITSU AUSTRALIA LTD.
2 Julius Avenue
North Ryde, N.S.W 2113 Australia
Phone: [phone]
Fax: [phone]
Website: http://au.fujitsu.com/

vi
Asia
FUJITSU ASIA
20 Science Park Road, #03-01,
Tele Teck Park Singapore Science Park II,
Singapore 117674
Phone: [phone]
Fax: [phone]
Website: http://sg.fujitsu.com/
E-mail: [email protected]
FUJITSU TAIWAN LTD.
19th Fl., No39, 1 Sec. Chung-Hwa Rd.,
Taipei, Taiwan
Phone: [phone]
Fax: [phone]
Website: http://tw.fujitsu.com/
FUJITSU HONG KONG LTD.
10/F., Lincoln House, 979 King’s Road,
Taikoo Place, Island East, Hong Kong
Phone: [phone]
Fax: [phone]
Website: http://hk.fujitsu.com/
E-mail: [email protected]
FUJITSU SYSTEMS BUSINESS (THAILAND)
LTD.
12th Fl., Olympia Thai Tower,
444 Rachadapisek Road, Samsennok,
Huay kwang, Bangkok 10320, Thailand
Phone: [phone]
Fax: [phone]
Website: http://th.fujitsu.com/
FUJITSU KOREA LTD.
Susong Tower Building, 83-1
Susong-Dong, Jongno-gU, Seoul,
Koria
Phone: [phone]
Fax: [phone]
Website: http://kr.fujitsu.com/
E-mail: [email protected]
FUJITSU MALAYSIA SDN, BHD.
7th FL, Wisma Damansara, Jalan Semantan
50490 kuara Lumpur, Malaysia
Phone: [phone]
Fax: [phone]
Website: http://my.fujitsu.com/
FUJITSU PHILIPPINES, INC
2nd Fl., United Life Building, Pasay Road,
Legaspi Village Makati, Metro Manila,
Philippines
Phone: [phone]
Fax: [phone]

vii
Preface
Thank you very much for your purchase of the M4097D Image Scanner.
The M4097D is a very fast and highly functional image scanner developed for
volume filing, using charge-coupled device (CCD) image sensors. This scanner
features duplex scanning and high quality image processing with an automatic
document feeder (ADF).
As this manual explains the basic handling of the scanner, read it carefully to use
the scanner properly.
Edition Date published Revised contents
01 February, 2000 First edition
02 February, 2000 Second edition
03 May, 2000 Third edition
04 October, 2002 Manual code changed
Manual code: P3PC-E482-05EN

viii

ix
ix
CONTENTS
❑❑
❑❑
❑CHAPTER 1 COMPONENTS
Checking the Components ............................................... 1-1
Units and Assemblies ...................................................... 1-2
Operator Panel ................................................................ 1-5
❑❑
❑❑
❑CHAPTER 2 INSTALLATION AND CONNECTIONS
Precautions ...................................................................... 2-1
Inspection ........................................................................ 2-2
Repositioning the Shipping Lock ...................................... 2-4
Cable Connections .......................................................... 2-5
Mounting the Stacker ....................................................... 2-7
Setting the SCSI ID and the SCSI Terminator .................. 2-8
❑❑
❑❑
❑CHAPTER 3 OPERATING INSTRUCTION
Turning the Power On ...................................................... 3-1
Waking up the Scanner from the Low Power Mode.......... 3-2
Manual Feed Mode Setting .............................................. 3-3
Loading Documents on the ADF ...................................... 3-4
Loading Documents on the Flatbed ............................... 3-10
Loading Documents Larger than the Document Bed ..... 3-11
Reading a Page from a Thick Book ................................ 3-12
❑❑
❑❑
❑CHAPTER 4 ADF DOCUMENT SPECIFICATION
Document Size ................................................................ 4-1
Document Quality ............................................................ 4-2
ADF Document Feeder Capacity ..................................... 4-4
Areas not to be Perforated ............................................... 4-5
Grounding Color Areas .................................................... 4-6
Double Feed Detection Condition .................................... 4-7
Job Separation Sheet ...................................................... 4-8
❑❑
❑❑
❑CHAPTER 5 SCANNER SPECIFICATIONS
Basic Product Specification ............................................. 5-1
Installation Specification .................................................. 5-2
Dimensions ...................................................................... 5-3

x
x
❑❑
❑❑
❑CHAPTER 6 CONSUMABLES AND OPTIONS
Consumables ................................................................... 6-1
Options ............................................................................ 6-2
Video Interface Option ..................................................... 6-3
IPC-4D Option ................................................................. 6-8
Imprinter Option (fi-475PR) .............................................. 6-9
❑❑
❑❑
❑CHAPTER 7 SETUP MODE
Activating the Setup Mode ............................................... 7-1
Contents of the Setup Mode ............................................ 7-2
❑❑
❑❑
❑GLOSSARY OF TERMS ..............................................................GL-1
❑❑
❑❑
❑INDEX ...................................................................................... IN-1
❑❑
❑❑
❑Declarations of Conformity .......................................................DE-1

1
CHAPTER
COMPONENTS
This chapter describes the components of the scanner, part
names, operator panel arrangement, and the function of parts and
LED indicators. After unpacking the scanner, confirm that all
components have been received by checking them against the list
in the first section.
Checking the Components
Units and Assemblies
Operator Panel

1-1
1
Checking the Components
These high precision components must be handled carefully.
Confirm that all the components shown in the following figure have been received.
If any component is missing, please contact your sales agent.
Manuals, Drivers
and software
Scanner Power cable
for North America
Power cable
for Europe
Pad ASY

1-2
Units and Assemblies
This section shows the exterior view and assemblies of the scanner. This section also provides the
name of each part and describes its functions.
Units
NOTICE
The shipping lock must be switched to the operating position before the scanner can be used. Refer to
page 2-4.
M4097D
Document cover
1
Document bed
2
Document holding
pad
3
Power switch
6
Operator panel
7
Stacker
5
ADF
4
ADF paper chute
8
ADF lever
9
Third party slot
12
Interface connector
11
Power inlet
10

1-3
No.Part Function
1 Document cover Closes over and keeps in place the document to be
read.
2 Document bed Holds document to be read. Also called Flatbed (FB).
3 Document holding pad Presses document to the Document bed.
4Automatic document feeder
(ADF)
Automatically feeds documents to the reading
position.
5 Stacker Stacks the read documents.
6 Power switch Turns the power On or Off.
7 Operator panel Contains indicator panel that indicates scanner status.
8 ADF paper chute Holds the documents to be fed by the automatic
document feeder (ADF).
9ADFlever Opens/closes the ADF to enable the removal of
documents jammed in the feeder.
10 Power inlet Connects to an AC power outlet with the power cable.
11 Interface connectors Connects to the host system with interface cables.
12 Third party slot A Fujitsu Video Interface Option Board is installed.

1-4
Stacker
Thumb screw
Guide A ASY
Pick roller 2
Pick roller 1
Pad ASY
Assemblies

1-5
Operator panel
Exit
Enter
Stop
Previous
Next
Send To/
Start Read
Check
Operator Panel
The operator panel is located on the upper right hand side of the scanner. The panel consists of an
LCD display (16 characters x 2 lines), LEDs and buttons.
Arrangement

1-6
Button/LED Function
Name of the button and
LED Function
Button Next Displays the next LCD screen.
Previous Displays the previous LCD screen.
Moves the cursor to the left.
Moves the cursor to the right.
Exit When you are entering settings on the Operator panel, pressing this button
returns you immediately to the"Scanner Ready" screen.
Enter Enters the parameter currently selected by the cursor.
Send To/
Start
Operational only when Manual start mode is set or the"Read" lamp lights;
Starts the reading when video interface option is used. Some application
software packages make use of this button.
Stop When the "Check" LED lights, pressing this button releases the error status
(turns off "Check" and returns to the "Scanner Ready" screen).
Operational only during the reading operation; stops the reading when the
video interface option is used.
Also turns off the "Check" lamp.
LED Indicates that the scanner is On.
Read Indicates the scanner is reading or ready to read.
Check If lit, this indicates that an alarm occurred. Pressing the"Stop" button
turns the "Check" lamp Off.
If it blinks at one second intervals, this means that a jam or double feed
has been detected. If the problem is jammed paper, removing the jammed
paper turns off the "Check" lamp. If the problem is double feed, pressing
the "Stop" button turns off the"Check" lamp.
If it blinks at four seconds intervals, this means that cleaning the ADF is
necessary.
z
z
z

1-7
Counter Display
Batch counter and Abrasion counters are shown bellow:
Simultaneously press the both (Left) and (Right) button for at least one second, to switch to the
Life counter panel display as shown bellow:
Paper counter
Abrasion counter
Paper counter
Abrasion counter
To return from “Fig.2” to “Fig.1”, press the both (Left) and (Right) button for at least one second.
Fig.1
Fig.2
*