Furniture of America CM3152RT User manual

1 / 7
VERSION # 20-03-10
MODEL #
CM3152RT
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
2 - People
EASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
DIFFICULT

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX7

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX7

4 / XXXXXXX7

5 / 7
ROUND TABLE
CM3152RT
#1 1pc
HARDWARE
PARTS
HARDWARE
PARTS
#2 1pc #3 4pcs
Table Top Shelf
#A 12pcs #B 12pcs #C 12pcs #D 1pc
Bolt Ø5/16" x 2-1/4" Allen WrenchFlat washerLock washer
Leg

6 / 7
ASSEMBLY INSTRUCTIONS
1
Part #1 x1pc
Part #3 x3pcs
Hardware #A x 6pcs
Hardware #B x 6pcs
Hardware #C x 6pcs
#1
#3
#2
#3
#1
2
Part #2 x1pc
Hardware #A x 3pcs
Hardware #B x 3pcs
Hardware #C x 3pcs
#A
#B
#C
#D
#A
#B
#C
#D
Prepare 6 bolts assembly by inserting lock washer (#B), then
flat washer (#C) onto bolts (#A). Align 3 legs (#3) to the holes
of the table top (#1). Secure by using bolts (#A).
Prepare 3 bolts assembly by inserting lock washer (#B), then
flat washer (#C) onto bolts (#A). Align shelf (#2) to the holes
of the legs (#3). Secure by using bolts (#A).

7 / 7
#1
#2
#3
#A
#B
#C
#D
3
Part #3 x1pc
Hardware #A x 3pcs
Hardware #B x 3pcs
Hardware #C x 3pcs
4
ASSEMBLY INSTRUCTIONS
Prepare 3 bolts assembly by inserting lock washer (#B), then
flat washer (#C) onto bolts (#A). Align leg (#3) to the holes of
the table top (#1) and shelf (#2). Secure by using bolts (#A).
Flip the table edges straight, then extend the
extension at the bottom of the table. Secure
by turning leveler at the bottom of table.