Furniture of America CM7884F/Q User manual

For more information contact our team: [email protected]

Attach HB/FB legs (#4) to the bottom holes of the headboard (#1) and footboard (#2).
Prepare 8 bolts assembly by inserting lock washer (#D), then flat washer (#C) onto bolts (#B).
Attach bolts (#B) half way into the holes of headboard (#1) and footboard (#2). Hook and rest side
rails (#3) to bolts (#B), then tighten bolts (#B).

2) Prepare 8 bolts assembly by inserting lock washer (#D), then flat washer (#C) onto bolts (#B). Align
center support rails (#6) to the holes of the headboard (#1) and footboard (#2). Secure by using bolts (#B).
1) Prepare 8 bolts assembly by inserting lock washer (#D), then flat washer (#C) onto bolts (#B).
Align support legs (#7) to the holes of the center support rails (#6). Secure by using bolts (#B)
onto hex nuts (#E).
1) Attach center caps (#H) and end caps (#G) to slats (#5)
as shown below in the diagram.
2) Attach slats (#5) to the holes of the side
rails and center support rails.

ASSEMBLY COMPLETED

For more information contact our team: [email protected]

Attach HB/FB legs (#4) to the bottom holes of the headboard (#1) and footboard (#2).
Prepare 8 bolts assembly by
inserting lock washer (#D), then
flat washer (#C) onto bolts (#B).
Attach bolts (#B) half way into the
holes of headboard (#1) and
footboard (#2). Hook and rest side
rails (#3) to bolts (#B), then tighten
bolts (#B).

1) Prepare 8 bolts assembly by inserting lock washer (#D), then flat washer (#C) onto bolts (#B).
Align support legs (#7) to the holes of the center support rails (#6). Secure by using bolts (#B)
onto hex nuts (#E).
2) Prepare 8 bolts assembly by inserting lock washer
(#D), then flat washer (#C) onto bolts (#B). Align center
support rails (#6) to the holes of the headboard (#1) and
footboard (#2). Secure by using bolts (#B).
1) Attach center caps (#H) and end caps (#G) to slats (#5)
as shown below in the diagram.
2) Attach slats (#5) to the holes of the side rails and
center support rails.

ASSEMBLY COMPLETED

For more information contact our team: [email protected]

Attach HB/FB legs (#4) to the bottom holes of the headboard (#1) and footboard (#2).
Prepare 8 bolts assembly by
inserting lock washer (#D), then
flat washer (#C) onto bolts
(#B). Attach bolts (#B) half way
into the holes of headboard (#1)
and footboard (#2). Hook and
rest side rails (#3) to bolts (#B),
then tighten bolts (#B).

Attach end caps (#E) to each ends of the slats (#5).
Insert slats (#5) to the holes of the side rails.
ASSEMBLY COMPLETED