Furniture of America CM7132-T User manual

For more information contact our team: [email protected]

1) Insert dowels (#E) and barrel nuts (#B) to each ends of
the side rails (#3,4). Align Side rails (#3,4) to the holes on
the top of the headboards (#1,2). Secure by screwing bolts
(#A) onto the barrel nuts (#B) of the side rails (#3,4).
2) Attach dowels (#E) and barrel nuts
(#B) to each ends of the guardrails
(#5). Align guardrails (#5) to the holes
of the headboards (#1,2). Secure by
screwing bolts (#A) onto the barrel
nuts (#B) of the guardrails (#5).
1) Align vertical bar (#7) to the right side holes
of the frame (#8). Secure by using bolts (#C).
2) Align vertical bar (#7) to the left side holes
of the frame (#9). Secure by using bolts (#C).

1) Align frames (#8,9) to the holes of the upper
guardrail. Secure by using bolts (#C).
2) Align frames (#8,9) to the
holes of the headboards.
Secure by using bolts (#C).
Insert dowels (#G) to the center hole of the
window panel (#11). Attach window panel
(#11) to the top holes of the window, then
secure by using bolts (#D).

Insert dowels (#G) to the center
hole of the window side panel
(#12). Attach window side panel
(#12) to the side holes of the
window, then secure by using
bolts (#D).
Insert dowels (#G) to the center hole of the
window bottom panel (#13). Attach window
bottom panel (#13) to the bottom holes of the
window, then secure by using bolts (#D).

Insert dowels (#F) to the center hole of the
door crossbar (#10). Attach door crossbar
(#10) to the top holes of the door, then secure
by using bolts (#D).
Align slat kit (#6) to the top of the bunk,
then secure by using screws (#H).