Furniture of America CM7164C User manual

The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
(Not Included)
Philips
Screwdriver
TOOLS REQUIRED
MODEL
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
2 - People
Recommended
CM7164C

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / XXXXXXX9

4 / XXXXXXX9

PARTS
CHEST
HARDWARE
MODEL CM7164C
Leg
#2 4pcs
Glass Top
#3 1pc
Chest
#1 1pc
Allen Key With Ball
#A 1pc
JCBC Bolt M6 x 30mm
#B 4pcs
CSK Screw M4 x 20mm
#C 8pcs
Spring Washer M6
#D 4pcs
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
Flat Washer Small M6 x 13mm x 1.0
#E 8pcs
Flat Washer Medium M7 x 19 x 2.0
#F 4pcs
Anti-Tipping
Hardware Kit
#G 1pc

1Part x1pc
#1
Part x1pc
#3
2Part x1pc
#1
Part x4pcs
#2
Hardware x1pc
#A
Hardware x4pcs
#B
Hardware x8pcs
#C
Hardware x4pcs
#D
Hardware x8pcs
#E
Hardware x4pcs
#F
Lift the Glass-Top #3 gently and
carefully place it at safe before
assembly begin.
#1
#B
#C
#D
#E
#F #A
#2
#3
#1
#1
Align legs (#2) to chest (#1), then
secure by using the following bolts
and screws with washers as shown
in the diagram.

3
4Place the Glass-Top #3 back to
the top surface of Chest #1.
#1
#3
#1
Secure knobs of the drawer to
the exterior of the drawers.

5
Casegoods Wall
#4