Furniture of America CM3061PT User manual

Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
EASY DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended
MODEL #
1 / 9
VERSION # 20-09-08
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
CM3061PT

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4 / XXXXXXX9

PUB TABLE
CM3061PT
5 / 9
#1 1pc #2 1pc
#A 12pcs
Table Top Top Panel
#B 16pcs
Bolt Ø5/16" x 2" Flat Washer
Ø5/16"
Table Leg (L/R)
#4 2pcs
#D 12pcs
#G 1pc
Allen Wrench M4
#3 1pc
Bottom Panel
#5 2pcs #6 1pc
Door (L/R) Back Panel
#7 2pcs
Mounting Plate
#C 12pcs
Lock Washer
Ø5/16"
#F 16pcs
Lock Washer
Ø1/4"
Handle
#H 2pcs
#E 16pcs
Lock Washer
Ø1/4"
Bolt Ø1/4" x 1-1/2"
#I 4pcs
Bolt Ø5/32"
x12mm

6 / 9
Exploded View
#6
#5L
#5R
#2
#4L
#3
#4R
#7
#7
#I 4pcs
Bolt Ø5/32"x12mm
#1

ASSEMBLY INSTRUCTIONS
1
2
7 / 9
Part #4 x2pcs
Part #2 x1pc
Hardware #B x8pcs
Hardware #E x8pcs
Hardware #F x8pcs
Part #5 x2pcs
Part #6 x1pc
Hardware #B x4pcs
Hardware #E x4pcs
Hardware #F x4pcs
#E #F
#B
#G
#2
#4R
#4L #6
#F
#E
#B
#G
#E #B #G
#F
#5R
#4R
#5L
#4L
1) Align top panel (#2) to the table legs (#4R/L), then
secure by using bolts (#B) with washers (#E,F).
2) Align back panel (#6) to the table legs (#4R/L),
then secure by using bolts (#B) with washers
(#E,F).
Align doors (#5R,L) to the table legs (#4R/L), then secure by using
bolts (#B) with washers (#E,F).

ASSEMBLY INSTRUCTIONS
3
8 / 9
Part #3 x1pc
Hardware #B x4pcs
Hardware #E x4pcs
Hardware #F x4pcs
Part #7 x2pcs
Hardware #A x4pcs
Hardware #C x4pcs
Hardware #D x4pcs
4
#4R
#3
#4L
#G #E
#B
#F
#G
#A
#C
#D
#7
#4
#7
#4
Align bottom panel (#3) to the legs (#4R/L),
then secure by using bolts (#B) with washers
(#E,F).
Align mounting plates (#7) to table legs
(#4R/L), then secure by using bolts (#A)
with washers (#C,D).

ASSEMBLY INSTRUCTIONS
5
9 / 9
Hardware #A x8pcs
Hardware #C x8pcs
Hardware #D x8pcs
Hardware #H x2pcs
Hardware #I x4pcs
6
#G
#A
#C
#D
#1 #7
#5L #H
#I
#5R
Align mounting plates (#7) to table
top (#1), then secure by using bolts
(#A) with washers (#C,D).
Secure handles (#H) to the doors (#5R/L)
by using screws (#I).