Furniture of America CM7580CK User manual

GIVE US CALL: 1-888-980-5122
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
1 / 10
MODEL #
CM7580CK
Questions?
MON-FRI 8:30AM - 5:30PM (PST)
EASY DIFFICULT
VERSION # 20-03-06
2 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX10

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX10

4 / XXXXXXX10

BED
CM7580CK
#1 1pc
Leg Support
#2 2pcs #3 1pc
Headboard Panel
#5 2pcs
Leg(L&R)
#7 1pc
Slat (13 pcs)
#6 1set
Rail
#8 4pcs
Support Leg
305x30x30mm
Center Support
#A 8pcs #B 8pcs
Bolt Ø5/16" x 1-3/8" Lock Washer
Ø5/16"
Footboard
#4 1pc
5 / 10
#9 2pcs
Allen key 4mm
Side Rail Top Panel
#D 1pc
Flat Washer
Ø5/16"
#C 8pcs

Exploded View
#1
#2L
#2R
#3
#4
#5
#5
#6 #7
#8
6 / 10
#E 15pcs #F 10pcs
Flat Washer
Ø1/4"
#H 10pcs
#G 10pcs
Bolt Ø1/4" x 1-3/8''
#9
#9
Screw #4 x 30mm Lock Washer
Ø1/4"

CM7580CK is packed in 3 cases
Carton Disignation
Headboard Panel #1
Part Hardware
#A x 8pcs
#B x 8pcs
#C x 8pcs
#2
Side Rails
Center Support
Support Leg
305x30x30mm
#3
#4
#5
#6
#7
#8
Leg(L&R)
Leg Support
Footboard
Drawer Slide Rail
#D x 1pc
#E x 15pcs
Side Rail Top
Panel
#F x 10pcs
#9
#H x 10pcs
#G x 10pcs
#D x 1pc
7 / 10
CM7580
CK -HB
CM7580
CK -FB
CM7580
CK -R

ASSEMBLY INSTRUCTIONS
1
2
Part #1 x1pc
Part #2 x2pcs
Hardware #A x6pcs
Hardware #B x6pcs
Hardware #C x6pcs
#2L
#C
#B
#1
#A
#2R
#D
#1
#3
#A #C
#B
#D
Part #3 x1pc
Hardware #A x2pcs
Hardware #B x2pcs
Hardware #C x2pcs
8 /10
Prepare 6 bolts assembly
by inserting lock washer
(#B), then flat washer (#C)
onto bolts (#A). Align the
headboard legs (#2R/L) to
the holes of the headboard
(#1). Make sure the HB
legs (#2R/L) are placed
correctly. Secure with bolts
(#A).
Prepare 2 bolts assembly by
inserting lock washer (#B), then
flat washer (#C) onto bolts (#A).
Align the leg support (#3) to the
bottom holes of the headboard
(#1). Secure with bolts (#A).

ASSEMBLY INSTRUCTIONS
Part #4 x1pc
Part #5 x2pcs
3
4
#1
#5
#5
#4
#8
#7
Part #7 x1pc
Part #8 x4pcs
9 / 10
Hook the side rails (#5) to the latch of the headboard (#1) and footboard (#4). Make sure it
is firmly resting on the latch.
Attach support legs (#8) to the center support slat (#7). Adjust adjustable floor protectors
on the support legs (#8) according to ground level.

ASSEMBLY INSTRUCTIONS
5
Part #6 x1set
Hardware #E x15pcs
6
#E
#6
#6
#5
10 / 10
#D #F #G #H
#9
#5
#5
#9
Part #9 x2pcs
Hardware #F x10pcs
Hardware #G x10pcs
Hardware #H x10pcs
Align the slats (#6) to the center support slat and side rails.
Secure with screws (#E).
Prepare 10 bolts assembly by inserting lock washer (#G), then flat washer
(#H) onto bolts (#F). Align side rail top panel (#9) to the top of the slats of
the side rails. Secure with bolts (#F).