Furniture of America Christie CM7540WHQ User manual

Rev: 18-07-19
CM7540Q
For more information contact our team: [email protected]

1) Prepare 4 bolts assembly by inserting washer (#C) onto bolts
(#B). Insert bolts (#B) to headboard (#1) 75% in, then hook side
rails (#3) to the bolts (#B) on headboard (#1). Secure by inserting
washer (#C) and wing nut (#D) from the back of the headboard
(#1) onto bolts (#B).
2) Align footboard (#2) to the bottom holes of the side
rails (#3). Insert bolts (#B) from footboard (#2) to side
rails (#3), then secure by inserting washer (#C) and
wing nut (#D) from the other end of the bolts (#B).
Align slat support legs (#6) to
the holes of the slats (#4,5).
Secure by using bolts (#A).

Place slats (#4,5) to the side rails (#3)
as shown in the picture. Secure by using
screws (#G).
1) Please refer to steps (#5) on how to align and place concealed panels (#7) correctly.
2) Secure concealed panels (#7) to bed slats by using screws (#H).

This is how the concealed panels (#7) look like
on the bed from a high view.
ASSEMBLY COMPLETED

Rev: 18-07-19
CM7540CK
For more information contact our team: [email protected]

1) Prepare 4 bolts assembly by inserting washer (#C) onto
bolts (#B). Insert bolts (#B) to headboard (#1) 75% in, then
hook side rails (#3) to the bolts (#B) on headboard (#1).
Secure by inserting washer (#C) and wing nut (#D) from the
back of the headboard (#1) onto bolts (#B).
2) Align footboard (#2) to the bottom holes of the side
rails (#3). Insert bolts (#B) from footboard (#2) to side
rails (#3), then secure by inserting washer (#C) and
wing nut (#D) from the other end of the bolts (#B).
Align slat support legs (#6) to the holes of
the slats (#4,5). Secure by using bolts (#A).

Place slats (#4,5) to the side rails (#3) as shown in the picture.
Secure by using screws (#G).
1) Please refer to steps (#5) on how to align and place concealed panels (#7) correctly.
2) Secure concealed panels (#7) to bed slats by using screws (#H).

This is how the concealed panels (#7) look
like on the bed from a high view.
ASSEMBLY COMPLETED

Rev: 18-07-19
CM7540EK
For more information contact our team: [email protected]

1) Prepare 4 bolts assembly by inserting washer (#C) onto
bolts (#B). Insert bolts (#B) to headboard (#1) 75% in, then
hook side rails (#3) to the bolts (#B) on headboard (#1).
Secure by inserting washer (#C) and wing nut (#D) from the
back of the headboard (#1) onto bolts (#B).
2) Align footboard (#2) to the bottom holes of the side rails
(#3). Insert bolts (#B) from footboard (#2) to side rails (#3),
then secure by inserting washer (#C) and wing nut (#D)
from the other end of the bolts (#B).
Align slat support legs (#6) to the
holes of the slats (#4,5). Secure by
using bolts (#A).

Place slats (#4,5) to the side rails (#3) as shown
in the picture. Secure by using screws (#G).
1) Please refer to steps (#5) on how to align and place concealed panels (#7) correctly.
2) Secure concealed panels (#7) to bed slats by using screws (#H).

This is how the concealed panels (#7)
look like on the bed from a high view.
ASSEMBLY COMPLETED