Furniture of America Therese CM-BK628 User manual

1 / 16
MODEL #
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
(Included)
Allen Wrench
Phillips
Screwdriver
(Not Included)
CM-BK628
VERSION # 21-05-12
3 - People
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 16

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.
3 / 16

4 / XXXXXX16

DAYBED
5 / 16
#1 1pc #2 1pc #3 1pc
#5 1pc #6 1pc #7 1pc
#4 1pc
#8 1pc
#9 1pc #10 2pcs
CM-BK628
#11 1pc #12 4pcs
#13 4pcs #14 6pcs
Lower End Guardrail
#15 1pc #16 1pc
Lower End Guardrail Center End Guardrail Center End Guardrail
Upper End Guardrail Upper End Guardrail Lower Front Side
Rail
Lower Back Side
Rail
Center Front Side
Rail
Upper/Center Front
Side Rail
Upper Front Side
Rail
Back Guardrail
Front Guardrail Guardrail Support Ladder Rail (R) Ladder Rail (L)

#A 36pcs #B 36pcs #C 14pcs #D 18pcs
#E 14pcs #F 32pcs #G 8pcs #H 24pcs
Bolt
Ø1/4" x 3-1/2"
#I 1pc
Wood Dowel
#10x40mm
Screw
#4x30mm
Screw
Ø1/4" x 2" Metal Dowel
#9x90mm
Allen Wrench
4mm
#17 1pc #18 1pc #19 7pcs #20 3set
Ladder Rail (R) Twin Slats Kit
(13pcs)
Ladder Rail (L) Ladder Rung
Barrel Nut
Ø1/4" x 1/2"
Bolt
Ø1/4" x 1-9/16"
Bolt
Ø1/4" x 1-3/16"
6 / 16
#J 18pcs
Hex Cap
Ø1/4" x 5/8"

7 / 16
Exploded View
#1
#2
#7
#8
#3
#4
#9
#10
#12
#13
#14
#14
#14
#14
#5
#6
#11
#10
#12
#13
#15
#16
#17
#18
#19
#19
#20
#20
#20

Carton Disignation Part Hardware
CM-BK628 is packed in 5 cases
8 / 16
#5
CM-BK628-1
Upper End Guardrail
#Ax36pcs
#Bx36pcs
#Fx32pcs
#Hx24pcs
#Ex14pcs
#Gx8pcs
#Cx14pcs
#Dx18pcs
#Ix1pc
CM-BK628-2
CM-BK628-3
CM-BK628-4
#6
Upper End Guardrail
#3
Center End Guardrail
#4
Center End Guardrail
#1
Lower End Guardrail
#2
Lower End Guardrail
#7
Lower Front Side Rail
#8
#9
#10
Lower Back Side Rail
Center Front Side Rail
Upper/Center Front
Side Rail
#Jx18pcs

Carton Disignation Part Hardware
CM-BK628 is packed in 5 cases
9 / 16
#11
Upper Front Side Rail
CM-BK628-5
CM-BK628-4
#12
Back Guardrail
#13
#14
#15
#16
#17
#18
#19
#20
Twin Slats Kit
Front Guardrail
Guardrail Support
Ladder Rail (R)
Ladder Rung
Ladder Rail (L)
Ladder Rail (R)
Ladder Rail (L)

ASSEMBLY INSTRUCTIONS
1
2
10 / 16
Part #1 x 1pc
Hardware #A x 8pcs
Hardware #B x 8pcs
Hardware #A x 14pcs
Part #2 x 1pc
Part #3 x 1pc
Part #7 x 1pc
Part #4 x 1pc
Part #9 x 1pc
Part #10 x 1pc
Hardware #B x 14pcs
Hardware #F x 12pcs
Part #8 x 1pc
Part #12 x 2pcs
Part #13 x 2pcs
#1
#2
#7
#8
#B
#A
#I
#B
#A
#I
#I
#B
#F
#A
#3
#4
#9
#10
#13
#12
Align lower end guardrails (#1,2) to
the lower side rails (#7,8), then
secure by using bolts (#A).
Attach dowels (#F) onto the guardrails (#12,13). Align
center side rails (#9,10) and guardrails (#12,13) to the
center end guardrails (#3,4), then secure by using bolts
(#A) onto barrel nuts (#B).

ASSEMBLY INSTRUCTIONS
3
4
11 / 16
Part #14 x 3pcs
Hardware #D x 9pcs
#D
#I
#14
#14
#14
#B
#A
#I
#I
#B
#F
#A
Hardware #A x 14pcs
Part #5 x 1pc
Part #6 x 1pc
Part #11 x 1pc
Hardware #B x 14pcs
Hardware #F x 12pcs
Part #12 x 2pcs
Part #13 x 2pcs #5
#6
#12
#13
#10
#11
Part #10 x 1pc
#J
Hardware #J x 9pcs
Align guardrail supports (#14) to the
rails of the center bunk, then secure
by using bolts (#D) onto nuts (#J).
Attach dowels (#F) onto the guardrails (#12,13).
Align upper side rails (#10,11) and guardrails
(#12,13) to the upper end guardrails (#5,6), then
secure by using bolts (#A) onto barrel nuts (#B).

ASSEMBLY INSTRUCTIONS
5
6
12 / 16
Hardware #G x 8pcs
Part #14 x 3pcs
Hardware #D x 9pcs #14
#14
#14
#G
#G
#G
#G
#G
#G
#D
#I
#J
Hardware #J x 9pcs
Align guardrail supports (#14) to the
rails of the upper bunk, then secure by
using bolts (#D) onto nuts (#J).
Insert dowels (#G) onto lower and
center bunk when stacking the bunk
beds together.

ASSEMBLY INSTRUCTIONS
7
8
13 / 16
Hardware #E x 4pcs
Part #18 x 1pc
Part #17 x 1pc
Part #15 x 1pc
Hardware #E x 10pcs
Part #16 x 1pc
Part #19 x 5pcs
#16
#15
#19
#E
#E
#E
#E
#E
#E
#E
#E
#E
#I
#E
#I
#E
#E
#E
#E
Part #19 x 2pcs
#17
#18
#19
Align ladder rungs (#19) to the ladder rails
(#15,16), then secure by using screws (#E).
Align ladder rungs (#19) to the ladder
rails (#17,18), then secure by using
screws (#E).

ASSEMBLY INSTRUCTIONS
9
10
Hardware #C x 14pcs
#I
#C
#I
#C
#F
Hardware #F x 8pcs
Hardware #H x 24pcs
Part #20 x 3set
#20
#20
#20
#H
#H
14 / 16
Insert dowels (#F) to both ladders,
then align the ladders to the bunk
bed. Secure by using bolts (#C).
Align slats (#20) to the bunk
beds, then secure by using
screws (#H).

11
15 / 16
ASSEMBLY INSTRUCTIONS

16 / 16